Wiznet WizFi630S User manual

WizFi630S Manual
© Copyright 2019 WIZnet Co., Ltd. All rights reserved. 1
WizFi630S User Manual
(Version 1.1.0)
© 2019 WIZnet Co., Ltd. All Rights Reserved.
For more information, please visit our website at http://www.wiznet.io/

WizFi630S Manual
© Copyright 2019 WIZnet Co., Ltd. All rights reserved. 2
Document Revision History
Date
Revision
Changes
2019-09-09
1.0
Release
2019-11-13
1.1
Typo correction

WizFi630S Manual
© Copyright 2019 WIZnet Co., Ltd. All rights reserved. 3
Contents
1. Summary of this guide ..........................................................................................5
1.1 Included chapters ......................................................................................... 5
2. Product overview....................................................................................................5
2.1 Product Features........................................................................................... 6
2.2 Wireless Features .......................................................................................... 7
2.3 HW Features .................................................................................................. 8
2.4 SW Features ................................................................................................... 8
2.5 Evaluation Board......................................................................................... 10
3. Operation Mode ...................................................................................................11
3.1 Access Point ................................................................................................. 11
3.2 Gateway ........................................................................................................ 11
3.3 Client (Station)............................................................................................. 12
3.4 AP-Client mode ........................................................................................... 13
4. Configuration Methods........................................................................................14
4.1 Configuration using Web Manager ........................................................ 14
4.2 Configuration using Command mode.................................................... 16
5. Network Settings..................................................................................................18

WizFi630S Manual
© Copyright 2019 WIZnet Co., Ltd. All rights reserved. 4
5.1 Interfaces...................................................................................................... 18
5.1.1 Web Manager .............................................................................................. 18
5.1.2 Command mode ......................................................................................... 19
5.1.3 Other Tabs .................................................................................................... 20
5.2 Wireless......................................................................................................... 21
5.2.1 Web Manager .............................................................................................. 21
5.2.2 Command mode ......................................................................................... 23
5.3 Switch ............................................................................................................ 24
5.4 Firewall.......................................................................................................... 25
6. STATEMENT ...........................................................................................................26

WizFi630S Manual
© Copyright 2019 WIZnet Co., Ltd. All rights reserved. 5
1. Summary of this guide
This guide provides the information needed to configure, use, and update the WizFi630S on the
WizFi630S-EVB. It is intended for software developers and system integrators who are embedding this
product into their designs.
1.1 Included chapters
◼Product overview: Main features of the WizFi630S and an Evaluation broad
◼Operation mode
◼Configuration methods: Instruction for accessing methods, Web manager and CLI
◼Network setting: Instruction for configuring network using Web Manager and CLI method
◼System setting: Introduction for adding new software and updating new firmware
2. Product overview
WizFi630S is a gateway module that include the UART protocol and TCP/IP protocol into
IEEE802.11 b/g/n wireless LAN protocol. WizFi630S enables a device with serial interface to
connect to LAN or WLAN for remotely control, measuring, and administration. WizFi630S can also work
as an IP router because of its internally embedded switch.
WizFi630S uses interfaces like Serial(UART), LAN, Wi-Fi(WLAN) to perform functions such as
Serial(UART)-To-Wi-Fi, Serial-To-Ethernet, Ethernet-To-Wi-Fi. Users can connect to WizFi630S’s internal
web server or use serial commands for simple Wi-Fi settings; not only serial devices but 8/16/32 bit
micro controllers can also use UART for simple Wi-Fi settings.
WizFi630S can significantly reduce the processes for wireless module design, testing, and certification.
Therefore, WizFi630S can be the best solution for users who lack wireless network experience.
WizFi630S follows the 802.11b/g/n standard and support up to 150Mbps speed in wireless interface.
WizFi630S provides a test board, pc software, and documents so that anyone can develop a wireless
solution.

WizFi630S Manual
© Copyright 2019 WIZnet Co., Ltd. All rights reserved. 6
2.1 Product Features
◼WizFi630A Pin compatible
◼580MHz Clock
◼16-bit DDR2 128Mbytes SRAM, 32Mbytes SPI Flash
◼Complies with IEEE802.11b/g/n.
◼Gateway/AP(Bridge)/AP-Client/Client(Station)/Ad-hoc Mode , WDS/Repeater supports
◼1T1R RF Interface (2.4G only)
◼Physical link rate up to 150Mpbs
◼Built-in 3 Ethernet Ports
◼2 Serial Ports supports
◼Working as Wi-Fi Router
◼WEP 64/128bit, WPA/WPA2-PSK TKIP, AES
◼Router and Firewall function supports

WizFi630S Manual
© Copyright 2019 WIZnet Co., Ltd. All rights reserved. 7
2.2 Wireless Features
Type
Description
Wireless Standard
IEEE802.11b/g/n
Frequency Range
802.11b: 2412 ~2462 MHz
802.11g: 2412 ~2462 MHz
802.11n HT20: 2412 ~2462 MHz
802.11n HT40: 2422 ~2452 MHz
Operating Channels
802.11b: 13 Channels
802.11g: 13 Channels
802.11n HT20: 13 Channels
802.11n HT40: 9 Channels
Output Power
(Tolerance(+/-1dBm))
802.11b: 11dBm@1Mbps
802.11g: 10dBm@6Mbps
802.11n HT20: 9.5dBm@MCS0
802.11n HT40: 7dBm@MCS0
Receive Sensitivity
802.11b: -48dBm@4% PER
Data Rates
802.11b: 1,2,5.5,11Mbps
802.11g: 6,9,12,18,24,36,48,54Mbps
802.11n: 29.5,86.5,115,130,144,150Mbps
Modulation Type
802.11b: DSS(CCK, QPSK, BPSK)
802.11g: OFDM(64QAM, 16QAM, QPSK, BPSK)
802.11n HT20: OFDM(64QAM, 16QAM, QPSK, BPSK)
802.11n HT40: OFDM(64QAM, 16QAM, QPSK, BPSK)
Antenna
u.FL (EVB : 1T1R 2dBi)
Encryption
64/128Bit WEP, WPA, WPA2, TKIP, AES, WAPI

WizFi630S Manual
© Copyright 2019 WIZnet Co., Ltd. All rights reserved. 8
2.3 HW Features
Type
Description
Interface
Serial port : 2 EA (optional 3EA)
LAN port : 3 EA
USB 2.0 Host : 1 EA
I2S : 1EA
I2C : 1EA
PWM : 4EA
U.FL(wireless)
Temperature
Operating: -25℃~+80℃
Humidity
TBD
Serial
Baud Rate : 115200(default)
Stop bits: 1, 2
Parity: None, Odd, Even
Flow Control: Not supported
Input Power
DC 3.3V / 1A
Power Consumption
TBD
Dimension
33mm X 43mm X 3mm
Weight
2.4 SW Features
Software features related to OpenWRT features
Type
Description
Operation Mode
Access Point(Bridge), Client(Station), AP-Client
Wireless
Radio Enable/Disable
SSID Hidden
Multi SSID
Rate Control
TX Power Control
Beacon Interval

WizFi630S Manual
© Copyright 2019 WIZnet Co., Ltd. All rights reserved. 9
DTIM Period
Fragment Length
Protocol
TCP, UDP, ARP, ICMP, DHCP, PPPoE, HTTP
Security
WEP 64/128bit
WPA/WPA2-PSK
MAC Address Filtering / Limiting
Network
Port Forwading(UDP and/or TCP)
DHCP Client / Server
WDS(Wireless Distribution System) Support
NAT
VLAN
Management
Administrator ID / PWD
Station & AP Association Information
SSH(Secure Shell) Support
Web based Configuration / Serial Command Configuration
Upgrade through WEB UI
Serial To Wi-Fi
2 Serial Port supports

WizFi630S Manual
© Copyright 2019 WIZnet Co., Ltd. All rights reserved. 10
2.5 Evaluation Board
User have to prepare below parts their own to use WizFi630S and WizFi630S-EVB.
Power source &
serial command line
Wireless
Ethernet

WizFi630S Manual
© Copyright 2019 WIZnet Co., Ltd. All rights reserved. 11
3. Operation Mode
3.1 Access Point
In this mode, all Ethernet ports and the wireless interface are bridged together. Wired/Wireless interface
has the same IP address space with its top mesh. DHCP Server function is disabled and
WizFi630S does not assign an IP. Wireless (LAN Port included) sending periodic Broadcast Packet to
Station and maintains a connection with Station
3.2 Gateway
When operating in router mode, interfaces are separated into WAN I/F (Internet Network), LAN I/F (Sub
Private Network: 192.168.16.xxx), and Wireless I/F (Sub Private Network: 192.168.16.xxx). Port#0 will be
assigned to the WAN Port. WizFi630S periodically sends Broadcast Packet to Sub-LAN (LAN Port included)
and maintains connection with Station

WizFi630S Manual
© Copyright 2019 WIZnet Co., Ltd. All rights reserved. 12
3.3 Client (Station)
Wireless I/F is assigned as WAN Port and all Ethernet Ports are bound to LAN Port. Set the profile and
the WizFi630S is automatically connected to the AP when re-booting in the future. Devices that are
connected through the LAN port are assigned a private IP. WizFi630S periodically sends PING Packet to
AP Gateway and maintains connection with AP.

WizFi630S Manual
© Copyright 2019 WIZnet Co., Ltd. All rights reserved. 13
3.4 AP-Client mode
Wireless I/F is assigned as WAN Port and all Ethernet Ports are bound to LAN Port. This mode is
similar to Station mode, however the difference is that the Wireless I/F will operate as client with AP
simultaneously. WizFi630S periodically sends Broadcast Packet to Sub-LAN (LAN Port included) and
maintains connection with Station.

WizFi630S Manual
© Copyright 2019 WIZnet Co., Ltd. All rights reserved. 14
4. Configuration Methods
There are 2 basic methods for logging into the WizFi630S module and setting up the operating modes
and other configurable settings.
◼Web Manager: View and configure all settings easily through a web browser.
◼Command Mode: There are a few methods for accessing Command Mode (CLI). making a
SSH connection, or connecting a PC or other host running a terminal emulation program to
the unit’s serial port.
4.1 Configuration using Web Manager
To use the Web Manager of WizFi630S, a network connection must be established between the PC and
the module. There are two ways to connect to the network.
◼Wireless: PC is connected to WizFi630S AP using Wi-Fi
◼Wired: Connect the WizFi630S-EVB's Ethernet interface to the same network as your PC.
After connecting between the devices, you can access the Web Manager using a standard web browser.

WizFi630S Manual
© Copyright 2019 WIZnet Co., Ltd. All rights reserved. 15
◼If your PC get a IP address from the WizFi630S module, you can access to Web Manager page
through 192.168.1.1 or http://wizfi630s/
The password is not set by default. Click Login without password to go to the setting screen, or click
“Go to password configuration…” to set the password.
The initial screen is shown below. Through Web Manager, you can check the status of the device and
make system and network related settings.

WizFi630S Manual
© Copyright 2019 WIZnet Co., Ltd. All rights reserved. 16
4.2 Configuration using Command mode
The Command Line Interface settings allow you to control how users connect to and interact with the
command line of the WizFi630S module. It is possible to configure access SSH protocol, in addition to
CLI options using Serial port.
To connect CLI to using Serial port. refer to the following image.
◼Default Baud rate: 115200
◼Default Data size: 8bit
◼Default Parity: none
◼Default Flow control: none (not supported)
After connecting between the devices, you can access the CLI using a terminal emulation program.

WizFi630S Manual
© Copyright 2019 WIZnet Co., Ltd. All rights reserved. 17
Then press Enter key to activate Serial CLI.

WizFi630S Manual
© Copyright 2019 WIZnet Co., Ltd. All rights reserved. 18
5. Network Settings
The Network Settings show the status of the WizFi630S module's interface/link and lets you configure
the settings on the device. Interface settings are related to the configuration of the IP and related
protocols.
The WizFi630S module contains two interfaces. The Ethernet interface is called eth0, and the WLAN
interface is called ra0, apcli0.
Some settings require a reboot to take effect.
5.1 Interfaces
Sections of the interfaces declare logical networks serving as containers for IP address settings, aliases,
routes, physical interface names they play a central role within the network configuration concept.
5.1.1 Web Manager
If WizFi630S connects to an existing network using the WAN port, configure it on the WAN tab.
If your Existing network supports DHCP Server, set “Protocol” to “DHCP Client” as shown below.
If the Existing network does not support DHCP Server or if you want to use defined IP address, set
“Protocol” to “Static address” and enter the IP information of the Existing network as below.

WizFi630S Manual
© Copyright 2019 WIZnet Co., Ltd. All rights reserved. 19
5.1.2 Command mode
to make the same we just did with Web Manager above, see below for more detailed explanation of the
steps.
You can show what is set using command below.
uci show network.wan
DHCP Client
1. type uci set network.wan.proto='dhcp' and press Enter
2. type uci commit && service network restart (this will save the changes and restart network
interfaces)
3. now you can connect the network cable from the WizFi630S’s WAN port to your existing

WizFi630S Manual
© Copyright 2019 WIZnet Co., Ltd. All rights reserved. 20
network (the other router’s LAN ports usually)
4. connect again to the WizFi630S at its new address as assigned from dhcp server
Static address
1. type uci set network.wan.proto='static' and press Enter
2. type uci set network.wan.ipaddr='ip-address-here' and press Enter
3. type uci set network.wan.netmask='subnet-mask-here' and press Enter
4. type uci commit && service network restart (this will save the changes and restart network
interfaces)
5. now you can connect the network cable from the device's WAN port to your existing network
(the other router's LAN ports usually)
6. connect again to the device at its new address as defined above
5.1.3 Other Tabs
Wi-Fi devices need to modify Interface-> LAN in order to connect to WizFi630S as Wired.
Also, in order for WizFi630S to connect wirelessly to the existing network, you need to set Interface->
WWAN.