Wolf CT15I/S User manual

Model CT15I/S
15" Induction Cooktop
Induction cooking has been used in
Europe for decades by professionals
and homeowners demanding the best
in performance. Induction cooking is
so efficient that it out-performs gas and
electric cooktops.There is no wasted
heat because energy is supplied directly
to the cooking vessel.You can keep
sauces and chocolates melted at 50
watts of power, or activate the Hi-Power
boost feature and boil water in nearly
half the time.
Accessories
Filler strip for installation of multiple
cooktops or modules
Bracket supports for installation of
two integrated modules with downdraft
(Model DD30 only)
Accessories are available through your
Wolf dealer. To obtain local dealer information,
visit the Showroom Locator section of our
website, wolfappliance.com.
Model CT15I/S
Stainless Steel Trim Finish Classic
Features
Classic stainless steel trim finish
Integrated design allows for installation of
multiple cooktops or modules
Easy-to-clean black ceramic glass surface
is resistant to scratching, staining, impact
and heat
Induction elements heat cookware, not the
glass, for a cooler, safer cooking surface
Two high-efficiency induction elements
deliver power and control
Maximum element power: 1800 W with
3000 W boost and 1200 W
True Simmer setting on rear element
Melt setting on front element
Cookware sensing—elements will not be
energized without an induction-compatible
pan on the cooktop surface
Hi-Power mode boosts rear element power
by diverting power from front element
Temperature limiter to ensure that safe
operating temperature of ceramic glass is
never exceeded
Illuminated touch controls with graduated
control lighting and adjustable sound
frequency and volume
Hot-surface indicator light in control panel
Lock mode—cooktop will be locked so that
no elements can be turned on
Universal OFF turns all elements off
Countdown timer with 1 to 99 minute
range
Model CT15I/S
Model CT15I/S
How does induction cooking work?
The electricity flows through a coil to
produce a magnetic field under the ceramic
cooktop. When a cast iron or magnetic
stainless steel pan is placed on the ceramic
glass surface, currents are induced in the
cooking utensil and instant heat is generated
due to the resistance of the pan. Induction
only works with cooking vessels made of
magnetic materials, such as cast iron and
magnetic stainless steel (it will not work
with aluminum or copper pots).
Hi-Power Boost Control

Model CT15I/S
15" Induction Cooktop
Installation Notes
The 15" induction cooktop can be installed
alone or in combination with other Wolf
cooktops or modules.
Complete installation specifications can be
found on our website, wolfappliance.com.
Unit dimensions may vary by ±
1
/ 8 ".
Specifications
Overall Width 15"
Overall Height 31/2"
Overall Depth 21"
Induction Elements Two
Recommended Cabinet Width
18" (one module) and 33" (two modules)
Minimum Cabinet Depth 223/4"
Countertop Cut-Out Width* 133/8"
Countertop Cut-Out Depth 191/4"
Minimum Height Clearance** 41/2"
Maximum Element Power 1200 W (front)
1800 W with 3000 W boost (rear)
Element Diameters 63/4" and 83/4"
Electrical Requirements 240/208 V AC
50/60 Hz, 20 amp circuit
Conduit 4' flexible 3-wire
Electrical Rating 3.6 kW at 240 V AC
3.1 kW at 208 V AC
Shipping Weight 30 lbs
*If the cooktop is to be used with any combination
of additional cooktop units or modules with a filler
strip, the cut-out width increases to 14".
**Minimum 6" clearance is required between
countertop and any combustible surface directly
below the cooktop.
Overall Dimensions
21"
(533)
OVERALL
DEPTH
15" (381)
OVERALL WIDTH
31/2" (89)
TERMINAL BOX
41/2" (114)
E
41/2" (114)
15"
(381)
15"
(381)
2"*min (51)
CUT-OUT TO
COMBUSTIBLE
MATERIALS
(BOTH SIDES)
133/8" (340)
COOKTOP CUT-OUT
WIDTH
133/8" (340)
COOKTOP CUT-OUT
WIDTH
33" (838) RECOMMENDED
CABINET WIDTH
18"
(457)
NOTE: Application shown allows for installation of two 15" (381) modules side-by-side with 33" (838) recommended cabinet width. 18" (457)
recommended cabinet width for installation of single 15" (381) cooktop or module. *Minimum clearance from both side edges of cooktop cut-ou
t
to combustible materials up to 18" (457) above countertop. **Minimum clearance from rear edge of cooktop cut-out to combustible materials up
to 18" (457) above countertop.
191/4" (489)
COOKTOP CUT-OUT
DEPTH
21/2"min
(64)
36" (914)
STANDARD
FLOOR TO
COUNTERTOP
HEIGHT
13" max
(330) 30" (762)
COUNTERTOP TO
COMBUSTIBLE
MATERIALS
ABOVE COOKTOP
FRONT OF COUNTERTOP
21/2"min
(64)
191/4" (489)
COOKTOP
CUT-OUT DEPTH
2"**
(51)
Installation Specifications
Dimensions in parentheses are in
millimeters unless otherwise specified.