Wolf IR304PE/S/PH User manual

Induction Ranges Use & Care Guide

2 | Wolf Customer Care 800.222.7820
Contents
4Safety Precautions
8Induction Range Features
9Oven Operation
16 Surface Operation
20 Care Recommendations
21 Troubleshooting
23 Wolf Warranty
INDUCTION RANGES
Customer Care
The model and serial number are printed on the enclosed
product registration card. Both numbers are also listed on
the product rating plate. Refer to page 8 for rating plate
location. For warranty purposes, you will also need the date
of installation and name of your authorized Wolf dealer.
Record this information below for future reference.
If your product ever needs attention, be sure to use a Wolf
factory certied service provider recommended by our
customer care center, or select one from our list of providers
available at wolfappliance.com/locator. All factory certi-
ed service providers are carefully selected and thoroughly
trained by us.
SERVICE INFORMATION
Model Number
Serial Number
Date of Installation
Certied Service Name
Certied Service Number
Authorized Dealer
Dealer Number
Important Note
To ensure this product is installed and operated as safely
and efciently as possible, take note of the following types
of highlighted information throughout this guide:
IMPORTANT NOTE highlights information that is especially
important.
CAUTION indicates a situation where minor injury or product
damage may occur if instructions are not followed.
WARNING states a hazard that may cause serious injury or
death if precautions are not followed.
IMPORTANT NOTE: Throughout this guide, dimensions in
parentheses are millimeters unless otherwise specied.

wolfappliance.com | 3
Thank You
Thank you for your purchase. We look forward to being part of your home for decades
to come. As a third-generation family-owned company, we take a very personal stake in
the preparation of your family’s food. We built our business and our reputation on helping
families serve the nest food possible.
With your purchase, you receive one of the strongest warranties in the appliance industry.
Take a moment to read the full warranty statement on page 23. It’s also important to
register your Wolf appliance to ensure that you don’t miss out on exclusive owner ben-
ets, such as; assurance that you will be taken care of in the unlikely event that service
becomes necessary during the warranty period, and a proof-of-purchase record in case
of a home insurance claim. You may register by one of the following options:
•Mail in the completed Wolf product registration card.
•Register online at wolfappliance.com/register and create a personalized My Sub-Zero/
Wolf account using the serial number on your product.
•Register by phone by calling Wolf Customer Care at 800-222-7820.
As a Wolf owner, you can count on ongoing support, day in and day out. Our customer
care center is available 24 hours a day, seven days a week and staffed by knowledgeable
product experts at our factory in Madison, Wisconsin. Should the need arise, simply call
800-222-7820 and speak with one of our product experts. They will help troubleshoot any
issues you might have.
We are condent this guide will answer your questions about the features, operation,
and maintenance of your Wolf, but if you have additional questions, please contact us at
800-222-7820 or visit us online at wolfappliance.com.

4 | Wolf Customer Care 800.222.7820
IMPORTANT INSTRUCTIONS
WARNING
A child or adult can tip this appliance and be
killed.
Verify the anti-tip device has been properly
installed and engaged. Ensure the anti-tip device
is re-engaged when this appliance is moved. Refer
to the illustrations below for how to verify correct
installation.
Do not operate this appliance without the anti-tip
device in place and engaged. Failure to do so
can result in death or serious burns to children or
adults.
To reduce the risk of burns, do not move this
appliance while hot.
SAFETY PRECAUTIONS
ANTI-TIP
DEVICE
ANTI-TIP
DEVICE
ENGAGED
Anti-tip device location. Anti-tip device engaged.
GENERAL SAFETY PRECAUTIONS
•Read this guide carefully before using this appli-
ance to reduce risk of re, electric shock or injury.
•Ensure proper installation and servicing. This appli-
ance must be properly installed and grounded by
a qualied technician. Have the installer show you
the location of the circuit breaker or fuse so that
you know where to turn off power.
•Warranty service must be performed by Wolf
factory certied service.
• Do not repair or replace any part of the appliance
unless it is specically recommended in literature
you received. All service should be referred to Wolf
factory certied service.
•IMPORTANT NOTE: Performance may be compro-
mised if the electrical supply is less than 240 volts.

wolfappliance.com | 5
SAFETY PRECAUTIONS
IMPORTANT INSTRUCTIONS
GENERAL SAFETY PRECAUTIONS
•Keep appliance area clear and free from combus-
tible material.
•Exercise caution when opening oven door. Let hot
air or steam escape before looking or reaching into
oven.
•Do not use aluminum foil to line any part of this
appliance.
•Be sure the oven cool air intake (above the door)
and oven exhaust vent (below the door) are unob-
structed at all times.
•Do not obstruct the ow of air to ensure proper
ventilation.
•Wear proper apparel. Loose-tting or hanging gar-
ments should never be worn using this appliance.
•Use extreme caution when moving a grease kettle
or disposing of hot grease.
•Use only dry pot holders when removing pans from
this appliance. Wet or damp pot holders can cause
steam burns. Do not use a towel or bulky cloth in
place of pot holders.
•Position oven racks in desired locations when oven
is cool. If a rack must be repositioned after the
oven is already hot, be sure pot holder does not
contact a hot heating element in the oven.
•Clean only those parts listed in this guide.
•Do not use oven cleaners. No commercial oven
cleaner or oven liner protective coating of any kind
should be used in or around any part of the oven.
•Before using self-clean, remove broiler pan, oven
racks, oven rack guides and any other utensils.
•Do not clean oven gasket; rubbing or moving the
gasket may compromise the door seal.
•Do not touch heating elements or interior surfaces
of oven. Heating elements may be hot even though
they are dark in color. Interior surfaces become hot
enough to cause burns. During and after use, do
not touch, or let clothing or other ammable mate-
rials contact heating elements or interior surfaces
of oven until they have had sufcient time to cool.
•Do not leave children alone or unattended in the
area where this appliance is in use. Never allow
children to sit or stand on the appliance.
•Do not store items of interest to children above or
at the back of this appliance, as they could climb
on the appliance to reach items and be injured.
•Do not heat unopened food containers, such as
baby food jars and cans. Pressure build-up may
cause the container to burst and cause injury.
•Do not store ammable materials in an oven, near
burners or let grease or other ammable sub-
stances accumulate on this appliance.

6 | Wolf Customer Care 800.222.7820
IMPORTANT INSTRUCTIONS
•Do not use water on grease res. Smother the ame
or use a dry chemical or foam-type extinguisher.
•Never leave this appliance unattended when in use.
Boilovers and greasy spills may smoke or ignite.
•Select cookware of the proper size, material and
construction for the particular type of cooking
being done. This unit is equipped with induction
elements of different size. Refer to element rating
on page 8.
• Never heat an empty pan. It may damage the
cooking surface or cookware and overheat the unit.
• Do not heat cookware with water droplets on the
outside of the pan. The droplets may begin to boil
and splatter. Cookware should always be dry.
•When using the cooking surface, do not touch
the glass surface directly above or adjacent to the
induction elements or zones. The glass surface
may become hot enough to cause burns.
•Always turn pan handles inward so they do not
extend over adjacent work areas, induction ele-
ments or edges of cooking surface to reduce the
risk of burns, ignition of ammable materials and
spillage due to unintentional contact with pan. Do
not turn handles toward the room, where they may
be bumped or easily hit.
SAFETY PRECAUTIONS
•Do not operate the induction elements if the glass-
ceramic surface is broken or severely pitted. Call
Wolf factory certied service to repair the range.
•Do not store ammable materials near hot compo-
nents or let grease or other ammable substances
accumulate on the cooking surface.
•Do not clean the induction surface while it is still
hot. If using a damp sponge or cloth, wait until the
surface has cooled sufciently to prevent steam
burns. Also, some cleaners give off noxious fumes
when applied to hot surfaces. Refer to care recom-
mendations on page 20.
•Do not use a griddle, open roaster or sh poacher
across two induction elements unless the bridge
element is turned on. This type of use without
the bridge element turned on could damage or
crack the glass. Refer to bridge element on
page 18.
•Do not block the cooling fan exhaust or intake
vents. The cooling fan automatically turns on to
cool internal parts. It may continue to run even
after the cooking surface has been turned off.

wolfappliance.com | 7
IMPORTANT INSTRUCTIONS
CALIFORNIA PROPOSITION 65
WARNING
This product may contain chemicals known to the
state of California to cause cancer or reproductive
harm.
SAFETY PRECAUTIONS
COMMONWEALTH OF MASSACHUSETTS
•Installations and repairs must be performed by a
qualied or licensed contractor, plumber or gas
tter, qualied or licensed by the state, province or
region where this appliance is being installed.

8 | Wolf Customer Care 800.222.7820
INDUCTION RANGE FEATURES
Induction Range Features
FEATURES
1Product Rating Plate
2Oven Control Panel (press to access)
3Oven Cooking Mode Selector Knob
4Oven Temperature Control Knob
5Convection Oven
6Surface Control Panel
7Induction Element
8Bridge Element
Getting Started
We know you are eager to start cooking, but before you
do, please take some time to read this use & care guide.
Whether you are an occasional cook or an expert chef, it
will be to your benet to familiarize yourself with the safety
practices, features, operation and care recommendations of
your Wolf induction range.
In induction cooking, the electricity ows through a coil to
produce a magnetic eld under the glass-ceramic surface.
When an induction-compatible pan is placed on the cooking
surface, currents are induced in the pan and instant heat is
generated. Cookware made of magnetic materials, such as
cast iron or magnetic stainless steel is required for induction
cooking.
To ensure all residual oil from the manufacturing process
has been removed, clean the range thoroughly with hot
water and mild detergent prior to use. Rinse and dry with a
soft cloth. Refer to care recommendations on page 20.
To ensure the best results, review cooking modes and
special features on page 12.
CAUTION
Do not place cookware on the oven oor or use
aluminum foil or other material to line the oven oor or
side walls. Failure to adhere to this notice will damage
the porcelain interior and will void your warranty.
INDUCTION ELEMENT RATING
30" RANGE W
101/2"(267) 2600 | 3150 boost
(2) 8" (203) 2100 | 3000 boost
6" (152) 1400
36" RANGE W
101/2"(267) 2600 | 3700 boost
(4) 8" (203) 2100 | 3000 boost
36" induction range shown.
4
5
1
2
87
3
6

wolfappliance.com | 9
The bottom oven rack has a full-extension capability which
is supported by the oven door. With the rack in the lowest
rack guide position, slide it onto the door guides for greater
stability and accessibility. Refer to the illustration below.
To insert a full-extension easy glide rack, place the two rear
tabs onto the rack guide (one tab above and one below).
Refer to the illustration below. Angle the rack slightly and
slide back until the front rack notch engages the front rack
guide.
Oven Racks
OVEN RACK GUIDES
To insert the rack guides in the oven, locate the mounting
screws on the oven side walls. Place the rack guide
mounting tabs over the screws and slide down until fully
seated. Refer to the illustration below.
OVEN RACKS
To insert a standard rack in the oven, place the rack anti-tip
lock under the side rack guide rails. Slide the rack back and
lift up to clear the rack stops. Continue to slide the rack
back until completely inside the oven. Refer to the illustra-
tion below.
OVEN OPERATION
MOUNTING
TAB
MOUNTING
SCREW
ANTI-TIP
LOCK
RACK STOP
Oven rack guides. Oven rack anti-tip lock.
REAR TABS
NOTCH
Bottom rack. Full-extension rack.

10 | Wolf Customer Care 800.222.7820
OVEN LIGHT
The oven light turns on automatically when the door is open
and off when closed. To turn the light on while the door is
closed, touch OVEN LIGHT on the control panel.
PREHEAT
During preheat, the oven is heated as quickly and evenly
as possible and is not ideal for cooking. Preheat should
be utilized for all cooking modes except broil and con-
vection broil. During preheat, temperatures below 150°F
(65°C) appear as ‘Lo’. Once preheat is complete, an audible
chime indicates the oven has reached set temperature and
the oven indicator light is no longer illuminated. To adjust
temperature once preheat is complete, turn the knob to the
desired temperature.
PRIOR TO USE
To ensure all residual oil from the manufacturing process
has been removed, each oven must go through the fol-
lowing procedure.
1Clean oven thoroughly with hot water and mild deter-
gent. Rinse and dry with a soft cloth.
2Turn on ventilation. Some smoke and odor is normal.
3Rotate mode selector knob to ROAST and adjust tem-
perature to 550°F (290°C) for one hour.
4Rotate mode selector knob to OFF and allow oven to
cool with the door closed.
OVEN OPERATION
Oven Operation
Wolf induction ranges utilize a combination of a cooking
mode selector knob, oven temperature control knob and
electronic control panel to select desired cooking modes,
oven temperature and exclusive features. Open the control
panel by pressing .
Temperatures are displayed in Fahrenheit. To change to
Celsius, touch and hold CLOCK for 5 seconds. Touch
COOK TIME to alternate between °F and °C, then touch
ENTER.
When using the oven, Wolf has created a two-step process
to ensure it is never accidentally turned on:
1Rotate cooking mode selector knob to desired cooking
mode. Convection modes are indicated by . Refer to
the illustration below. Once desired cooking mode is
selected, a preset temperature will appear on the tem-
perature control knob.
2Select the preset temperature by touching ENTER on
the control panel or turn temperature control knob to
increase or decrease temperature. Either action com-
pletes the second step of the process. Oven indicator
light illuminates and preheat begins.
TIMER
TEMPERATURE
CONTROL KNOB
COOKING MODE
SELECTOR KNOB
Oven controls.

wolfappliance.com | 11
OVEN OPERATION
Oven Operation
CLOCK
The clock is visible on the control panel during all cooking
modes, except when the timer is in use. It is very important
the clock is set to the correct time if the cook time or stop
time feature is used. The clock must be reset after a power
outage.
Setting clock:
1Touch CLOCK on the control panel.
2Use up and down arrows to set time of day. Time will
change from am to pm by passing 12:00.
3Touch CLOCK. An audible chime indicates time has
been set.
4To change to 24-hour clock, press and hold CLOCK for
5 seconds. Touch CLOCK, then ENTER.
CLOCK STANDBY POWER
The range is shipped in standby power mode which dis-
ables the clock approximately 10 minutes after the cooling
fan operation is complete or the oven is inactive. The clock
will illuminate after any touch of the controls or oven use.
Enable | disable standby power:
1Touch and hold CLOCK on the control panel for 5
seconds.
2Touch STOP TIME to toggle on or off, then touch
ENTER.
TIMER
The timer on the oven control panel can be set for a
maximum of 9 hours, 59 minutes. Once a time is set, the
countdown is illuminated on the control panel display. The
last minute counts down in seconds. The timer is indepen-
dent from the oven. Setting the timer does not affect cook
time or stop time. For information regarding auto program
features, refer to page 14.
Setting timer:
1Touch TIMER on the oven control panel.
2Use up and down arrows to set time in hours and
minutes.
3Touch TIMER to start. An audible chime indicates timer
has been set. Oven will chime and time will ash when
complete. Timer will continue to chime until CLEAR is
touched on the control panel.

12 | Wolf Customer Care 800.222.7820
OVEN OPERATION
Cooking Modes
MODE MODE KNOB PRESET RANGE PROBE USES
Convection CONV 325°F
(165°C)
170– 550°F
(75– 290°C)
•Uniform air movement makes it possible to multi-level rack
cook with even browning.
Convection Bake BAKE 375°F
(190°C)
170– 550°F
(75– 290°C)
•Ideal for pie baking.
Convection Broil BROIL Br1
Br2
Br3
550°F (290°C)
450°F (230°C)
350°F (175°C)
Shortens broiling times for thicker cuts of meat, sh and
poultry. Utilize two-piece broiler pan and always broil with
oven door closed.
Convection Roast ROAST 325°F
(165°C)
170– 550°F
(75– 290°C)
•Perfect for roasting tender cuts of beef, lamb, pork and
poultry.
Bake BAKE 350°F
(175°C)
170– 550°F
(75– 290°C)
•Best for single-rack cooking, primarily baked foods. Use
for standard recipes.
Broil BROIL Br1
Br2
Br3
550°F (290°C)
450°F (230°C)
350°F (175°C)
Best for broiling meats, sh and poultry pieces up to 1"
thick. Utilize two-piece broiler pan and always broil with
oven door closed.
Roast ROAST 350°F
(175°C)
170– 550°F
(75– 290°C)
•Best for roasting less tender cuts of meat, such as chuck
roasts and stew meat that should be covered.
Bake Stone STONE 400°F
(205°C)
170– 550°F
(75– 290°C)
•Baking on a ceramic stone. Great for pizza and bread.
Bake stone accessory required.
Dehydration CONV 135°F
(60°C)
110– 160°F
(45– 70°C)
Dry a variety of fruits, vegetables and meats. Accessory
racks required. Refer to page 13.
Self-Clean CLEAN Oven heats to an extremely high temperature to allow food
soil to burn off. Refer to page 14.
O
F
F
B
A
K
E
B
R
O
I
L
R
O
A
S
T
S
T
O
N
E
C
L
E
A
N
C
O
N
V
R
O
A
S
T
B
R
O
I
L
B
A
K
E
O
F
F
B
A
K
E
B
R
O
I
L
R
O
A
S
T
P
R
O
O
F
C
L
E
A
N
C
O
N
V
R
O
A
S
T
B
R
O
I
L
B
A
K
E
O
F
F
B
A
K
E
B
R
O
I
L
R
O
A
S
T
S
T
O
N
E
C
L
E
A
N
C
O
N
V
R
O
A
S
T
B
R
O
I
L
B
A
K
E
Cooking mode selector knob.

wolfappliance.com | 13
Temperature Probe
The temperature probe measures the internal temperature
of food while cooking. It can be used with all cooking
modes except broil and convection broil.
Setting controls:
1Rotate mode selector knob to desired cooking mode.
2Touch ENTER to select preset temperature or turn tem-
perature control knob to change temperature.
3Insert probe into the thickest area of food. When making
bread, cook for approximately 10 minutes before
inserting probe.
4When preheat is complete, use a pot holder to lift probe
receptacle cover, then insert probe. Refer to the illustra-
tion below.
5Probe temperature is preset to 160°F (70°C). Touch
ENTER to select preset temperature or turn temperature
control knob to change temperature. Display alternates
between oven set temperature and actual probe temper-
ature. To alternate between probe set point and actual
probe temperature, press PROBE. Temperatures below
70°F (20°C) are displayed as ‘Lo.’
6An audible chime indicates internal temperature has
reached probe set point. Remove, then reinsert probe to
verify internal temperature.
CAUTION
Probe and probe receptacle will be very hot. Handle
with care.
OVEN OPERATION
Proof
Setting controls:
1Rotate mode selector knob to BAKE.
2Turn temperature control knob left until ‘PrF’ is dis-
played, then release.
3Oven temperature is preset to 85°F (30°C). Touch ENTER
to select preset temperature or turn temperature control
knob to change temperature. Display alternates between
set temperature and ‘PrF.’
Dehydration
Accessory kit required. Accessories are available through an
authorized Wolf dealer. For local dealer information, visit the
nd a showroom section of our website, wolfappliance.com.
Setting controls:
1Place door stop supplied with accessory kit, onto oven
door lock.
2Rotate mode selector knob to CONV.
3Turn temperature control knob left until ‘dEH’ is dis-
played, then release.
4Oven temperature is preset to 110°F (45°C). Touch
ENTER to select preset temperature or turn temperature
control knob to change temperature. Display alternates
between set temperature and ‘dEH.’
Probe receptacle.

14 | Wolf Customer Care 800.222.7820
OVEN OPERATION
Self-Clean
During self-clean, the oven is heated to an extremely high
temperature to burn off food soil. Remove all oven racks
and rack guides. They will discolor if left in during self-clean.
The oven door will lock and remain locked until self-clean
is complete and oven temperature has cooled below 300°F
(150°C). Self-clean times include one hour for cool down.
Setting controls for 4-hour self-clean:
1Rotate mode selector knob to CLEAN.
2Touch ENTER.
Setting controls for 3-hour self-clean:
1Rotate mode selector knob to CLEAN.
2Touch STOP TIME.
3Touch down arrow to reduce stop time by 1 hour.
4Touch ENTER twice.
CAUTION
During self-clean, exterior surfaces may get hotter than
usual. Children should be kept away.
Auto Program
TIMED COOK
Timed cook automatically turns the oven off at a specied
time. The oven will begin to heat immediately and will turn
off at the desired stop time. The clock must be set to the
correct time for timed cook to function properly. Use in
any cooking mode except broil, convection broil and bake
stone.
Setting controls:
1Rotate mode selector knob to desired cooking mode.
2Touch ENTER to select preset temperature or turn tem-
perature control knob to change temperature.
3Touch COOK TIME. Use arrows to select desired cook
time in hours and minutes.
4Touch ENTER.
DELAYED START
Delayed start automatically turns the oven on and off at
specied times. The oven will remain idle until the desired
start time and will turn off at the desired stop time. The
clock must be set to the correct time for delayed start to
function properly. Use in any cooking mode except broil,
convection broil and bake stone.
Setting controls:
1Rotate mode selector knob to desired cooking mode.
2Touch ENTER to select preset temperature or turn tem-
perature control knob to change temperature. If ENTER
is touched, oven will begin to heat immediately, but will
enter idle mode once stop time is set.
3Touch COOK TIME. Use arrows to select desired cook
time in hours and minutes.
4Touch STOP TIME. Use arrows to select desired time
oven should turn off.
5Touch ENTER.

wolfappliance.com | 15
OVEN OPERATION
Sabbath (oven only)
This appliance is certied by Star-K to meet strict religious
regulations in conjunction with specic instructions found
on www.star-k.org.
Sabbath overrides the automatic 12-hour shut off feature.
Sabbath must be reset after a power outage.
Setting controls:
1Turn oven light on or off.
2Rotate mode selector knob to BAKE or ROAST and
select desired temperature.
3Touch and hold ENTER for 5 seconds. ‘SAb’ will appear
and ash on oven control knob indicating Sabbath mode
has been initiated.
4To change oven temperature while in Sabbath mode,
turn temperature control knob. Each turn will increase
or decrease temperature by 10° (F or C). Display and
audible chime are disabled, but temperature will ran-
domly change after new temperature is selected. Oven
will remain on until mode selector knob is rotated to OFF.
Oven Light
WARNING
Verify power is disconnected from the electrical box
before replacing a light bulb.
Allow the oven to cool completely, then remove oven racks
and rack guides. To remove the light cover, gently pry the
bottom edge with a at screwdriver. Remove the existing
bulb and replace with a 20-watt halogen bulb. Refer to the
illustration below.
LIGHT
COVER
Light bulb replacement.

16 | Wolf Customer Care 800.222.7820
SURFACE OPERATION
Surface Operation
CONTROL PANEL
The control panel features illuminated touch controls that
are invisible when the cooking surface is off. A power level
indicator for each control displays the heat setting from SIM
(MLT) to HI. Each control is positioned to the corresponding
induction element. Refer to the illustration below.
Indicators on the control panel will illuminate to indicate
specic surface operation. Refer to the chart below.
INDICATORS
Control Panel Lock
Element(s) On
Hot Surface
Timer Set
Boost Mode
Front-to-Back Bridge
Side-to-Side Bridge
All Bridge
CAUTION
Do not place hot cookware directly over the control
panel.
CONTROL PANEL LOCK
The control panel lock feature prevents unwanted surface
operation. Touch and hold LOCK for three seconds to lock
and unlock the control panel. will illuminate when the
control panel is locked.
The control panel will automatically lock after 10 minutes
of inactivity. This automatic lock feature can be disabled
through the extended options menu. Refer to page 19.
When the range is powered up for the rst time and after
a power outage, the induction surface will default to lock
mode.
Touch controls.
ELEMENT
CONTROL

wolfappliance.com | 17
SURFACE OPERATION
Surface Operation
POWER LEVEL INDICATOR
When an element is activated, a power level indicator will
illuminate above the corresponding control indicating the
level of heat. The lowest heat is represented by the small
ame, varying levels of heat by additional indicators (dots),
and the highest heat by all indicators including the large
ame. Refer to the chart and illustration below.
SETTING POWER LEVEL USES
Melt 1 (small ame)
indicator
Melting butter, holding
chocolate and sauces.
Simmer 2–6 indicators Simmering sauces and
steaming rice.
Medium 6–7 indicators Making French toast and
pancakes, heating milk, cream
sauces, soups and gravies.
Medium High 7-8 indicators Sauteing, browning and frying.
High 8–10 (large ame)
indicators
Boiling water, searing meat and
canning.
Power level indicator.
SINGLE ELEMENT | INNER ZONE
Setting controls:
1To activate a induction element, touch ON/OFF for the
desired single element on the control panel. Power level
indicator will ash and all indicators for that zone will
ash. Refer to the illustration below.
2To complete the activation, touch HI for highest heat,
SIM (MLT) for lowest heat, BOOST to activate boost
mode, or touch desired power level indicator.
3To change heat setting while the element is on, touch or
slide to desired power level.
4To turn element off, touch ON/OFF.
IMPORTANT NOTE: If no cookware or an incompatible pan
is placed on an induction element after activation, the con-
trol will ash for 30 seconds, then the element will turn off
automatically.
Element activation.
ON/OFF

18 | Wolf Customer Care 800.222.7820
SURFACE OPERATION
Surface Operation
BOOST MODE
Boost mode boosts power on one element by diverting
power from an adjacent element. If the adjacent element is
on high, the power output will be reduced. The reduction in
power will be displayed on the power level indicator of the
adjacent element. Refer to the illustration below. will
illuminate when an element is in boost mode.
Boost mode will deactivate automatically after approxi-
mately 15 minutes of continuous operation and can be
reactivated if desired.
BRIDGE ELEMENT
Setting controls:
1To activate bridge, select desired power level on one of
the single elements.
2Touch BRIDGE between corresponding element con-
trols to bridge elements front to back, BRG to bridge
elements side to side, or ALL BRIDGE to bridge all
elements. , or will illuminate respectively.
3To change power level, adjust the power level on any
active bridged element.
4To turn off, touch ON/OFF on any active bridged
element.
ALL BRIDGE should be used for cookware larger than
12" (305) in diameter. For smaller cookware, use the right
rear element.
GRIDDLE USE
The bridge element provides an oblong heating area for use
with a griddle, open roaster or sh poacher.
To preheat a griddle, set the bridge element power level to
high for ve minutes, then reduce for cooking.
CAUTION
A griddle, open roaster or sh poacher should not be
used when the bridge element is off or with any other
combination of heating elements.
Boost mode.
BOOST

wolfappliance.com | 19
SURFACE OPERATION
Surface Operation
TIMER
The surface timer can be set in one-minute increments up
to 99 minutes. Once a time is set, will illuminate on the
surface control panel and the countdown is visible on the
timer display. The timer is independent from the cooking
surface. Refer to the illustration below.
Setting timer:
1Touch TIMER.
2Touch and hold + or – until desired time is shown in the
timer display. Timer will begin the countdown in minutes.
3Timer will chime with one minute left and completes the
countdown in seconds.
4When complete, timer will chime and continue to chime
until TIMER is touched.
HOT SURFACE INDICATOR
will illuminate on the surface control panel and may
remain illuminated even when the induction surface is off.
ALL OFF
When one or more induction elements are on, will illu-
minate on the surface control panel. To turn off all elements
at the same time, touch ALL OFF. Refer to the illustration
below.
EXTENDED OPTIONS
The extended options feature allows the user to set pref-
erences for volume, tone and surface control panel lock
feature.
Setting adjustment:
1While unit is off and unlocked, touch and hold ALL OFF
for ve seconds.
2Power level 1 on the rear element control will be dis-
played and ‘VO’ will appear on the timer display.
Touch SIM (MLT) or HI on the front element control to
adjust volume.
3Touch + on the timer control to adjust tone. Power level
2 on the rear element control will be displayed and ‘Fr’
will appear on the timer display.
Touch SIM (MLT) or HI on the front element control to
adjust tone.
4Touch + on the timer control to adjust the automatic
control panel lock. Power level 3 on the rear element
control will be displayed and ‘Lo’ will appear on the timer
display.
Touch SIM (MLT) or HI on the front element control to
turn the automatic lock feature off or on respectively.
5Touch ALL OFF at any time while in extended options to
conrm settings and return to idle.
Timer controls. All off.
TIMER
ALL OFF

20 | Wolf Customer Care 800.222.7820
CARE RECOMMENDATIONS
Care Recommendations
CLEANING
Stainless steel Use a nonabrasive stainless steel cleaner and apply with a soft lint-free cloth. To bring out the natural luster,
lightly wipe surface with a water-dampened microber cloth followed by a dry polishing chamois. Always
follow the grain of stainless steel.
Glass-ceramic surface Allow to cool. Use a spray degreaser to remove ngerprints and a non-abrasive Ceran® cooktop cleaner for
food soil. Do not allow any item that could melt to come in contact with the glass-ceramic surface when hot.
If this occurs, use the razor blade scraper provided with the range to remove.
Control panel Use a spray degreaser to remove ngerprints and food soil. Spray on a cloth before wiping panel.
IMPORTANT NOTE: Do not spray cleaners directly on the control panel.
Control knobs Using a damp cloth, wipe with a mild detergent or spray degreaser; rinse and dry. Do not place in
dishwasher.
Oven rack guides Remove and place on a at surface near the sink. Clean with hot water and mild detergent or paste of
baking soda and water. Do not immerse in water. Towel dry.
Oven interior Before utilizing the self-clean feature, use a razor blade to gently lift baked on foods from the oven cavity
and window. For stubborn stains, spray with a mild abrasive cleaner or spray degreaser and scrub with a
no-scratch Scotch-Brite™ pad (pink or blue). Wash the entire oven cavity with soap and water to remove
cleaning chemicals before entering self-clean mode. If residue is not cleaned from the cavity, etching of the
porcelain may occur. Once the self-clean cycle is complete, allow the oven to cool completely and wipe out
ash with a damp cloth.
Broiler pan To clean the upper rack, use a mild detergent and scouring pad. Rinse and dry. To clean the bottom pan,
discard grease and wash with hot water and mild detergent. Rinse and dry. The stainless steel upper rack is
dishwasher safe, however, do not place any porcelain-coated rack or pan in dishwasher.