Wolf CT30I/S User manual

30" Framed Induction Cooktop
Induction cooking has been used in
Europe for decades by professionals
and homeowners demanding the best in
performance. They are 90-95% energy
efficient; as a result, no heat is wasted
because energy is supplied directly to
the cooking vessel. ith olf’s unframed
induction cooktops there’s no stainless
steel trim, just the sophisticated,
minimalist exterior subtly patterned
design to hide any unsightly scratches.
ACCESSORIES
•Filler strip for installation of multiple
cooktops or modules.
Accessories are available through your authorized
Wolf dealer. For local dealer information, visit the
find a showroom section of our website,
wolfappliance.com.
FEATURES
•tainless steel trim finish.
•Easy-to-clean black ceramic glass surface
is resistant to scratching, staining, impact
and heat.
•Induction elements heat cookware, not the
glass, for a cooler, safer cooking surface.
•Four high-efficiency induction elements
deliver power and control.
•Maximum element power: (2) 1800 W with
3000 W boost and (2) 1200 W.
•True simmer setting on two elements.
•Melt setting on two elements.
•Cookware sensing—elements will not be
energized without an induction-compatible
pan on the cooktop surface.
•Hi-Power mode boosts power on 1800 W
elements by diverting power from adjacent
element.
•Temperature limiter to ensure that safe
operating temperature of ceramic glass is
never exceeded.
•Illuminated touch controls with graduated
control lighting and adjustable sound
frequency and volume.
•Hot-surface indicator light in control panel.
•Lock mode—cooktop will be locked so
that no elements can be turned on.
•Universal OFF turns all elements off.
•Countdown timer with 1 to 99 minute
range.
Hi-Power boost control.
Model CT30I/S
HO DOES INDUCTION
COOKING ORK?
The electricity flows through a coil to
produce a magnetic field under the ceramic
cooktop. When a cast iron or magnetic
stainless steel pan is placed on the ceramic
glass surface, currents are induced in the
cooking utensil and instant heat is gener-
ated due to the resistance of the pan.
Induction only works with cooking vessels
made of magnetic materials, such as cast
iron and magnetic stainless steel (it will not
work with aluminum or copper pots).

30" Framed Induction Cooktop
INSTALLATION NOTES
The 30" induction cooktop can be installed
above a Wolf L series or E series built-in
single oven.
Complete installation specifications can be
found on our website, wolfappliance.com.
Unit dimensions may vary by ± 1/8".
SPECIFICATIONS
Overall Width 30"
Overall Height 21/2"
Overall Depth 21"
Induction Elements Four
Countertop Cut-Out Width* 283/8"
Countertop Cut-Out Depth 191/4"
Maximum Element Power (2) 1200 W
(2) 1800 W with 3000 W boost
Element Diameters 51/2", 63/4" and (2) 83/4"
Electrical Requirements 240/208 V AC
50/60 Hz, 40 amp circuit
Conduit 4' flexible 3-wire
Electrical Rating 7.2 kW at 240 V AC
6.3 kW at 208 V AC
hipping Weight 48 lbs
*If the cooktop is to be used with any combina-
tion of additional cooktop units or modules with a
filler strip, the cut-out width increases to 29".
OVERALL DIMENSIONS
30" (762)
21/2" (64)
11/4" (32) 7/8" (22)
ALL SIDES
TERMINAL BOX
21" (533)
18" (457) min
36" (914)
FLOOR TO
COUNTERTOP
30" (762) min
COUNTERTOP
TO COMBUSTIBLE
MATERIALS
41/2" (114)
10" (254)
31/2" (89) E
SEE COUNTERTOP
CUT-OUT BELOW
2" (51) TO
COMBUSTIBLE*
2" (51) TO
COMBUSTIBLE*
SIDE
CABINET
13" (330)
max
283/8" (721)
CUT-OUT WIDTH
COUNTERTOP CUT-OUT
FRONT
191/4" (489)
CUT-OUT
DEPTH
21/2" (64) min
2" (51) min*
FRONT VIEWSIDE VIEW
*Minimum clearance from cooktop cut-out to combustible materials up to 18" (457) above countertop.
NOTE: Electrical location applies only to installation with built-in oven.
INSTALLATION SPECIFICATIONS
Dimensions in parentheses are in
millimeters unless otherwise specified.
©Wolf Appliance, Inc. all rights reserved. Features and specifications are sub ect to change at any time without notice. 12/11
Countertop Cut-Out Dimensions