Wolf PW482210R Owner's manual

USE &CARE INFORMATION
PRO VENTILATION HOODS

CONTENTS
Introducing Wolf Pro Ventilation Hoods 3
Safety Instructions & Precautions 4
Wolf Pro Ventilation Hood Features 8
Wolf Pro Ventilation Hood Use & Care 14
Wolf Troubleshooting Guide 17
Wolf Service Information 18
Wolf Warranty 19
As you read this Use & Care Information,
take particular note of the CAUTION and
WARNING symbols when they appear.
This information is important for safe and
efficient use of the Wolf equipment.
In addition, this Use & CareInformation may
signal an IMPORTANT NOTE which highlights
information that is especially important.
signals a situation where minor injury or
product damage may occur if you do not
follow instructions.
states a hazard that may cause serious
injury or death if precautions are not
followed.
WOLF®is a registered trademark of Wolf Appliance Company, Inc.

3
THANK YOU
Your purchase of a Wolf Pro ventilation hood
attests to the importance you place upon the
quality and performance of your cooking
equipment. We understand this importance
and have designed and built your ventilation
hood with quality materials and workmanship
to give you years of dependable service.
We know you are eager to start cooking, but
before you do, please take some time to read
this Use & Care Information. Whether you are
abeginning cook or an expert chef, it will be
to your benefit to familiarize yourself with the
safety practices, features, operation and care
recommendations of the Wolf Pro ventilation
hood.
We appreciate your choice of a Wolf
Appliance product and welcome any sugges-
tions or comments you may have. Toshare
your opinions with us, call 800-332-9513.
Your Wolf ventilation hood is protected by a
warranty that is one of the finest in the
industry. Take a moment to read the warranty
statement on page 19 and refer to it should
service become necessary.
INTRODUCING WOLF PRO VENTILATION HOODS
CONTACT
INFORMATION
Wolf Customer
Service:
800-332-9513
Website:
wolfappliance.com

Installation work and electrical
wiring must be done by qualified
person(s) in accordance with all
applicable codes and standards,
including fire-rated construction
codes and standards.
Sufficient air is needed for proper
combustion and exhausting of gases
through the flue (chimney) of fuel-
burning equipment to prevent
backdrafting.
4
Read this Use & Care Information
carefully before using your new
ventilation unit to reduce the risk of
fire, electrical shock or injury to
persons.
Use this unit only in the manner
intended by Wolf Appliance
Company. If you have questions,
contact us at 800-332-9513.
Before servicing or cleaning unit,
switch power off at service panel
and lock the service disconnecting
means to prevent power from being
switched on accidentally. When the
service disconnecting means cannot
be locked, securely fasten a
prominent warning device, such as
atag, to the service panel.
SAFETY INSTRUCTIONS AND PRECAUTIONS
To reduce the risk of electric
shock, this fan should only be
used with fan speed control
CM-18RT1 and CM-18RSTU2
(809403), manufactured by Trivar
Laboratories, Inc.
To reduce the risk of fire, electric
shock or injury to persons,
observe the following:
READ AND SAVE THESE INSTRUCTIONS

5
Follow the heating equipment
manufacturer’s guidelines and safety
standards, such as those published
by the National Fire Protection
Association (NFPA), the American
Society for Heating, Refrigeration
and Air Conditioning Engineers
(ASHRAE) and the local code
authorities.
When cutting or drilling into wall or
ceiling, do not damage electrical
wiring or other hidden utilities.
To reduce the risk of fireor electric
shock, do not use this hood with an
additional speed control device.
To reduce the risk of fire and to
properly exhaust air, be certain to
duct air outside. Do not vent
exhaust air into spaces within
walls or ceilings or into attics,
crawl spaces or garages.
Ducted fans must always be vented
to the outdoors.
To reduce the risk of fire, use only
metal ductwork.
This unit must be grounded.
For best capture of cooking
impurities, the bottom of the hood
should be a minimum of 30" (762)
and a maximum of 36" (914) above
the countertop.
This product may have sharp
edges. Be careful to avoid cuts and
abrasions during installation and
cleaning.
Please read specification label on
product for further information and
requirements.

6
SAFETY INSTRUCTIONS AND PRECAUTIONS
TO REDUCE THE RISK OF A COOKTOP
GREASE FIRE:
Never leave surface units
unattended at high settings.
Boilovers cause smoking and greasy
spillovers that may ignite. Heat oils
slowly on low or medium settings.
Always turn hood ON when cooking
at high heat or when flambéing food
(i.e. Crepes Suzette, Cherries
Jubilee, Peppercorn Beef Flambé).
Clean ventilating fans frequently.
Grease should not be allowed to
accumulate on fan or filter.
Use proper pan size. Always use
cookwareappropriate for the size of
the surface element.
TO REDUCE THE RISK OF INJURY
TO PERSONS IN THE EVENT OF
A GREASE FIRE, OBSERVE THE
FOLLOWING:
Smother flames with a close-
fitting lid, baking sheet or other
metal tray, then turn off the gas
burner. Be careful to prevent
burns. If the flames do not go out
immediately, evacuate and call
the fire department.
Do not use water, including wet
dishcloths or towels—a violent
steam explosion will result.
Never pick up a flaming pan—
you may be burned.
READ AND SAVE THESE INSTRUCTIONS

USE AN EXTINGUISHER ONLY IF:
You know you have a Class ABC
extinguisher and you already know
how to operate it.
The fire is small and contained in
the area where it started.
The fire department is being called.
You can fight the fire with your back
to an exit (NFPA Fire Safety Tips).
7
To avoid motor bearing damage and
noisy and/or unbalanced impellers,
keep drywall spray, construction
dust, etc., off blower.
Two installers are recommended
because of the large size and weight
of this hood.
Your hood motor has a thermal
overload that will automatically
shut off the motor if it becomes
overheated. The motor will restart
when it cools down. If the motor
continually shuts off and restarts,
contact a Wolf authorized service
center.
Avoid using food products that
produce flames under the wall hood
or island hood.
Take carewhen using cleaning
agents or detergents.
Dimensions in parentheses are in
millimeters unless otherwise specified.
For general ventilating use only.
Do not use to exhaust hazardous
or explosive materials and vapors.

8
PRO LOW-PROFILE WALL HOODS
22" (559) deep wall ventilation hood
available in 30" (762), 36" (914), 42" (1067)
and 48" (1219) widths
Classic stainless steel finish
Rail option wall hoods (R) come with a
classic stainless steel decorative rail and
stand-offs—optional platinum or brass rail
available to match dual fuel range bezels
Internal, in-line and remote blower options
Heavy-duty, 16-gauge brushed stainless
steel construction
Stainless steel enclosed liner
Continually welded seams, hemmed edges
and sides, and hand-finished craftsmanship
Recessed easy-access controls
Infinite-speed blower control
Heat Sentry feature automatically turns unit
on when heat is sensed and automatically
adjusts blower speed
Halogen lighting with two settings
Removable, dishwasher-safe, restaurant-
grade stainless steel baffle filters
Transition with backdraft damper included
Two and five year residential warranty
(exclusions apply); see warranty at the end
of this guide
WOLF PRO VENTILATION HOOD FEATURES
LOW-PROFILE WALL HOOD
Model PW482210R shown
Low-Profile Wall Hood
Low-Profile Wall Hood
(R) Rail Option
Classic stainless
steel finish
Backdraft damper
Stainless steel
baffle filters
Infinite-speed
blower control
Location of rating
plate
Halogen lighting
Hand-finished
craftsmanship
Recessed easy-
access controls
Decorative rail
(optional)
Welded seams
and hemmed edges

9
WOLF
WARRANTY
Wolf products are
covered by a two
and five year
residential warranty
(exclusions apply).
See warranty
details at the end
of this guide.
PRO 24" (610) DEEP WALL HOODS
24" (610) deep wall ventilation hood
available in 30" (762), 36" (914), 42" (1067),
48" (1219), 54" (1372), 60" (1524) and 66"
(1676) widths
Classic stainless steel finish
Rail option wall hoods (R) come with a
classic stainless steel decorative rail and
stand-offs—optional platinum or brass rail
available to match dual fuel range bezels
Internal, in-line and remote blower options
Heavy-duty, 16-gauge brushed stainless
steel construction
Stainless steel enclosed liner
Continually welded seams, hemmed edges
and sides, and hand-finished craftsmanship
Recessed easy-access controls
Infinite-speed blower control
Heat Sentry feature automatically turns unit
on when heat is sensed and automatically
adjusts blower speed
Halogen lighting with two settings
Removable, dishwasher-safe, restaurant-
grade stainless steel baffle filters and
grease cups
Transition with backdraft damper included
Two and five year residential warranty
(exclusions apply); see warranty at the end
of this guide
24" (610) DEEP WALL HOOD
Model PW482418R shown
WOLF PRO VENTILATION HOOD FEATURES
Dimensions in parentheses are in
millimeters unless otherwise specified.
24" (610) Wall Hood
24" (610) Wall Hood
(R) Rail Option
Classic stainless
steel finish
Backdraft damper
Stainless steel
baffle filters
Infinite-speed
blower control
Halogen lighting
Hand-finished
craftsmanship
Recessed easy-
access controls
Decorative rail
(optional)
Location of rating
plate
Welded seams
and hemmed edges

10
PRO 27" (686) DEEP WALL HOODS
27" (686) deep wall ventilation hood
available in 30" (762), 36" (914), 42" (1067),
48" (1219), 54" (1372), 60" (1524) and 66"
(1676) widths
Classic stainless steel finish
Rail option wall hoods (R) come with a
classic stainless steel decorative rail and
stand-offs—optional platinum or brass rail
available to match dual fuel range bezels
Internal, in-line and remote blower options
Heavy-duty, 16-gauge brushed stainless
steel construction
Stainless steel enclosed liner
Continually welded seams, hemmed edges
and sides, and hand-finished craftsmanship
Recessed easy-access controls
Infinite-speed blower control
Heat Sentry feature automatically turns unit
onwhen heat is sensed and automatically
adjusts blower speed
Halogen lighting with two settings
Heat lamps—two R40 250-watt maximum
bulbs required (bulbs not included)
Removable, dishwasher-safe, restaurant-
grade stainless steel baffle filters and
grease cups
Transition with backdraft damper included
Two and five year residential warranty
(exclusions apply); see warranty at the end
of this guide
WOLF PRO VENTILATION HOOD FEATURES
27" (686) DEEP WALL HOOD
Model PW482718R shown
27" (686) Wall Hood
27" (686) Wall Hood
(R) Rail Option
Classic stainless
steel finish
Backdraft damper
Stainless steel
baffle filters
Infinite-speed
blower control
Location of rating
plate
Halogen lighting
Hand-finished
craftsmanship
Recessed easy-
access controls
Decorative rail
(optional)
Heat lamps
Welded seams
and hemmed edges