Wolf WWD30 User manual

Model WWD30
Warming Drawer
The superior air control of the Wolf
warming drawer helps keep moist foods
moist and crisp foods crisp. Model
WWD30 can be used in combination with
a Wolf built-in oven and/or microwave.
Stainless steel drawer fronts match the
look of our L Series and E Series ovens
and the integrated drawer front allows for
a custom wood panel. Electronic controls
are hidden so the unit integrates with
surrounding cabinetry.
Features
L Series stainless steel drawer front with
handle available in classic, platinum and
carbon finishes
E Series stainless steel drawer front with
handle available in classic finish
Integrated drawer front allows for custom
wood panel application
850-watt heating element
Hidden electronic touch control panel
Preset and variable temperature control
Preset automatic shut-off or extended
operation in Sabbath Mode
Stainless steel interior
Rack for stacking food
Removable stainless steel drawer pan
Full-extension, ball bearing drawer glides
Approved for outdoor installations
Drawer Front Finishes
L Series stainless steel drawer front available
in three finishes—E Series in classic only.
Accessories
Tubular handle for integrated drawer front in
classic, platinum or carbon stainless steel
Classic stainless steel handle for integrated
drawer front to match E Series ovens
Six-piece container set—includes six
stainless steel pans with lids: one
6.7-quart pan, one 4.1-quart pan, two
3-quart pans, two 1.8-quart pans and
pan rack
Accessories are available through your Wolf
dealer. To obtain local dealer information, visit the
Showroom Locator section of our website,
wolfappliance.com.
Classic CarbonPlatinum
30" L Series Drawer Front WWDFRONT/S WWDFRONT/P WWDFRONT/B
Stainless Steel Finish Classic Platinum Carbon
Integrated Drawer Front WWDFRONT/I
Accepts Wood Panel
Model WWD30 is sold as a base unit only. A drawer front panel is required. Panels are available through
your Wolf dealer. Stainless steel drawer front panels include a handle to match L Series or E Series built-in
ovens. Integrated drawer front allows for a custom wood panel and handle hardware.
30" E Series Drawer Front WWDFRONT-2F/S WWDFRONT-2U/S
Stainless Steel Finish Framed/Classic Unframed/Classic
Accessory Container Set
This appliance is certified by Star-K to
meet strict religious regulations in
conjunction with specific instructions
found on www.star-k.org.
L Series Drawer Front
(carbon stainless shown)
E Series Drawer Front
Integrated Drawer Front
Model WWD30 shown with L Series classic stainless steel drawer front.

Installation Notes
Installation with L Series drawer front
shown—specifications for E Series and inte-
grated drawer fronts will vary.
Model WWD30 is sold as a base unit only. It
must be installed with an accessory drawer
front. Specifications will vary with each
drawer front. Refer to installation instructions
provided with the drawer front. Complete
installation specifications can be found on
our website, wolfappliance.com.
Unit dimensions may vary by ±
1
/ 8 ".
Specifications
Model WWD30 with L Series Drawer Front
Overall Width 297/8"
Overall Height 101/4"
Overall Depth (including handle) 271/8"
Model WWD30 with E Series Drawer Front
Overall Width 297/8"
Overall Height 101/4"
Overall Depth (including handle) 26"
Model WWD30 with Integrated Drawer Front
Overall Width 293/8"
Overall Height 101/8"
Overall Depth (behind frame) 231/2"
Integrated Panel Dimensions (min)
Overlay 30" W x 103/8" H
Inset 293/8" W x 101/8" H
Integrated Panel Thickness (min) 5/8"
Integrated Panel Weight (max) 25 lbs
Heating Element 850 W
Electrical Requirements 120 V AC, 60 Hz
15 or 20 amp circuit
Power Cord 3' cord with grounded plug
Shipping Weight 100 lbs
Installation Specifications
Installation with L Series drawer front
Overall Dimensions
Model WWD30
Warming Drawer
Dimensions in parentheses are in
millimeters unless otherwise specified.
23
1
/ 2 " (597)
BEHIND FRAME
29
7
/ 8 " (759)
OVERALL WIDTH
9"
(229)
27
1
/ 8 " (689)
OVERALL DEPTH
10
1
/ 4 "
(260)
231/2" (597)
BEHIND FRAME
297/8" (759)
OVERALL WIDTH
9"
(229)
26" (660)
OVERALL DEPTH
101/4"
(260)
Model WWD30 with integrated drawer front
Model WWD30 with L Series drawer front
Model WWD30 with E Series drawer front
293/8" (746)
OVERALL WIDTH
231/2" (597)
BEHIND FRAME
9"
(229)
101/8"
(257)
28
1
/ 2 " (724)
33" (838)
RECOMMENDED CABINET WIDTH
30" min (762)
28
5
/ 8 " (727)
WARMING DRAWER
OPENING WIDTH
E
5"
(127)
4"
(102)
ALLOW FOR
5
/ 8 " (16)
OVERLAP OF
DRAWER FACE
ON ALL SIDES
NOTE: Refer to the 30"(762) L Series built-in oven specifications for electrical location.
30-INCH OVEN
ROUGH OPENING
24" min (610)
CABINET DEPTH
2
3
/ 8 "
(60)
ANTI-TIP BLOCK APPLICATION
9
1
/ 8 " (232)
OPENING
HEIGHT
23
7
/ 8 " min (606)
OPENING DEPTH
27
3
/ 16 "
(691)
24" min
(610)
2" (51) x 2" (51)
ANTI-TIP BLOCK
PLATFORM APPLICATION
24" min (610)
CABINET DEPTH
7
/ 8 "
(22)
9
1
/ 8 " (232)
OPENING
HEIGHT
23
7
/ 8 " min (606)
OPENING DEPTH
27
3
/ 16 "
(691)
24" min
(610)
7
/ 8 " (22)
PLATFORM
28
5
/ 8 " (727)
OPENING WIDTH
E
5"
(127)
4"
(102)
33" (838)
RECOMMENDED CABINET WIDTH
30" min (762)
36" (914)
STANDARD
FLOOR TO
COUNTER
HEIGHT
5" min (127)
BOTTOM
OF OPENING
TO FLOOR
24" min (610)
CABINET DEPTH
9
1
/ 8 " (232)
OPENING
HEIGHT
23
7
/ 8 " min (606)
OPENING DEPTH
2" (51) x 2" (51)
ANTI-TIP BLOCK
DIMENSION
WILL VARY*
ALLOW FOR
5
/ 8 " (16)
OVERLAP OF
DRAWER FACE
ON ALL SIDES
*Allow enough room for placement of anti-tip block and drawer face overlap.