WolfPack HDTVVRP0101 User manual

HDTVVRP0101
VGA UTP Extender 1X1 Splitter with
Audio
Dear Customer
Thank you for purchasing this product. For optimum performance
and safety,
please read these instructions carefully before connecting,
operating or adjusting
this product. Please keep this manual for future reference.
1.0 Introduction
This VGA UTP Extender 1X1 Splitter with Audio is an ideal device
for local
displaying and remote viewing. It combines split function and
extension function. It
distributes the input of the VGA signal and audio signal into the
local and remote
outputs simultaneously. Receiver by Cat5 x1 works with the
Sender as a full
functional module by receiving the distributed signal from the
sender and
transmitting to display. Only by the most inexpensive UTP cable
with cross stand
inside, the full functional module extend the VGA display max up
to 300 meters.
It offers solutions for VGA retail and show site and Projector
factory, noise, space
and security concerns, data center control, information
distribution, conference
room presentation, school and corporate training environments.
1.1 FEATURES
This device has many features that enable it to perform in a
superior manner.
Among those features you will find:
z Extend VGA video and stereo audio signal max up to 300m over

one UTP
cable with cross stand inside
z Adjusting GAIN and PEAK to adapt for the different length of
UTP cable.
GAIN: Brightness adjustment.
PEAK: Skew adjustment.
z Supports resolution max up to 1920x1200.
z Dual output at local unit: 1 x VGA output for local site, plus 1 x
UTP output for
remote site.
z Work with monitors projectors, HDTV, and flat panels.
2.0 SPECIFICATIONS
Input /Output Connector
Input connector VGA(Female 15pin), Stereo Audio
Output connector VGA(Female 15pin),
Stereo Audio,1xRJ45
Operating Frequency
Vertical Frequency Range 60/75/85Hz
Resolutions(PC)
640X480
800X600
1024X768
1280X720
1280X768
1280X960
1280X1024
1600X900
1600X1200
1920X1080
1920X1200
Mechanical
Size of VGA UTP Extender 1X1
100×65×25.5mm
Splitter
Weight of VGA UTP Extender 1X1 208g
Splitter

Size of Receiver (L-W-H)
81.5×43×23MM
Weight of Receiver (Net) 108g
Warranty
Limited Warranty 1 Year Parts and Labor
Environmental
Operating Temperature
0℃to +70℃
Operating Humidity 10% to 85 % RH (no condensation)
Storage Temperature
-10℃to +80℃
Storage Humidity 5% to 90 % RH (no condensation)
Power Requirement
Power Supply for VGA UTP Extender 5V@2A, max 5W
1X1 Splitter
Power Supply for Receiver 5V@2A, max 5W
Regulatory Approvals
Converter Unit FCC,CE,UL
Power Supply UL,CE,FCC
Accessories Adapter
AC Power Adapter US standard, UK standard and so on
User Manual English Version
Note: Specifications are subject to change without notice.
3.0 PACKAGE CONTENTS
Before attempting to use this unit, please check the packaging
and make sure the
following items are contained in the shipping carton:
1) VGA UTP Extender 1X1 Splitter
3) One Receiver
4) Two pieces of 5V@2A DC Power Supply.
5.0 CONNECTION AND OPERATION
1) Connect the single VGA source to the main VGA input using a

piece of VGA
cable.
2) Connect VGA output of the Sender to a local display and Audio
output of the
Sender to a local Sounder
3) Connect Sender and each Receiver using a piece of each pieces
of CAT-5e/6
4) Connect VGA outputs of Receivers to remote displays and
Audio output of
Receivers to remote sounders.
5) Plug one 5V@ 2A power supply into the VGA UTP 1X1Splitter
and the others
5V@2A power suppliers to Receiver.
Attention: Insert / Extract cable gently