Wood Stone FIRE DECK 9690 User manual

Toll Free 800.988.8103
Tel [phone]
Fax [phone]
www.woodstone-corp.com
WOOD STONE CORPORATION
1801 W. Bakerview Rd.
Bellingham, WA 98226 USA
FIRE DECK SERIES
Stone Hearth Oven
Gas-Fired, Gas/Wood Combination Models
FIRE DECK 9690 WS-FD-9690
FIRE DECK 11275 WS-FD-11275
FIRE DECK 11290 WS-FD-11290
FIRE DECK 90-112 WS-CS-90-112
DOC NO M0041.09 REVISED OCTOBER 2017
Installation and
Operation Manual

FD-9690, 11275, 11290 and CS-90-112
Installation and Operation Manual
PG 2 OF 32
M0041.09 OCTOBER 2017
An ongoing program of product improvement may
require us to change specifications without notice.
WOOD STONE CORPORATION
1801 W. Bakerview Rd.
Bellingham, WA 98226 USA
TOLL FREE 800.988.8103
TEL [phone]
FAX [phone]
E-MAIL [e-mail]
woodstone-corp.com
TABLE OF CONTENTS
TABLE OF CONTENTS
Fire Deck Series � � � � � � � � � � � � � 3
Cautions & Warnings � � � � � � � � � � 4
FD-9690 Specifications� � � � � � � � � 5
FD-11275 Specifications � � � � � � � � 6
FD-11290 Specifications � � � � � � � � 7
CS-90-112 Specifications � � � � � � � 8
Unloading & Moving � � � � � � � � � � � 9
Caster Removal� � � � � � � � � � � � � 10
Toe Kick Installation � � � � � � � � � � 11
Installation Clearances � � � � � � � � 12
Clearances� � � � � � � � � � � � � � � � 13
Venting � � � � � � � � � � � � � � � � � � 14
Hood Specifications � � � � � � � � � � 16
Gas Specifications � � � � � � � � � � � 18
Electrical Connection � � � � � � � � � 20
Controller � � � � � � � � � � � � � � � � 21
Initial Start-Up� � � � � � � � � � � � � � 22
Daily Oven Operation � � � � � � � � � 23
Flame Height Control � � � � � � � � � 24
Use of Wood in the Oven � � � � � � � 25
Maintenance & Thermal Cleaning� � 26
Troubleshooting Guide� � � � � � � � � 27
Fuelwood Facts� � � � � � � � � � � � � 28
Decorative Flame Burner � � � � � � � 29
Electrical Diagrams � � � � � � � � � � 30
Interlock Diagram � � � � � � � � � � � 31
Limited Warranty � � � � � � � � � � � � 32

FD-9690, 11275, 11290 and CS-90-112
Installation and Operation Manual
PG 3 OF 32
M0041.09 OCTOBER 2017
An ongoing program of product improvement may
require us to change specifications without notice.
WOOD STONE CORPORATION
1801 W. Bakerview Rd.
Bellingham, WA 98226 USA
TOLL FREE 800.988.8103
TEL [phone]
FAX [phone]
E-MAIL [e-mail]
woodstone-corp.com
FIRE DECK SERIES
INSTALLATION AND OPERATION MANUAL FOR THE
WOOD STONE FIRE DECK
STONE HEARTH COOKING EQUIPMENT
WS-FD-9690-(RFG)-IR-(W),
WS-FD-11275-(RFG)-IR-(W),
WS-FD-11290-(RFG)-IR-(W) AND
WS-CS-90-112-(RFG)-IR-(W) (BAGEL OVEN) MODELS
GAS-FIRED / WOOD-FIRED MODELS
ADDITIONAL COPIES AVAILABLE UPON REQUEST
IF THIS OVEN IS NOT PROPERLY INSTALLED A FIRE MAY RESULT. TO REDUCE THE RISK OF FIRE, FOLLOW THESE
INSTALLATION INSTRUCTIONS. A MAJOR CAUSE OF OVEN RELATED FIRES IS FAILURE TO MAINTAIN REQUIRED
CLEARANCES (AIR SPACES) TO COMBUSTIBLE MATERIALS. IT IS OF THE UTMOST IMPORTANCE THAT THIS
OVEN BE INSTALLED ONLY IN ACCORDANCE WITH THESE INSTRUCTIONS.
Shown: WS-FD-9690-RFG-RR-IR

FD-9690, 11275, 11290 and CS-90-112
Installation and Operation Manual
PG 4 OF 32
M0041.09 OCTOBER 2017
An ongoing program of product improvement may
require us to change specifications without notice.
WOOD STONE CORPORATION
1801 W. Bakerview Rd.
Bellingham, WA 98226 USA
TOLL FREE 800.988.8103
TEL [phone]
FAX [phone]
E-MAIL [e-mail]
woodstone-corp.com
CAUTIONS & WARNINGS
WOOD STONE WS-FD-9690, WS-FD-11290, WS-FD-11275 AND WS-CS-90-112
FIRE DECK INSTALLATION AND OPERATING INSTRUCTIONS
DO NOT THROW THIS MANUAL AWAY
Please read this entire manual before you install the oven. Failure to follow instructions may result in property
damage, bodily injury or even death. Contact your local building or fire officials about restrictions and installation
inspection in your area.
It is recommended that this oven be installed, maintained and serviced by authorized professionals.
IMPORTANT: Consult your local gas supplier for a statement outlining a procedure to be followed in the
event you smell gas. Post the statement in a prominent location.
This product must be installed by a licensed plumber or gas fitter when installed within the Commonwealth
of Massachusetts.
Wood Stone’s Fire Deck Gas-Fired ovens have been tested and approved by Intertek Testing
Services, and are ETL Listed to ANSI Z83.11:2016 Ed. 4, CSA 1.8:2016 Ed. 4, UL Subject 2162,
ULC-S627-00, UL 737, and to NSF/ANSI 4:2016.
RETAIN THIS MANUAL FOR FUTURE REFERENCE
Additional copies of this manual at woodstone-corp�com�
For prompt responses to service/maintenance questions, call us at @ 1-800-988-8103�
ANSI Z83.11:2016 Ed.4
CSA 1.8:2016 Ed.4
ANSI/NSF STD 4
WARNING: Improper installation, adjustment, alteration, service or maintenance can cause property damage,
injury or death. Read the installation, operation and maintenance instructions thoroughly before installing or
servicing this equipment.
AVERTISSEMENT: L’installation, le réglage, la modification, la réparation ou l’entretien incorrect de cet
appareil peut causer des dommages matériels, des blessures ou la mort. Lire attentivement les instructions
d’installation, de fonctionnement et d’entretien avant de procéder à son installation ou entretien.
FOR YOUR SAFETY: Do not store or use gasoline or other flammable vapors or liquids in the vicinity of this or
any other appliance.
ESURE DE SÉCURITÉ: Ne pas entreposer ni utiliser de’essence ni autres vapeurs ou liquides inflammables à
proximté de cet appareil ou de tout autre appareil.
Always keep the area under and around this appliance free and clear of any and all combustible materials.

FD-9690, 11275, 11290 and CS-90-112
Installation and Operation Manual
PG 5 OF 32
M0041.09 OCTOBER 2017
An ongoing program of product improvement may
require us to change specifications without notice.
WOOD STONE CORPORATION
1801 W. Bakerview Rd.
Bellingham, WA 98226 USA
TOLL FREE 800.988.8103
TEL [phone]
FAX [phone]
E-MAIL [e-mail]
woodstone-corp.com
FD-9690 SPECIFICATIONS
Electrical
120 VAC, 4 A, 50/60 Hz
240 VAC, 2 A, 50/60 Hz
All utility connections made underneath
the oven� Shown: Right side burner
configuration� Left side configuration
mirrors right side configuration�
Refer to data plate when installing�
Plan view
Front view Side view
UTILITIES SPECIFICATIONS
Gas
1 inch FNPT gas inlet
347,000 BTU/hr Natural Gas (NG)
or 369,000 BTU/hr Propane (LP)
Optional Decorative Flame
Adds 15,000 BTU/hr
Maximum gas inlet pressure:
1/2 psi (14 inches W�C�)
Venting
The Fire Deck 9690 can be direct connected to a power-ventilated, grease-
rated chimney or can be vented with a Listed Type 1 exhaust hood, or one
constructed in accordance with NFPA 96 and all relevant local and national
codes� The oven must be vented in accordance with all relevant local
and national codes, and in a manner acceptable to the authority having
jurisdiction�
IMPORTANT: Ovens with model numbers containing a -W must be vented
as a solid fuel appliance�
VERY IMPORTANT!!
Oven is shipped with casters�
Height with casters to the top
of the flue collar is 87 ¾"�
Once the oven is in place, the
casters must be removed�
Utility connections are made
underneath the oven� Shown:
Right side burner configuration�
Left side configuration mirrors
right side configuration�
Shipping weight:
10,000 lbs.
Air intake: Do not
facade or cover over
Must be left
removable for service
REV:
LEGEND:
PART #:
001-5090690-Gas-R
9690 Fire Deck - Gas Right
General Arrangement
10/11/2013 bena
1
DWN BY:
SHEET:
Bellingham, WA 360/650-1111 www.woodstone-corp.com
DIMENSIONS ARE ININCHES
TOLERANCES: LINEAR ±1/2 [±10mm], ANGULAR ±2°
UNLESS NOTED OTHERWISE
\\woodstone.net\dfs\CAD\0 Pn\WS Top Level\FD-9690_General_Arrangement-1.dft
THE INFORMATION CONTAINED IN THIS DRAWING IS THE
SOLE PROPERTY OF WOOD STONE CORPORATION
ANY REPRODUCTION OR USE IN PART OR AS A WHOLE
WITHOUT THE WRITTEN PERMISSION OF WOOD STONE IS
PROHIBITED
AN ONGOING PROGRAM OF PRODUCTIMPROVEMENT
MAY REQUIRE US TO CHANGE SPECIFICATIONS
WITHOUT NOTICE.
DATE:
G
120VAC, 4A
GAS INLET: 1" NPT
347,000 BTU, NG
369,000 BTU, LP
1 of 1
AIR INTAKE
AIR INTAKE
G
G
87 1/4"
2210mm
96 1/4"
2450mm
59 3/4"
1520mm
9 3/4"
250mm
9 1/2"
240mm 36 1/2"
930mm 92"
2340mm
2"
50mm
84"
2140mm
33"
840mm
85 3/4"
2180mm
49 3/4"
1260mm
18"
460mm
48 1/4"
1220mm
32"
810mm
97 1/2"
2480m
m
7 1/2"
190mm
62 1/4"
1580mm
8 1/4"
210mm
12"
300mm OD
27"
690mm
20"
510mm
20"
510mm
5 1/2"
140mm
20 3/4"
530mm
15"
380mm
4"
100mm
REV:
LEGEND:
PART #:
001-5090690-Gas-R
9690 Fire Deck - Gas Right
General Arrangement
10/11/2013 bena
1
DWN BY:
SHEET:
Bellingham, WA 360/650-1111 www.woodstone-corp.com
DIMENSIONS ARE ININCHES
TOLERANCES: LINEAR ±1/2 [±10mm], ANGULAR ±2°
UNLESS NOTED OTHERWISE
\\woodstone.net\dfs\CAD\0 Pn\WS Top Level\FD-9690_General_Arrangement-1.dft
THE INFORMATION CONTAINED IN THIS DRAWING IS THE
SOLE PROPERTY OF WOOD STONE CORPORATION
ANY REPRODUCTION OR USE IN PART OR AS A WHOLE
WITHOUT THE WRITTEN PERMISSION OF WOOD STONE IS
PROHIBITED
AN ONGOING PROGRAM OF PRODUCTIMPROVEMENT
MAY REQUIRE US TO CHANGE SPECIFICATIONS
WITHOUT NOTICE.
DATE:
G
120VAC, 4A
GAS INLET: 1" NPT
347,000 BTU, NG
369,000 BTU, LP
1 of 1
AIR INTAKE
AIR INTAKE
G
G
87 1/4"
2210mm
96 1/4"
2450mm
59 3/4"
1520mm
9 3/4"
250mm
9 1/2"
240mm 36 1/2"
930mm 92"
2340mm
2"
50mm
84"
2140mm
33"
840mm
85 3/4"
2180mm
49 3/4"
1260mm
18"
460mm
48 1/4"
1220mm
32"
810mm
97 1/2"
2480mm
7 1/2"
190mm
62 1/4"
1580mm
8 1/4"
210mm
12"
300mm OD
27"
690mm
20"
510mm
20"
510mm
5 1/2"
140mm
20 3/4"
530mm
15"
380mm
4"
100mm
REV:
LEGEND:
PART #:
001-5090690-Gas-R
9690 Fire Deck - Gas Right
General Arrangement
10/11/2013 bena
1
DWN BY:
SHEET:
Bellingham, WA 360/650-1111 www.woodstone-corp.com
DIMENSIONS ARE ININCHES
TOLERANCES: LINEAR ±1/2 [±10mm], ANGULAR ±2°
UNLESS NOTED OTHERWISE
\\woodstone.net\dfs\CAD\0 Pn\WS Top Level\FD-9690_General_Arrangement-1.dft
THE INFORMATION CONTAINED IN THIS DRAWING IS THE
SOLE PROPERTY OF WOOD STONE CORPORATION
ANY REPRODUCTION OR USE IN PART OR AS A WHOLE
WITHOUT THE WRITTEN PERMISSION OF WOOD STONE IS
PROHIBITED
AN ONGOING PROGRAM OF PRODUCTIMPROVEMENT
MAY REQUIRE US TO CHANGE SPECIFICATIONS
WITHOUT NOTICE.
DATE:
G
120VAC, 4A
GAS INLET: 1" NPT
347,000 BTU, NG
369,000 BTU, LP
1 of 1
AIR INTAKE
AIR INTAKE
G
G
87 1/4"
2210mm
96 1/4"
2450mm
59 3/4"
1520mm
9 3/4"
250mm
9 1/2"
240mm 36 1/2"
930mm 92"
2340mm
2"
50mm
84"
2140mm
33"
840mm
85 3/4"
2180mm
49 3/4"
1260mm
18"
460mm
48 1/4"
1220mm
32"
810mm
97 1/2"
2480mm
7 1/2"
190mm
62 1/4"
1580mm
8 1/4"
210mm
12"
300mm OD
27"
690mm
20"
510mm
20"
510mm
5 1/2"
140mm
20 3/4"
530mm
15"
380mm
4"
100mm

FD-9690, 11275, 11290 and CS-90-112
Installation and Operation Manual
PG 6 OF 32
M0041.09 OCTOBER 2017
An ongoing program of product improvement may
require us to change specifications without notice.
WOOD STONE CORPORATION
1801 W. Bakerview Rd.
Bellingham, WA 98226 USA
TOLL FREE 800.988.8103
TEL [phone]
FAX [phone]
E-MAIL [e-mail]
woodstone-corp.com
FD-11275 SPECIFICATIONS
Plan view
Front view Side view
Shipping weight:
10,000 lbs.
Air intake: Do not
facade or cover over
Must be left
removable for service
UTILITIES SPECIFICATIONS
Gas
1 inch FNPT gas inlet
315,000 BTU/hr Natural Gas (NG)
or 310,000 BTU/hr Propane (LP)
Optional Decorative Flame
Adds 15,000 BTU/hr
Maximum gas inlet pressure:
1/2 psi (14 inches W�C�)
Electrical
120 VAC, 4 A, 50/60 Hz
240 VAC, 2 A, 50/60 Hz
All utility connections made underneath
the oven� Shown: Right side burner
configuration� Left side configuration
mirrors right side configuration�
Refer to data plate when installing�
Venting
The Fire Deck 11275 can be direct connected to a power-ventilated,
grease-rated chimney or can be vented with a Listed Type 1 exhaust hood,
or one constructed in accordance with NFPA 96 and all relevant local and
national codes� The oven must be vented in accordance with all relevant
local and national codes, and in a manner acceptable to the authority
having jurisdiction�
IMPORTANT: Ovens with model numbers containing a -W must be vented
as a solid fuel appliance�
VERY IMPORTANT!
Oven is shipped with casters
which add 1-1/2"� Height with
casters to the top of the flue
collar is 87 ¾"� Once the oven
is in place the casters must be
removed�
Utility connections are made
underneath the oven and
indicated on the Plan View to
illustrate geographic location
only�
Shown: Right side burner
configuration� Left side
configuration mirrors right side
configuration�
REV:
LEGEND:
PART #:
001-5011275
11275 Fire Deck
General Arrangement
10/14/2013 bena
1
DWN BY:
SHEET:
Bellingham, WA 360/650-1111 www.woodstone-corp.com
DIMENSIONS ARE IN INCHES
TOLERANCES: LINEAR ±1/2 [±10mm], ANGULAR ±2°
UNLESS NOTED OTHERWISE
\\woodstone.net\dfs\CAD\0 Pn\WS Top Level\FD-Fire_Deck\FD-11275_General Arrangement-1.dft
THE INFORMATION CONTAINED IN THIS DRAWING IS THE
SOLE PROPERTY OF WOOD STONE CORPORATION
ANY REPRODUCTION OR USE IN PART OR AS A WHOLE
WITHOUT THE WRITTEN PERMISSION OF WOOD STONE IS
PROHIBITED
AN ONGOING PROGRAM OF PRODUCT IMPROVEMENT
MAY REQUIRE US TO CHANGE SPECIFICATIONS
WITHOUT NOTICE.
DATE:
G
120VAC, 4A
GAS INLET: 1" NPT
295,000 BTU, NG
282,500 BTU, LP
1 of 2
AIR INTAKE
AIR INTAKE
G
G
8 1/4"
210mm
62 1/4"
1580mm
82 1/2"
2100mm
7 1/2"
190mm
20"
510mm
27"
690mm
4"
100mm
20"
510mm
12"
300mm OD
87 3/4"
2230mm
1 1/2"
40mm
17 1/2"
440mm
36 3/4"
930mm
74 3/4"
1900mm 108"
2740mm
24"
610mm
9 3/4"
250mm
59 3/4"
1520mm
112 1/4"
2850mm 2 1/4"
50mm
48 1/4"
1230mm
31 3/4"
810mm
18"
460mm 70 3/4"
1800mm
15"
380mm
20 3/4"
530mm
33"
840mm
84"
2130mm
REV:
LEGEND:
PART #:
001-5011275
11275 Fire Deck
General Arrangement
10/14/2013 bena
1
DWN BY:
SHEET:
Bellingham, WA 360/650-1111 www.woodstone-corp.com
DIMENSIONS ARE IN INCHES
TOLERANCES: LINEAR ±1/2 [±10mm], ANGULAR ±2°
UNLESS NOTED OTHERWISE
\\woodstone.net\dfs\CAD\0 Pn\WS Top Level\FD-Fire_Deck\FD-11275_General Arrangement-1.dft
THE INFORMATION CONTAINED IN THIS DRAWING IS THE
SOLE PROPERTY OF WOOD STONE CORPORATION
ANY REPRODUCTION OR USE IN PART OR AS A WHOLE
WITHOUT THE WRITTEN PERMISSION OF WOOD STONE IS
PROHIBITED
AN ONGOING PROGRAM OF PRODUCT IMPROVEMENT
MAY REQUIRE US TO CHANGE SPECIFICATIONS
WITHOUT NOTICE.
DATE:
G
120VAC, 4A
GAS INLET: 1" NPT
295,000 BTU, NG
282,500 BTU, LP
1 of 2
AIR INTAKE
AIR INTAKE
G
G
8 1/4"
210mm
62 1/4"
1580mm
82 1/2"
2100mm
7 1/2"
190mm
20"
510mm
27"
690mm
4"
100mm
20"
510mm
12"
300mm OD
87 3/4"
2230mm
1 1/2"
40mm
17 1/2"
440mm
36 3/4"
930mm
74 3/4"
1900mm 108"
2740mm
24"
610mm
9 3/4"
250mm
59 3/4"
1520mm
112 1/4"
2850mm
2 1/4"
50mm
48 1/4"
1230mm
31 3/4"
810mm
18"
460mm 70 3/4"
1800mm
15"
380mm
20 3/4"
530mm
33"
840mm
84"
2130mm
REV:
LEGEND:
PART #:
001-5011275
11275 Fire Deck
General Arrangement
10/14/2013 bena
1
DWN BY:
SHEET:
Bellingham, WA 360/650-1111 www.woodstone-corp.com
DIMENSIONS ARE IN INCHES
TOLERANCES: LINEAR ±1/2 [±10mm], ANGULAR ±2°
UNLESS NOTED OTHERWISE
\\woodstone.net\dfs\CAD\0 Pn\WS Top Level\FD-Fire_Deck\FD-11275_General Arrangement-1.dft
THE INFORMATION CONTAINED IN THIS DRAWING IS THE
SOLE PROPERTY OF WOOD STONE CORPORATION
ANY REPRODUCTION OR USE IN PART OR AS A WHOLE
WITHOUT THE WRITTEN PERMISSION OF WOOD STONE IS
PROHIBITED
AN ONGOING PROGRAM OF PRODUCT IMPROVEMENT
MAY REQUIRE US TO CHANGE SPECIFICATIONS
WITHOUT NOTICE.
DATE:
G
120VAC, 4A
GAS INLET: 1" NPT
295,000 BTU, NG
282,500 BTU, LP
1 of 2
AIR INTAKE
AIR INTAKE
G
G
8 1/4"
210mm
62 1/4"
1580mm
82 1/2"
2100mm
7 1/2"
190mm
20"
510mm
27"
690mm
4"
100mm
20"
510mm
12"
300mm OD
87 3/4"
2230mm
1 1/2"
40mm
17 1/2"
440mm
36 3/4"
930mm
74 3/4"
1900mm 108"
2740mm
24"
610mm
9 3/4"
250mm
59 3/4"
1520mm
112 1/4"
2850mm
2 1/4"
50mm
48 1/4"
1230mm
31 3/4"
810mm
18"
460mm 70 3/4"
1800mm
15"
380mm
20 3/4"
530mm
33"
840mm
84"
2130mm

FD-9690, 11275, 11290 and CS-90-112
Installation and Operation Manual
PG 7 OF 32
M0041.09 OCTOBER 2017
An ongoing program of product improvement may
require us to change specifications without notice.
WOOD STONE CORPORATION
1801 W. Bakerview Rd.
Bellingham, WA 98226 USA
TOLL FREE 800.988.8103
TEL [phone]
FAX [phone]
E-MAIL [e-mail]
woodstone-corp.com
FD-11290 SPECIFICATIONS
Electrical
120 VAC, 4 A, 50/60 Hz
240 VAC, 2 A, 50/60 Hz
All utility connections made underneath
the oven� Shown: Right side burner
configuration� Left side configuration
mirrors right side configuration�
Refer to data plate when installing�
Plan view
Front view Side view
VERY IMPORTANT!
Oven is shipped with casters
which add 1-1/2"� Height with
casters to the top of the flue
collar is 87 ¾"� Once the oven
is in place the casters must be
removed�
Utility connections are made
underneath the oven and
indicated on the Plan View to
illustrate geographic location
only�
Shown: Right side burner
configuration� Left side
configuration mirrors right side
configuration�
Shipping weight:
11,500 lbs.
Air intake: Do not
facade or cover over
Must be left
removable for service
UTILITIES SPECIFICATIONS
Gas
1 inch FNPT gas inlet
347,000 BTU/hr Natural Gas (NG)
or 369,000 BTU/hr Propane (LP)
Optional Decorative Flame
Adds 15,000 BTU/hr
Maximum gas inlet pressure:
1/2 psi (14 inches W�C�)
Venting
The Fire Deck 11290 can be direct connected to a power-ventilated,
grease-rated chimney or can be vented with a Listed Type 1 exhaust hood,
or one constructed in accordance with NFPA 96 and all relevant local and
national codes� The oven must be vented in accordance with all relevant
local and national codes, and in a manner acceptable to the authority
having jurisdiction�
IMPORTANT: Ovens with model numbers containing a -W must be vented
as a solid fuel appliance�
REV:
LEGEND:
PART #:
001-5011290-Gas-R
11290 Fire Deck - Gas Right
General Arrangement
5/23/2014 bena
1
DWN BY:
SHEET:
Bellingham, WA 360/650-1111 www.woodstone-corp.com
DIMENSIONS ARE IN INCHES
TOLERANCES: LINEAR ±1/2 [±10mm], ANGULAR ±2°
UNLESS NOTED OTHERWISE
\\woodstone.net\dfs\CAD\0 Pn\WS Top Level\FD-Fire_Deck\FD-11290_General Arrangement-1.dft
THE INFORMATION CONTAINED IN THIS DRAWING IS THE
SOLE PROPERTY OF WOOD STONE CORPORATION
ANY REPRODUCTION OR USE IN PART OR AS A WHOLE
WITHOUT THE WRITTEN PERMISSION OF WOOD STONE IS
PROHIBITED
AN ONGOING PROGRAM OF PRODUCT IMPROVEMENT
MAY REQUIRE US TO CHANGE SPECIFICATIONS
WITHOUT NOTICE.
DATE:
G
120VAC, 4A
GAS INLET: 1" NPT
347,000 BTU, NG
369,000 BTU, LP
1 of 1
AIR INTAKE
AIR INTAKE
G
G
87 3/4"
2230mm
9 3/4"
250mm
59 3/4"
1520mm
108"
2740mm
17 1/2"
440mm
36 3/4"
930mm 5 1/2"
140mm
24"
610mm
74 3/4"
1900mm
48 1/4"
1230mm
31 3/4"
810mm
2 1/4"
50mm
84"
2130mm
33"
840mm
18"
460mm 85 3/4"
2180mm
112 1/4"
2850mm
97 1/2"
2480mm
7 1/2"
190mm
62 1/4"
1580mm
8 1/4"
210mm
12"
300mm OD
20"
510mm
4"
100mm
15"
380mm
20 3/4"
530mm
27"
690mm
20"
510mm
1 1/2"
40mm
REV:
LEGEND:
PART #:
001-5011290-Gas-R
11290 Fire Deck - Gas Right
General Arrangement
5/23/2014 bena
1
DWN BY:
SHEET:
Bellingham, WA 360/650-1111 www.woodstone-corp.com
DIMENSIONS ARE IN INCHES
TOLERANCES: LINEAR ±1/2 [±10mm], ANGULAR ±2°
UNLESS NOTED OTHERWISE
\\woodstone.net\dfs\CAD\0 Pn\WS Top Level\FD-Fire_Deck\FD-11290_General Arrangement-1.dft
THE INFORMATION CONTAINED IN THIS DRAWING IS THE
SOLE PROPERTY OF WOOD STONE CORPORATION
ANY REPRODUCTION OR USE IN PART OR AS A WHOLE
WITHOUT THE WRITTEN PERMISSION OF WOOD STONE IS
PROHIBITED
AN ONGOING PROGRAM OF PRODUCT IMPROVEMENT
MAY REQUIRE US TO CHANGE SPECIFICATIONS
WITHOUT NOTICE.
DATE:
G
120VAC, 4A
GAS INLET: 1" NPT
347,000 BTU, NG
369,000 BTU, LP
1 of 1
AIR INTAKE
AIR INTAKE
G
G
87 3/4"
2230mm
9 3/4"
250mm
59 3/4"
1520mm
108"
2740mm
17 1/2"
440mm
36 3/4"
930mm 5 1/2"
140mm
24"
610mm
74 3/4"
1900mm
48 1/4"
1230mm
31 3/4"
810mm
2 1/4"
50mm
84"
2130mm
33"
840mm
18"
460mm 85 3/4"
2180mm
112 1/4"
2850mm
97 1/2"
2480mm
7 1/2"
190mm
62 1/4"
1580mm
8 1/4"
210mm
12"
300mm OD
20"
510mm
4"
100mm
15"
380mm
20 3/4"
530mm
27"
690mm
20"
510mm
1 1/2"
40mm
REV:
LEGEND:
PART #:
001-5011290-Gas-R
11290 Fire Deck - Gas Right
General Arrangement
5/23/2014 bena
1
DWN BY:
SHEET:
Bellingham, WA 360/650-1111 www.woodstone-corp.com
DIMENSIONS ARE IN INCHES
TOLERANCES: LINEAR ±1/2 [±10mm], ANGULAR ±2°
UNLESS NOTED OTHERWISE
\\woodstone.net\dfs\CAD\0 Pn\WS Top Level\FD-Fire_Deck\FD-11290_General Arrangement-1.dft
THE INFORMATION CONTAINED IN THIS DRAWING IS THE
SOLE PROPERTY OF WOOD STONE CORPORATION
ANY REPRODUCTION OR USE IN PART OR AS A WHOLE
WITHOUT THE WRITTEN PERMISSION OF WOOD STONE IS
PROHIBITED
AN ONGOING PROGRAM OF PRODUCT IMPROVEMENT
MAY REQUIRE US TO CHANGE SPECIFICATIONS
WITHOUT NOTICE.
DATE:
G
120VAC, 4A
GAS INLET: 1" NPT
347,000 BTU, NG
369,000 BTU, LP
1 of 1
AIR INTAKE
AIR INTAKE
G
G
87 3/4"
2230mm
9 3/4"
250mm
59 3/4"
1520mm
108"
2740mm
17 1/2"
440mm
36 3/4"
930mm 5 1/2"
140mm
24"
610mm
74 3/4"
1900mm
48 1/4"
1230mm
31 3/4"
810mm
2 1/4"
50mm
84"
2130mm
33"
840mm
18"
460mm 85 3/4"
2180mm
112 1/4"
2850mm
97 1/2"
2480mm
7 1/2"
190mm
62 1/4"
1580mm
8 1/4"
210mm
12"
300mm OD
20"
510mm
4"
100mm
15"
380mm
20 3/4"
530mm
27"
690mm
20"
510mm
1 1/2"
40mm

FD-9690, 11275, 11290 and CS-90-112
Installation and Operation Manual
PG 8 OF 32
M0041.09 OCTOBER 2017
An ongoing program of product improvement may
require us to change specifications without notice.
WOOD STONE CORPORATION
1801 W. Bakerview Rd.
Bellingham, WA 98226 USA
TOLL FREE 800.988.8103
TEL [phone]
FAX [phone]
E-MAIL [e-mail]
woodstone-corp.com
CS-90-112 SPECIFICATIONS
UTILITIES SPECIFICATIONS
Gas
1 inch FNPT gas inlet
244,000 BTU/hr Natural Gas (NG)
Optional Decorative Flame
Adds 15,000 BTU/hr
Maximum gas inlet pressure:
1/2 psi (14 inches W�C�)
Electrical
120 VAC, 4 A, 50/60 Hz
240 VAC, 2 A, 50/60 Hz
All utility connections made
underneath the oven�
Refer to data plate when installing�
Venting
The CS-90-112 can be direct connected to a power-ventilated, grease-
rated chimney or can be vented with a Listed Type 1 exhaust hood, or one
constructed in accordance with NFPA 96 and all relevant local and national
codes� The oven must be vented in accordance with all relevant local
and national codes, and in a manner acceptable to the authority having
jurisdiction�
IMPORTANT: Ovens with model numbers containing a -W must be vented
as a solid fuel appliance�
VERY IMPORTANT!
Oven is shipped with casters
which add 1-1/2"� Height with
casters to the top of the flue
collar is 87 ¾"� Once the oven
is in place the casters must be
removed�
Utility connections are made
underneath the oven and
indicated on the Plan View to
illustrate geographic location
only�
Shown: Right side burner
configuration� Left side
configuration mirrors right side
configuration�
REV:
LEGEND:
PART #:
WS-FD-5090112-Gas-R
90112 Fire Deck - Gas Right
General Arrangement
8/27/2013 bena
3
DWN BY:
SHEET:
Bellingham, WA 360/650-1111 www.woodstone-corp.com
DIMENSIONS ARE IN INCHES
TOLERANCES: LINEAR ±1/2 [±10mm], ANGULAR ±2°
UNLESS NOTED OTHERWISE
\\woodstone.net\dfs\CAD\0 Pn\WS Top Level\FD-90112_General_Arrangement-3.dft
THE INFORMATION CONTAINED IN THIS DRAWING IS THE
SOLE PROPERTY OF WOOD STONE CORPORATION
ANY REPRODUCTION OR USE IN PART OR AS A WHOLE
WITHOUT THE WRITTEN PERMISSION OF WOOD STONE IS
PROHIBITED
AN ONGOING PROGRAM OF PRODUCT IMPROVEMENT
MAY REQUIRE US TO CHANGE SPECIFICATIONS
WITHOUT NOTICE.
DATE:
G
120VAC, 4A
GAS INLET: 1" NPT
346,000 BTU, NG
298,000 BTU, LP
1 of 1
AIR INTAKE
AIR INTAKE
G
7 1/2"
190mm
58 1/2"
1490mm
8 1/4"
210mm
27"
690mm
20"
510mm
4"
100mm
22 1/2"
570mm
56"
1430mm
87 3/4"
2230mm
1 1/2"
40mm 85 3/4"
2180mm
9 3/4"
250mm
48 1/4"
1230mm
29 3/4"
760mm
108"
2740mm
33"
840mm
84"
2130mm
O
12"
300mm OD
36 3/4"
930mm
17 1/4"
440mm
52 1/2"
1330mm
24"
610mm
2 1/4"
60mm 2 1/4"
60mm
18"
460mm
119 1/2"
3040mm
Side view
Shipping weight:
11,500 lbs.
Air intake: Do not
facade or cover over
Must be left
removable for service
REV:
LEGEND:
PART #:
WS-FD-5090112-Gas-R
90112 Fire Deck - Gas Right
General Arrangement
8/27/2013 bena
3
DWN BY:
SHEET:
Bellingham, WA 360/650-1111 www.woodstone-corp.com
DIMENSIONS ARE IN INCHES
TOLERANCES: LINEAR ±1/2 [±10mm], ANGULAR ±2°
UNLESS NOTED OTHERWISE
\\woodstone.net\dfs\CAD\0 Pn\WS Top Level\FD-90112_General_Arrangement-3.dft
THE INFORMATION CONTAINED IN THIS DRAWING IS THE
SOLE PROPERTY OF WOOD STONE CORPORATION
ANY REPRODUCTION OR USE IN PART OR AS A WHOLE
WITHOUT THE WRITTEN PERMISSION OF WOOD STONE IS
PROHIBITED
AN ONGOING PROGRAM OF PRODUCT IMPROVEMENT
MAY REQUIRE US TO CHANGE SPECIFICATIONS
WITHOUT NOTICE.
DATE:
G
120VAC, 4A
GAS INLET: 1" NPT
346,000 BTU, NG
298,000 BTU, LP
1 of 1
AIR INTAKE
AIR INTAKE
G
7 1/2"
190mm
58 1/2"
1490mm
8 1/4"
210mm
27"
690mm
20"
510mm
4"
100mm
22 1/2"
570mm
56"
1430mm
87 3/4"
2230mm
1 1/2"
40mm 85 3/4"
2180mm
9 3/4"
250mm
48 1/4"
1230mm
29 3/4"
760mm
108"
2740mm
33"
840mm
84"
2130mm
O
12"
300mm OD
36 3/4"
930mm
17 1/4"
440mm
52 1/2"
1330mm
24"
610mm
2 1/4"
60mm 2 1/4"
60mm
18"
460mm
119 1/2"
3040mm
Plan view
Front view
REV:
LEGEND:
PART #:
WS-FD-5090112-Gas-R
90112 Fire Deck - Gas Right
General Arrangement
8/27/2013 bena
3
DWN BY:
SHEET:
Bellingham, WA 360/650-1111 www.woodstone-corp.com
DIMENSIONS ARE IN INCHES
TOLERANCES: LINEAR ±1/2 [±10mm], ANGULAR ±2°
UNLESS NOTED OTHERWISE
\\woodstone.net\dfs\CAD\0 Pn\WS Top Level\FD-90112_General_Arrangement-3.dft
THE INFORMATION CONTAINED IN THIS DRAWING IS THE
SOLE PROPERTY OF WOOD STONE CORPORATION
ANY REPRODUCTION OR USE IN PART OR AS A WHOLE
WITHOUT THE WRITTEN PERMISSION OF WOOD STONE IS
PROHIBITED
AN ONGOING PROGRAM OF PRODUCT IMPROVEMENT
MAY REQUIRE US TO CHANGE SPECIFICATIONS
WITHOUT NOTICE.
DATE:
G
120VAC, 4A
GAS INLET: 1" NPT
346,000 BTU, NG
298,000 BTU, LP
1 of 1
AIR INTAKE
AIR INTAKE
G
7 1/2"
190mm
58 1/2"
1490mm
8 1/4"
210mm
27"
690mm
20"
510mm
4"
100mm
22 1/2"
570mm
56"
1430mm
87 3/4"
2230mm
1 1/2"
40mm 85 3/4"
2180mm
9 3/4"
250mm
48 1/4"
1230mm
29 3/4"
760mm
108"
2740mm
33"
840mm
84"
2130mm
O
12"
300mm OD
36 3/4"
930mm
17 1/4"
440mm
52 1/2"
1330mm
24"
610mm
2 1/4"
60mm 2 1/4"
60mm
18"
460mm
119 1/2"
3040mm

FD-9690, 11275, 11290 and CS-90-112
Installation and Operation Manual
PG 9 OF 32
M0041.09 OCTOBER 2017
An ongoing program of product improvement may
require us to change specifications without notice.
WOOD STONE CORPORATION
1801 W. Bakerview Rd.
Bellingham, WA 98226 USA
TOLL FREE 800.988.8103
TEL [phone]
FAX [phone]
E-MAIL [e-mail]
woodstone-corp.com
UNLOADING & MOVING
DELIVERY NOTE.
The customer will receive an Oven Shipping Notification when the oven leaves the Wood Stone factory� This will include a PRO# and
a trucking company contact number� Wood Stone recommends that you confirm the delivery date/time with the trucking company
before committing to heavy equipment and/or labor� Our goal is a smooth and safe delivery�
USING A FORKLIFT.
Use a forklift with adequate fork lengths and lifting
capacity� When using a forklift, always use the forklift
pockets; lifting the oven any other way may result in
damage� There are fork pockets only at the front and
back of the oven� The oven may also be rolled across
a smooth flat surface on the temporary casters�
WARNING: THE OVEN IS EXTREMELY TOP HEAVY.
DO NOT ATTEMPT TO MOVE THE OVEN WITHOUT THE PROPER EQUIPMENT AND EXPERIENCE. BE SAFE.
ALWAYS USE A FORKLIFT OR CRANE TO LIFT THIS OVEN.
DO NOT ATTEMPT TO USE A LEVER OF ANY TYPE TO RAISE THIS OVEN.
THE OVEN IS EQUIPPED WITH CASTERS AND CAN BE ROLLED ACROSS A SMOOTH, FLAT SURFACE ONLY.
Once the oven is in place, the casters must be removed. See the CASTER REMOVAL section of the manual.
DO NOT DROP THIS OVEN ABRUPTLY.
USING A CRANE.
When craning a Wood Stone oven, use a Spreader Bar with a two-legged sling
rigged on each end� Suitable lifting straps can be run through the fork lift pockets
on the oven� The Spreader Bar should be of a sufficient length to keep the sling
from contacting the oven and oriented as shown in (fig� 1)�
IF YOU ARE PLANNING TO USE A CRANE TO UNLOAD THE OVEN,
SPECIFY A FLATBED TRUCK DELIVERY!
Minimum Required Forklift Capacities
8' FORKS MINIMUM
Model Shipping Weight Lifting from Front or Rear
FD-9690 10,000 lbs 24,000 lbs
FD-11275 9,500 lbs 20,000 lbs
FD-11290 11,500 lbs 26,000 lbs
CS-90-112 11,500 lbs 26,000 lbs
WARNING
fig. 1
NOTE: Remove Oven Mantle
before lifting the
oven with a crane.
Shown: FD-11290
Moving a Wood Stone Fire Deck oven can present challenges to even the most experienced riggers� Make sure to secure the proper
equipment and make safety your first priority� Please don’t hesitate to call the factory for technical support at 1-800-988-8103.

FD-9690, 11275, 11290 and CS-90-112
Installation and Operation Manual
PG 10 OF 32
M0041.09 OCTOBER 2017
An ongoing program of product improvement may
require us to change specifications without notice.
WOOD STONE CORPORATION
1801 W. Bakerview Rd.
Bellingham, WA 98226 USA
TOLL FREE 800.988.8103
TEL [phone]
FAX [phone]
E-MAIL [e-mail]
woodstone-corp.com
CASTER REMOVAL
The oven is shipped with casters which add 1-1/2"� Height with casters to the top of the flue collar is 87-3/4"�
TO MAINTAIN THE OVEN WARRANTY, SHIPPING CASTERS MUST BE REMOVED WHEN THE OVEN IS INSTALLED.
The oven must be installed on a flat level surface� The weight of the oven is carried by the oven stand� If it is necessary to shim
the oven for leveling purposes, it is critical that the shim material be metal, and that the shims are installed in such a way that
the stand is solidly supported� Failure to solidly support the oven stand can result in costly damage to the oven and
will void the warranty.
The floor design and construction must be adequate to handle the weight of the oven�
Please see woodstone-corp.com/resources/downloads/loads-footprints for floor loading information�
IMPORTANT: DO NOT JACK THE FRAME ANY HIGHER THAN THE MINIMUM NECESSARY TO REMOVE THE CASTER.
1Position a scissor jack
under the oven frame
near the caster to be
removed�
Use the jack to raise
the caster so that it
clears the floor slightly
(1/4" should be
sufficient)�
2 Remove the nuts and
bolts retaining the caster
to the oven frame�
3Rotate the caster in the
direction of the fork
legs to remove from
oven�
Lower the jack and
proceed to the next
caster and repeat
procedure�
1/4"
CASTER REMOVAL