World Market 527216 User manual

24” MARBLE SHELF
SKU - 527216
THANK YOU FOR YOUR PURCHASE. IF YOU HAVE ANY QUESTION PERTAINING
TOASSEMBLY OF THIS PRODUCT, PLEASE CONTACT THE
NEAREST COST PLUS WORLD MARKET STORE. IF YOU ARE NOT NEAR A STORE,
PLEASE CALL OUR CUSTOMER SERVICE CALL CENTER
TOLL FREE AT 877-967-5362 FOR ASSISTACE.

Parts List
Picture DescriptionLabel
A
Page 2
Tool List
Hardware List
H-1
H-2
T-2
T-1
H-3
T-3
Allen Bolt
(L17mm x 6mm)
Screws
(L32mm x 4mm)
Wall Plugs
(L 42mm x 10mm)
Marble shelf
(Drill Bit -10mm)
Allen Key
Screw Driver
Qty
1

Step-1
Assembly Steps
Page 3
H-3
H-3
H-3
T-1
H-3
Leveler
A
Wall
T2
(not included)
A
A
Place marble shelf (A) on a non-marring padded surface. Align bracket end with oval holes over marble
shelf (A) as shown above in the image. Insert allen bolt (H-3) into oval holes and secure with allen key
(T-1). Repeat the process to secure other bracket. Do not over-tighten allen bolts (H-3).
Turn the marble shelf (A) in upright position. Locate the stud on the wall. With the help of two people,
align assembled marble shelf (A) on the wall and mark the location of the holes. Use water leveler to
ensure that marble shelf (A) is in level. Pre-drill holes at the marked locations.

Assembly Steps
Step-2
Assembled view
Page 4
Wall
T-3
(not included)
H-1
Wall
anchor
Wall
anchor
Wall
anchor
Wall
anchor
T-3
(not included)
H-2
A
Insert drywall anchor (H-1) if you are mounting on a dry wall. Align marble shelf (A) over drywall
anchor (H-1) and secure with screws (H-2) as shown above in the drawing.
Product is ready to use.
Note - Shelf is meant to be used with the World Market brackets sold separately.
Maximum load - 50 lbs.