World Market Leona User manual

Leona Farmhouse Ext Dining Table
SKU - 542375
Assembly Instructions
THANK YOU FOR YOUR PURCHASE. IF YOU HAVE ANY QUESTIONS
PERTAINING TO THE ASSEMBLY OF THIS FURNITURE PIECE, PLEASE CONTACT
THE NEAREST COST PLUS WORLD MARKET STORE.
IF YOU ARE NOT NEAR A STORE, PLEASE CALL OUR CUSTOMER SERVICE CALL
CENTER TOLL FREE AT 877-967-5362 FOR ASSISTANCE.
Page 1

Page 2
Component
LABEL
A
B
Table top 1
Extension panel 2
DESCRIPTION QTY
List
Hardware List
Tool List
CLeg
Stretcher 1
2
D
EStretcher 2
1
2
LABEL DESCRIPTION
H-1 Hanger Bolt (Ø8x80mm) 2
H-2
H-3
Nut (M8x7mm)
D Washer (29x15x8mm)
2
2
H-4 10
H-5
Long Bolt (M8x90mm)
Short Bolt (M8x60mm) 2
QTY
T-2 1
Ball Allen Key (M4x30x110mm)
T-1 1
Spanner (M13mm)
LABEL DESCRIPTION QTY
Spring Washer (Ø8xØ14x2mm)
H-6
H-7
14
12
Flat Washer (Ø8xØ20x2mm)

Page 3
Assembly Preparation
Before Beginning:
B
C
A
D
E
Read instructions, cover to cover.
Have 2 adults on hand for assembly.
Save all packaging until
Assemble on a clean non-marring surface (packing foam).
Do not assemble on ooring or carpet.
In case of missing parts contact your nearest Cost Plus World Market store or our
customer service call center 877-967-5362.
Unpack all hardware bags and components to ensure you have all parts.

Page 4
Assembly Steps
Step 1
A
C C
D
E
1. Assemble Stretcher 2 with Table top. Position Table top (A) up side down on non
marring padded surface. Secure the Stretcher 2 (E) using Long bolt (H-4), Spring washer
(H-6) and Flat washer (H-7) onto the underside of Table top (A).
2. Assemble Stretcher 1 with Stretcher 2. Secure the Stretcher 1 (D) using Short bolt (H-5),
Spring washer (H-6) and Flat washer (H-7) onto the underside of Stretcher 2 as shown
in the picture below.
Do NOT tighten any hardware yet.
T-2
H-4
H-6
H-7
Step 2
2x
T-2
H-5
H-6
H-7
2x
1x
Connect Cap Bolt (H-1) with the Leg (C) as shown in the picture below.
H-1

Page 5
Assembly Steps
Step 3
Step 4
Attach the Legs (C) to Table top (A) and Stretcher 1 (D). Secure Nut (H-2), D Washer
(H-3), Spring Washer (H-6) with the Spanner (T-1) as shown in the picture below.
Do NOT tighten any hardware yet.
A
C
D
D
A
T-2
H-4
H-6
H-7
C
A
8x
1. Assemble Legs to Table Top. Secure Legs (C) to Table top (A) as shown with
Long bolt (H-4), Spring washer (H-6) and Flat washer (H-7).
2.Tighten all bolts with Ball allen key (T-2) once ALL hardware is engaged.
T-1
H-2 H-6 H-3 H-1
2x

Page 6
Assembly Steps
Step 5
4x
8x
Insert extension panel as shown below.
Turn table right side up
Open the latches on the ends of the table
then pull the end rail out as shown.
After extension panel is inserted
close and turn latches to lock in place.
Notice:
Do not lift table by the end
caps with or without the
extension leaves in place
Step 6
CLOSE
OPEN
Adjust levelers if
needed for stability.
A
A
B

Care & Maintenance
• Do not put hot items direct ly on furniture surface.
• Do not clean furniture with harsh cleansers or polish.
• Do not place furniture in direct sunlight.
• Do not place furniture near
• Do not write on furniture without a padded barrier to protect the surface.
• Do not place furniture outside. For indoor use only.
• Dust and pick-up spills using a clean, non-colored, lint-free cloth.
• Stains may be removed with mild soap solution and damp cloth.
• Not for commercial use. For residential use only.
Page 7
heating or cooling vents.