World Market LANA 622498 User manual

SKU–622498
THANK YOU FOR YOUR PURCHASE. IF YOU HAVE ANY QUESTIONS
PERTAINING TO THE ASSEMBLY OF THIS FURNITURE PIECE, PLEASE CONTACT
THE NEAREST WORLD MARKET STORE.
IF YOU ARE NOT NEAR A STORE, PLEASE CALL OUR CUSTOMER SERVICE CALL
CENTER TOLL FREE AT 877- 967-5362 FOR ASSISTANCE.
ALL PRODUCTS SOLD AT WORLD MARKET ARE NOT FOR COMMERCIAL
USE AND ARE INTENDED FOR RESIDENTIAL USE ONLY
Page 1
Assembly Instructions
2023.02.16
LANA A-FRAMEDININGCHAIR

LABEL
Page 2
Component List
DESCRIPTION QTY
AChair Back
B
1
Chair Seat1
Hardware List
Wood Plug
H-2
4
8
4
LABEL
H-1
DESCRIPTION QTY
Tool List
H-3
Short Allen Bolt
M6x40mm
Left leg
C1
DRight leg 1
Long Allen Bolt
M6x50mm
L
ABEL DESCRIPTION QTY
T-1 Allen Key 1

Assembly Preparation
Before Beginning: A
•Unpack all hardware bags and components to ensure you have allparts-
•Read instructions, cover to cover-
•Have 2 adults on hand for assembly-
•Do not assemble on flooring or carpet-
•Assemble on a clean non-marring surface (packing foam)-
•Save allpackaging until finished-
•In case of missing parts, please contact your nearest World Market store or
call our customer servicecallcenter at call 1-877-967-5362.
Page 3
(H-1) Short Allen Bolt x 4
B
CD
(H-2) Long Allen Bolt x 8(H-3) Wood Plug x 4
.
..
.
•WARNING: Small parts are a choking hazard. Adult supervision is required before,
during and after assembly.

(H-1)
(T-1)
A
D
D
Assembly Steps
Step 1
Position Chair Back (A) onto Right Leg (D) as shown. Secure connection with Short Allen Bolts (H-1) using the
provided Allen Key (T-1). Tighten connection enough so that it stands on its own, but do not yet fully tighten.
Page 4
(H-2) Long Allen Bolt x 4
(T-1) Allen Key x 1
B
Step 2
(T-1) Allen Key x 1
(H-1) Short Allen Bolt x 2
A
B
B
D
(T-1)
D
(H-2)
Front
Front
(H-2)
PLEASE MAKE NOTE OF THE
DIFFERENT BOLT SIZES AND
ENSURE YOU ARE USING THE
CORRECT SIZE BOLT FOR EACH
STEP.
Place Right Leg (D) down onto a padded, non-marring surface, ensuring the screw holes are facing up. Position
Chair Seat (B) onto Right Leg (D) by inserting the dowels into the predrilled mortises. Make sure the front of the
Chair Seat (B) and the Right Leg (D) are facing the same direction. Loosely secure connections with Long Allen
Bolts (H-2) using the provided Allen Key (T-1). Do not yet fully tighten.

Assembly Steps
Step 3
(H-1) Short Allen Bolt x 2
(T-1) Allen Key x 1
(T-1)
C
(H-2)
(T-1)
(H-1)
(H-2)
C
B
B
D
(H-2) Long Allen Bolt x 4
A
C
A
Front
Position Left Leg (C) onto assembly as shown by inserting the dowels into the predrilled mortises. Loosely
secure the Left Leg (C) with the Chair Seat (B) and the Chair Back (A) following the same instructions as
Steps 1 and 2. It is important to use the correct size bolts for each connection to prevent damage.
Page 5

Assembly Steps
Step 4
Carefully turn chair upright. Fully tighten all hardware fromallprevious steps. Do not over tighten.
Step 5
(H-3) Wood Plug x 4 A
(H-3)
(H-3) C
D
Insert provided Wood Plugs (H-3) into recessed bolt holes in the inner frame of the Chair Back (A).
Assembly is complete and the Chair is ready for use.
Page 6

Care & Maintenance
Page 7
•Do not put hot items directly on furniture surface.
•Do not clean furniture with harsh cleansers or polish.
•Do not place furniture in direct sunlight.
•Do not place furniture near heating or cooling vents.
•Do not write on furniture without a padded barrier to protect the surface.
•Do not place furniture outside. For indoor use only.
•All products sold at World Market are not for commercial
use are intended for residential use only.
•Dust and pick-up spills using a clean, non-colored, lint-free, dry cloth.

Page 8