World Market Pascal 601596 User manual

Assembly Instructions
Pascal Wood Coffee Table
SKU – 601596
THANK YOU FOR YOUR PURCHASE. IF YOU HAVE ANY QUESTIONS
PERTAINING TO THE ASSEMBLY OF THIS FURNITURE PIECE, PLEASE CONTACT
THE NEAREST COST PLUS WORLD MARKET STORE.
IF YOU ARE NOT NEAR A STORE, PLEASE CALL OUR CUSTOMER SERVICE CALL
CENTER TOLL FREE AT 877- 967-5362 FOR ASSISTANCE.
NOT FOR COMMERCIAL USE.
Page 1

Component List
LABEL DESCRIPTION
QTY
A
Top Table
1
B Long Leg 2
C Short Leg 2
Page 2
Hardware List
LABEL DESCRIPTION QTY
H-1
Allen Bolt
M6 x 40mm
12
Tool List
LABEL
DESCRIPTION QTY
T-1
Allen Key
1

Assembly Preparation
Before Beginning:
 Unpack all hardware bags and components to ensure you have all parts-
 Read instructions, cover to cover-
 Have 2 adults on hand for assembly-
 Do not assemble on flooring or carpet-
 Assemble on a clean non-marring surface (packing foam)-
 Save all packaging until finished-
 In case of missing parts, please contact your nearest Cost Plus World Market store or call our
customer service call center at call 1-877-967-5362.
Page 3

Assembly Steps
Step 1
z
z
- Lay the Long Leg (B) and Short Leg (C) on a non-marring surface (packing foam).
- Align holes on the Short Leg (C) with corresponding holes on the Long Leg (B).
- Secure each Leg (B and C) using 4 Allen Bolts (H-1). Repeat the process for the other Leg.
- Engage all bolts by hand first, then fully tighten all Allen Bolts (H-1) with the supplied Allen Key (T-1).
- Using a second person to assist you, carefully turn the leg assembly upright.
Step 2
- Lay the Top Media TV Stand (A) upside down on a non-marring surface (packing foam).
- Lay the Top Table (A) upside down on a non-marring surface (packing foam).
- Align holes on the bracket Leg (B and C) with corresponding holes on the bottom of Top Table (A).
- Secure each Leg (B and C) using 4 Allen Bolts (H-1).
- Engage all bolts by hand first, then fully tighten all Allen Bolts (H-1) with the supplied Allen Key (T-1).
- Using a second person to assist you, carefully turn the table assembly upright.
Page 4
(H
-
1) Allen Bolt x
8
H1
B
T1
C
(H
-
1) Allen Bolt x
4
H1 T1
A
TOP
TOP

Step 3
- Check that all bolts have been fully tightened. Assembly is now complete and the product is ready for use.
- NOTE: Levelers on the bottom of both Legs (B and C) can be used for additional adjustment if needed.
Page 5
TOP
ADJUSTABLE
LEVELERS