World Market 608163 User manual

THANK YOU FOR PURCHASING OUR QUALITY PRODUCT. IF YOU HAVE ANY
QUESTIONS PERTAINING TO THE ASSEMBLY OF THIS FURNITURE PIECE,
PLEASE CONTACT YOUR NEAREST WORLD MARKET STORE, OR CALL OUR
TOLL FREE NUMBER 877-967-5362 FOR ASSISTANCE.
Caspian Bar
R
Assembly Instructions
SKU - 608163
NOT FOR COMMERCIAL USE.
Page 1

Part List
Page 2
E: Back Frame - 1 pc
A: Top Frame - 1 pc B: Bottom Frame - 1 pc
D-2: Right Side Frame
- 1 pc
F-1: Left Door Frame
- 1 pc
F-2: Right Door Frame
- 1 pc G: Fixed Shelf - 1 pc I: Removable Shelf -
2 pcs
D-1: Left Side Frame
- 1 pc
C: Divider Frame - 1 pc
J: Adjustable Shelf - 1 pc K: Top Back Rail - 1 pc
L: Bottom Back Rail
- 1 pc
M: Glassware
Hanging Rail - 1 pc
O: Base Top Frame
- 2 pcs
P: Base Bottom Frame
- 2 pcs
H: Handle - 2 pcs
N: Base Side Frame
- 2 pcs

LABEL Description Q.TY PICTURE
Anti Tip-kit
Page 3
18
18
Cam lock Ø15 mm
1
Hardware List
LABEL DESCRIPTION QTY
1
T-1
T-2 Phillips Screwdriver
(Not Included) 1
PICTURE
Allen Key
4 x 110 x 30 mm
Tool List
H-1
H-2
H-3
H-4
H-5
H-6
H-7
H-8
H-9
H-10
Cam Screw
H-11
H-12
Screw M4 x 20 mm 4
10
Connecting Screw M7 x 50 mm
3Wood Screw 4 x 50 mm
16
Allen Bolt M6 x 20 mm
16
Lock Washer 6 x 10.5 x 1 mm
16
Flat Washer 6 x 16 x 1 mm
Pan Head Screw M4 x 45 mm 8
Pan Head Screw M3.5 x 20 mm 22
4
Shelf Pin Ø6

Before Beginning:
Read instructions, cover to cover.
2x
In case of missing parts, please contact your nearest World Market store or
our customer service call center 877-967-5362.
Assemble on a clean non-marring surface (packing foam).
Unpack all hardware bags and components to ensure you have all parts.
Have 2 adults on hand for assembly.
Do not assemble on flooring or carpet.
Save all packaging until finished.
Assembly Preparation
Page 4

Assembly Steps
Page 5
(T-2) Phillips Screwdriver
(H-2) Cam Screw x 18
D2
A
T-2
H-2
D1
G
Step 1
x8
Step 1.1: Install Cam Screws (H-2) into the pre-drilled holes on Left Side Frame (D-1) and Right Side Frame
(D-2) as shown. Fully tighten using a Phillips screwdriver (T-2) (not included).
Step 1.2: Place Top Frame (A) and Fixed Shelf (G) upside down onto a padded, non-marring surface. Install
Cam Screws (H-2) into the pre-drilled holes on Top Frame (A) and Fixed Shelf (G) as shown. Fully tighten
using a Phillips screwdriver (T-2) (not included).
T-2
H-2
x10
Step 1.1:
Step 1.2:

Step 2
Page 6
Step 3
(T-1) Allen key
(H-1) Cam Lock x 2
T-1
C
G
T-1
D-2
GC
Front
x2
x2
H-1
H-1
Front
Place Fixed Shelf (G) onto a padded, non-marring surface, oriented on its side as shown. Install Cam Locks
(H-1) into the corresponding holes on Divider Frame (C) as shown. Carefully lower Divider Frame (C) down
onto, making sure that the Cam Screws (H-2) installed on Fixed Shelf (G) fit up inside of Divider Frame (C).
Tighten all Cam Locks (H-1) using Allen Key (T-1) until they are snug.
Install Cam Locks (H-1) into the corresponding holes on Fixed Shelf (G) as shown. Position and secure the
Fixed Shelf (G) to Right Side Frame (D-2), making sure that the Cam Screws (H-2) installed on Right Side
Frame (D-2) fit up inside of Fixed Shelf (G) by securing the Cam Lock (H-1) using Allen Key (T-2) until snug.
(T-1) Allen key
(H-1) Cam Lock x 2

Step 4
Page 7
Step 5
T-1
H-1
K
L
D-2
x2
x2
Front
(T-1) Allen key
(H-1) Cam Lock x 6
Using a second person to assist you, rotate the assembly from Step 3 so that the FRONT faces down towards
the ground as illustrated. Install Cam Locks (H-1) into the corresponding holes on Fixed Shelf (G), Top Back
Rail (K) and Bottom Back Rail (L) as shown. Next, secure the assembly from step 3 and Right Side Frame
(D-2) to Top Back Rail (K) and Bottom Back Rail (L), making sure that the Cam Screws (H-2) installed face UP
inside Fixed Shelf (G), Top Back Rail (K) and Bottom Back Rail (L). Secure the Cam Locks (H-1) using Allen
Key (T-2) until snug.
T-1
T-1
H-1
H-1
x2
H-4
T-1
x10
(T-1) Allen key
(H-4) Connecting Screw x 10
Front
D-1
Install and secure Left Side Frame (D-1), Divider Frame (C) and Right Side Frame (D-2) to Bottom Frame (B)
using Connecting Screws (H-4). Engage all screws before fully tightening using Allen Key (T-1).
C

Page 8
Step 6
Step 7
(H-6) Allen Bolt x 16
(H-7) Lock Washer x 16
(H-8) Flat Washer x 16
(T-1) Allen key
Top
Step 6.1: Install and secure Base Top Frame (O) and Base Bottom Frame (P) to one of Base Side Frame (N)
using the Short Allen Bolt (H-6), Lock Washer (H-7) and Flat Washer (H-8), stacking the hardware in the order
shown. Engage all bolts by hand first, then tighten using an Allen Key (T-1).
Step 6.2: Continue attaching the Base Frame assembly to another Base Side Frame (N), performing assembly
as step 6.1.
(T-2) Phillips Screwdriver
(H-9) Pan Head Screw x 8
Front
H-9
T-2
x8
Attach the Leg Base Frame assembly (from Step 6) with the assembly from Step 5. Secure the frame using
Pan Head Screws (H-9). Engage all screws by hand and then fully tighten them using Phillips Screwdriver (T-2)
(not included).
6.1 6.2
x16
H-6
H-7
H-8
T-1
P
P
O
O
N
N

Step 8
Page 9
Using a second person to assist you, carefully turn the assembly from Step 7 upright. Install Cam Locks (H-1)
into the corresponding holes on Left Side Frame (D-1) and Right Side Frame (D-2) as shown. Next, lower Top
Frame (A) down onto the assembly, making sure that Cam Screws (H-2) installed on Top Frame (A) fit up
inside of Left Side Frame (D-1) and Right Side Frame (D-2). Tighten all Cam Locks (H-1) using Allen Key (T-1)
until they are snug.
(T-1) Allen key
(H-1) Cam Lock x 6
x6
Front
H-1
T-1
A

Step 10
Page 10
Step 9
(T-2) Phillips Screwdriver
(H-5) Wood Screw x 3
Install Cam Locks (H-1) into the corresponding holes on Top Back Rail (K) as shown. Secure the Top Back Rail
(K) to Top Frame (A) by Cam Lock (H-1) using Allen Key (T-2) until snug.
(T-1) Allen key
(H-1) Cam Lock x 2
Front x2
H-1
T-1
Front
H-5
T-2
x3
Position Glassware Hanging Rail (M) to the underside of Top Frame (A) as shown and secure it using Wood
Screws (H-5) and a Phillips Screwdriver (T-2) (not included).
NOTE: 3 other Glassware Hanging Rails come pre-installed on Top Frame (A).
M
K
A