World Market 590385 User manual

Assembly Instructions
NOT FOR COMMERCIAL USE
FLOATING WALL HOOKS
SKU-590385
THANK YOU FOR YOUR PURCHASE. IF YOU HAVE ANY QUESTIONS PERTAINING TO
THE ASSEMBLY OF THIS HOOK, PLEASE CONTACT THE NEAREST COST PLUS
WORLD MARKET STORE. IF YOU ARE NOT NEAR A STORE, PLEASE CALL OUR
CUSTOMER SERVICE CALL CENTER TOLL FREE AT 877-967-5362 FOR ASSISTANCE.
Page-1

H-1
LABEL
COMPONENT DESCRIPTION QTY
A
H-2
T-1
Component List
Tool List
Hardware List
LABEL
COMPONENT
DESCRIPTION QTY
LABEL
COMPONENT
DESCRIPTION QTY
HOOK
5
Included
5
Included
5
Included
Page-2
SCREW
ø4mm x 37mm
WALL PLUG
ø7mm x 36mm

Installation Instructions
H-1
Step-1 :- Pre-drill hole on desired locaon.
Insert Wall Plug (H-1) into the pre-drilled
holes as shown in the drawing.
Wall
H-2
T-1
H-1
Step-1
Barrel w/Screw
Step-2
Step-3
Note : Each Floating Hook can take maximum load of 4 lbs
Page-3
Assembled View
Step-2 :- Unscrew barrel from the Hook by
rotang it counter clockwise. Insert Screw
(H-2) into the barrel, align over installed Wall
plug (H-1) and fully ghten Screw (H-2) with
Screwdriver (T-1) (not included).
Step-3 :- Align Hook over barrel and rotate
clockwise unl secured.
Repeat above steps to install other Hooks as
desired.