World Market NEVIS 597197 User manual

NEAREST WORLD MARKET STORE.
Page 1
NOT FOR COMMERCIAL USE.
NEVIS ROPE OCCASIONAL CHAIR
SKU - 597197

A
E
Seat Frame
Seat Cushion
1
H-1
H-2
H-3
Allen Bolt (M6x45)mm
Spring Washer
Flat Washer (M6x1)mm
Allen Key
8
8
8
1
Page 2
1
T-1
BFront Leg 2
CBack Leg 2
DBack Cushion 1

Page 3
World Market store
or call our customer service call center at call 1-877-967-5362.

Page 4
H-1
H-2
H-3
Allen Bolt (M6x45)mm
Spring Washer
Flat Washer (M6x1)mm
Allen Key
x8
x8
x8
T-1 x1
Clockwise
B
B
C
A
C
H-1
H-2
H-3
T-1
Step 1
Prepare the assembly by placing Seat Frame (A), Front Leg (B) and Back Leg
down onto a
(
C),
padded, non-marring surface. Arrange the components as shown above.
Secure the Front Legs (B) and Back Legs (C) to Seat Frame (A) by using Allen Bolts (H-1),
Spring Washers (H-2) and Flat Washers (H-3), stacking the hardware in the order as shown.
Engage all bolts first, and then fully tighten them using Allen Key (T-1).
x2

Page 5
Step 2
Turn the chair upright. Place Seat Cushion (E), Back Cushion (D) into position
Assembly is now complete and the chair is ready for use.
NOTE: Levelers can be used for additional adjustment (if needed).
Ensure all bolts are fully tightened every 3 months to ensure stability.
as shown. Ensure all bolts have been fully tightened.
D
E
Leverlers Feetcap.

Page 6
CUSHION AND SLIP COVER CARE:
For minor spots wipe with a wet cloth and use a mild detergent. Do not use bleach.
Slip covers can also be placed in a washing machine.
Remove the slip cover from the insert, do not place insert in the washing machine.
Use gentle cycle, cold water and no bleach.
Line dry, do not place in the dryer.
We use a higher density foam to ensure the cushion does not break down in the outdoor elements.
Cushion will soften over time.
Flip the cushions to maintain the quality.
For best results remove cushions during cold or inclement weather and store in a dry area.
If cushions do become wet allow to completely dry before storing to prevent mold and mildew.

Page 7