World Market Tobias 608270 User manual

AssemblyInstructions
Tobias Dining Side Chair
SKU–608270
THANK YOU FOR YOUR PURCHASE. IF YOU HAVE ANY QUESTIONS
PERTAINING TO THE ASSEMBLY OF THIS FURNITURE PIECE, PLEASE CONTACT
THE NEAREST WORLD MARKET STORE.
IF YOU ARE NOT NEAR A STORE, PLEASE CALL OUR CUSTOMER SERVICE CALL
CENTER TOLL FREE AT 877- 967-5362 FOR ASSISTANCE.
NOT FOR COMMERCIAL USE.
Page 1

ComponentList
LABEL
DESCRIPTION
QTY
A
Seat Frame
1
B
Back Frame
1
C Front Leg 1
Hardware List
LA
BEL
DESCRIPTION QTY
H-1 Hex Bolt
M⅜” x 90mm
8
H-2
Flat Washer
8
H-3
Spring Washer
8
Tool List
LABEL
DESCRIPTION QTY
T-1
Wrench
1
Page 2

AssemblyPreparation
Before Beginning:
•Unpack all hardware bags and components to ensure you have all parts-
•Read instructions, cover to cover-
•Have 2 adults on hand for assembly-
•Do not assemble on flooring or carpet-
•Assemble on a clean non-marring surface (packing foam)-
•Save all packaging until finished-
•In case of missing parts, please contact your nearest World Market store or call our customer
service call center at call 1-877-967-5362.
Page 3

Assembly Steps
Step 1
- Lay Back Frame (B) down on its back and on a padded, non-marring surface with the front facing upward as shown.
- Align holes on the Back Frame (B) with corresponding holes on the corner of Seat Frame (A).
- Secure the corner of Seat Frame (A) using 2 pcs Bolts (H-1), Spring Washers (H-2) and Flat Washers (H-3),
stacking the hardware in the order as illustrated. Repeat the process for the other corner of Seat Frame (A).
- Secure the Front Leg (C) to the Seat Frame (A) using 2 pcs Bolts (H-1), Spring Washers (H-2) and Flat Washers
(H-3), stacking the hardware in the order as illustrated. Repeat the process for the other corner of Front Leg (C).
Engage all bolts by hand first, then fully tighten all Bolts (H-1) with the supplied Wrench (T-1).
- Carefully turn the chair assembly upright.
Step 2
- Check that all bolts have been fully tightened. Assembly is now complete and the product is ready for use.
Page 4
(H-1) Bolt x 8
(H-3) Spring Washer x 8
(H-2) Flat Washer x 8
H1
H2
A
T1
H3
FRONT
B
C

Care & Maintenance
•Do not put hot items directly on furniture surface.
•Do not clean furniture with harsh cleansers or polish.
•Do not place furniture in direct sunlight.
•Do not place furniture near heating or cooling vents.
•Do not write on furniture without a padded barrier to protect the
surface.
•Do not place furniture outside. For indoor use only.
•Not for commercial use. For residential use only.
•Dust and pick-up spills using a clean, non-colored, lint-free, dry
cloth.
Page 5