Worx WG163E User manual

WG163E WG163E.1 WG163E.2 WG163E.3 WG163E.5
WG163E.9
2-in-1 Grass Trimmer/Edger
2-in-1 Rasentrimmer/Kantenschneider
Coupe bordure/taille-haies 2 en 1
Tosaerba/tagliabordi 2-in-1
Cortacésped/recortadora de bordes 2 en 1
Aparador/corta-relvas 2 em 1
2-in-1 grasrandsnijder
2-i-1 græstrimmer/kantklipper
2-i-1 grastrimmer/kantklipper
2-n-1 Grästrimmer/kantklippare
Przycinarka/podkaszarka do trawy 2-w-1
/ 2  1
2 funkciós fűkasza/szegélyvágó
Instrument 2 în 1 pentru prelucrarea produselor din sticlă/tăierea muchiilor pentru produsele din sticlă
2-v-1 sekačkou/zastřihovačkou okrajů
Vyžínač trávy/Zastrihávač trávnikov 2 v 1
Obrezovalnik trate/kotni obrezovalnik, 2-v1
P09
P17
P26
P35
P44
P52
P61
P69
P77
P84
P92
P101
P111
P119
P128
P136
P145
EN
D
F
I
ES
PT
NL
DK
NOR
SV
PL
GR
HU
RO
CZ
SK
SL

Original instructions
Originalbetriebsanleitung
Notice originale
Istruzioni originali
Manual original
Manual original
Oorspronkelijke gebruiksaanwijzing
Original brugsanvisning
Opprinnelige Instruksjonene
Bruksanvisning i original
Instrukcja oryginalna
Ω ΔΩ 
Eredeti használati utasítás
Instrucţiuni originale
Původní návod k používání
Pôvodný návod na použitie
Izvirna navodila
EN
D
F
I
ES
PT
NL
DK
NOR
SV
PL
GR
HU
RO
CZ
SK
SL

12
13
15
14
9
3
5
6
7
8
10
11
12
4

1
1
2
2
1
1
1
22
2
2
2
1
2
1
3Click!
For WA3551.1 battery
For WA3551 battery
100 %
0%
2
2
100 %
0%
WA3760 WA3880
D1 D2
C
A1 A2
B

1
2
G2 H
2
1
2
3
1
100%
0%
For WA3551 battery
D3 E
F G1

TM
90o
L
J2
K
I2
J1
I1

1
1
2
2
One click
MN1
N2
O1 O2
N3

8
O3 O4

9
2-in-1 Grass Trimmer/Edger EN
PRODUCT SAFETY
GENERAL SAFETY WARNINGS
WARNING: Read all
safety warnings and all
instructions. Failure to follow
the warnings and instructions
may result in electric shock, fire
and/or serious injury.
Save all warnings and
instructions for future
reference.
The appliance is only to be used
with the power supply unit
provided with the appliance.
IMPORTANT
READ CAREFULLY BEFORE
USE
KEEP FOR FUTURE
REFERENCE
SAFE OPERATING PRACTICES
1. TRAINING
a) Read the instructions
carefully. Be familiar with the
controls and the correct use
of the machine.
b) Never allow children,
persons with reduced
physical, sensory or mental
capabilities or lack of
experience and knowledge
or people unfamiliar with
these instructions to use the
machine, local regulations
may restrict the age of the
operator.
c) Keep in mind that the
operator or user is
responsible for accidents or
hazards occurring to other
people or their property.
2. PREPARATION
a) Before use, always visually
inspect the machine for
damaged, missing or
misplaced guards or shields.
b) Never operate the machine
while people, especially
children, or pets are nearby.
3. OPERATION
a) Wear eye protection, long
trousers and stout shoes at
all times while operating the
machine.
b) Avoid using the machine
in bad weather conditions
especially when there is a
risk of lightning.
c) Use the machine only in
daylight or good artificial
light.
d) Never operate the machine
with damaged guards or
shields or without guards or
shields in place.
e) Switch on the motor only
when the hands and feet
are away from the cutting
means.
f) Always disconnect the

2-in-1 Grass Trimmer/Edger EN
10
machine from the power
supply (e.g. remove the
battery pack from the
machine)
1) whenever the machine is
left unattended;
2) before clearing a
blockage;
3) before checking, cleaning
or working on the machine;
4) after striking a foreign
object;
5) whenever the machine
starts vibrating abnormally.
g) Take care against injury to
feet and hands from the
cutting means. h) Always
ensure that the ventilation
openings are kept clear of
debris.
i) Never fit metal cutting
elements.
j) Always be sure of your
footing on slopes.
k) Walk, never run.
l) Not overreach and keep the
balance at all times.
m) Not to touch moving
hazardous parts before
removing the battery pack
from the machine and the
moving hazardous parts
have come to a complete
stop.
4. MAINTENANCE AND
STORAGE
a) Disconnect the machine
from the power supply (e.g.
remove the battery pack
from the machine) before
carrying out maintenance or
cleaning work.
b) Use only the manufacturer’s
recommended replacement
parts and accessories.
c) Inspect and maintain the
machine regularly. Have the
machine repaired only by an
authorized repairer.
d) When not in use, store the
machine out of the reach of
children.
SAFETY WARNINGS FOR
BATTERY PACK
a)Do not dismantle, open
or shred cells or battery
pack.
b)Do not short-circuit a
battery pack. Do not
store battery packs
haphazardly in a box or
drawer where they may
short-circuit each other
or be short-circuited by
conductive materials.
When battery pack is not
in use, keep it away from
other metal objects, like

11
2-in-1 Grass Trimmer/Edger EN
paper clips, coins, keys,
nails, screws or other small
metal objects, that can
make a connection from one
terminal to another. Shorting
the battery terminals
together may cause burns or
a fire.
c) Do not expose battery
pack to heat or fire. Avoid
storage in direct sunlight.
d)Do not subject battery
pack to mechanical
shock.
e) In the event of battery
leaking, do not allow
the liquid to come into
contact with the skin or
eyes. If contact has been
made, wash the affected
area with copious
amounts of water and
seek medical advice.
f) Keep battery pack clean
and dry.
g)Wipe the battery pack
terminals with a clean
dry cloth if they become
dirty.
h)Battery pack needs to
be charged before use.
Always refer to this
instruction and use
the correct charging
procedure.
i) Do not maintain battery
pack on charge when not
in use.
j) After extended periods
of storage, it may be
necessary to charge and
discharge the battery
pack several times
to obtain maximum
performance.
k)Recharge only with the
charger specified by
Worx. Do not use any
charger other than that
specifically provided for
use with the equipment.
l) Do not use any battery
pack which is not
designed for use with the
equipment.
m) Keep battery pack out
of the reach of children.
n)Retain the original
product literature for
future reference.
o) Remove the battery from
the equipment when not
in use.
p)Dispose of properly.
q)Do not mix cells of
different manufacture,
capacity, size or type
within a device.
r) Keep the battery away
from microwaves and
high pressure.

2-in-1 Grass Trimmer/Edger EN
12
SYMBOL
Read operator’s manual
Batteries may enter water cycle if
disposed improperly, which can
be hazardous for ecosystem. Do
not dispose of waste batteries as
unsorted municipal waste
Do not burn
Wear eye and ear protection
Keep bystanders away
Do not expose to rain
Wear protective gloves
Waste electrical products must
not be disposed of with household
waste. Please recycle where
facilities exist. Check with your
local authorities or retailer for
recycling advice.
Edging
Trimming
Make sure the battery is removed
prior to changing accessories.
Lock
Unlock
Li-I on
Li-Ion battery This product has
been marked with a symbol relating
to ‘separate collection’ for all
battery packs and battery pack. It
will then be recycled or dismantled
in order to reduce the impact on
the environment. Battery packs can
be hazardous for the environment
and for human health since they
contain hazardous substances
COMPONENT LIST
1. LOCK OFF BUTTON
2. REAR HANDLE
3. ONOFF SWITCH
4. BATTERY PACK 
5. HANDLE UNLOCK BUTTON
6. UPPER SHAFT
7. LOCKING COLLAR
8. LOWER SHAFT
9. SAFETY GUARD
10. FLOWER GUARD
11. AUXILIARY HANDLE
12. COMMAND FEED BUTTON
13. EDGER WHEEL
14. LINE FEED BUTTON
15. LINE CUTTER
* Not all the accessories illustrated or described are
included in standard delivery.

13
2-in-1 Grass Trimmer/Edger EN
TECHNICAL DATA
Type WG163E WG163E.1 WG163E.2 WG163E.3WG163E.5
WG163E.9 (1-designation of machinery, representative
of Battery- powered Lawn Trimmer)
WG163E
WG163E.1
WG163E.5
WG163E.2
WG163E.3 WG163E.9
Voltage 20V MAX**
No load
speed 7600/min
Cutting
diameter 30cm
Line
diameter 1.65mm
Charging
time 5hr 1 hr /
Machine
weight 2.4kg 2kg
**Voltage measured without workload. Initial battery voltage
reaches maximum of 20 volts. Nominal voltage is 18 volts.
NOISE DATA
A weighted sound pressure LpA = 74dB(A)
KpA&KWA 3.0dB(A)
A weighted sound power LwA = 90dB(A)
Wear ear protection
VIBRATION INFORMATION
Vibration emission value ah<1.8m/s
Uncertainty K = 1.5m/s
The declared vibration total value may be used for
comparing one tool with another, and may also be used in a
preliminary assessment of exposure.
WARNING! The vibration emission value during actual
use of the power tool can differ from the declared
value depending on the ways in which the tool is used
dependant on the following examples and other variations
on how the tool is used:
How the tool is used and the materials being cut or drilled.
The tool being in good condition and well maintained.
The use the correct accessory for the tool and ensuring it is
sharp and in good condition.
The tightness of the grip on the handles and if any anti
vibration accessories are used.
And the tool is being used as intended by its design and
these instructions.
This tool may cause hand-arm vibration syndrome if
its use is not adequately managed.
WARNING! To be accurate, an estimation of exposure
level in the actual conditions of use should also take
account of all parts of the operating cycle such as the times
when the tool is switched off and when it is running idle but
not actually doing the job. This may significantly reduce the
exposure level over the total working period.
Helping to minimize your vibration exposure risk.
ALWAYS use sharp chisels, drills and blades.
Maintain this tool in accordance with these instructions and
keep well lubricated (where appropriate).
If the tool is to be used regularly then invest in anti vibration
accessories.
Plan your work schedule to spread any high vibration tool
use across a number of days.
ACCESSORIES
WG163E WG163E.1 WG163E.2 WG163E.3 WG163E.5 WG163E.9
Flower
guard
11111 1
Charger
1
(WA3760)
1
(WA3760) 1
(WA3880) 1 (WA3880) 1
(WA3760)
/
Battery
pack
2
(WA3551.1)
1
(WA3551) 1
(WA3551) 2 (WA3551) 2
(WA3551.1)
/
Spool
(WA0004)
11112 1
Safety
guard
11111 1
Edger
wheel
11111 1
Spool Cap ////
2
(WA0217)
/
We recommend that you purchase your accessories from
the same store that sold you the tool. Refer to the accessory
packaging for further details. Store personnel can assist you
and offer advice.

2-in-1 Grass Trimmer/Edger EN
14
ASSEMBLY AND OPERATION
NOTE Before using the tool, read the instruction
book carefully.
Intended Use
The machine is intended for the cutting of grass and
weeds under bushes, as well as on slopes and edges that
can not be reached with the lawn mower.
WARNING! The charger and battery pack are
specially designed to work together so do not
attempt to use any other devices. Never insert or allow
metallic objects into your charger or battery pack
connections because of an electrical failure and hazard
will occur.
WARNING! Always wear the eye protection. Never
lean over the trimmer head. Rocks or debris can
ricochet or be thrown into eyes and face and cause
blindness or other serious injury. When operating unit,
check for the following:
Wear eye protection and heavy clothing. Hold front handle
with one hand and auxiliary handle with the other hand.
Keep unit below waist level. Work only from your right
to your left to ensure debris is thrown away from you.
Without bending over, keep line near and parallel to the
ground (perpendicular when edging) and not crowded
into material being cut.
WARNING! Make sure that line is fed out before
operation. Make sure motor is up to full speed
before trimming or edging.
WARNING! Only use 1.65mm diameter cutting
line. Other sizes of line will not feed properly and
will result in improper cutting head function or can cause
serious injury. Do not use other material such as wire,
string, rope, etc. Wire can break off during cutting and
become a dangerous projectile that can cause serious
injury.
ASSEMBLY & OPERATION
Action Figure
Assembly
Assembling the Safety Guard See Fig. A1, A2
Mounting the Edger Wheel
WARNING Make Sure the
ON/OFF Switch is Locked Off
to Prevent Accidental Starting.
See Fig. B
Installing and Removing the Battery
Pack See Fig. C
Charging the battery pack
More details can be found in charger’s
manual See Fig. D1, D2
Checking the battery condition
(Only for WG163E.1, WG163E.2,
WG163E.3,WG163E.5) See Fig. D3
Operation
Safety ON/OFF Switch
WARNING! The cutting head
continues to rotate after the
trimmer has been switched off; wait
until it has completely stopped then
lay down the tool.
See Fig. E
Trimming
- Adjusting the Shaft
WARNING! Make Sure the ON/
OFF Switch is Locked Off to
Prevent Accidental Starting.
See Fig. F
- Adjusting the Trimmer Head See Fig. G1, G2
- Adjusting the Auxiliary handle See Fig. H
- Trimming See Fig. I1
- Using the Flower Guard See Fig. I2
Edging
- Changing the tool into the Edging
mode See Fig. J1, J2
- Edging See Fig. K
Command feeding the line
- Note: Press as needed. See Fig. L
Manually feeding the line See Fig. M
Replacing the trimmer Spool See Fig. N1, N2, N3
Manually winding the line See Fig. O1, O2,
O3, O4
WORKING HINTS
1. AUTOMATIC LINE FEED SYSTEM
When initially switching on the trimmer, a small length of
line is fed out.
A ‘clattering’ noise will be heard when the lines hit the Line
Cutter. DO NOT BE ALARMED. This is quite normal. After
about 5 seconds the line will be cut to the correct length
and the noise will reduce as the motor gains full speed.
If the noise of the line being cut can’t be heard, more line
will need to be fed out.
To feed more line, it is first necessary to allow the trimmer
to stop completely; it must come to a complete rest, then
restart, allowing the motor to reach full speed.
Repeat above until you hear the line hitting against the
Line Cutter.

15
2-in-1 Grass Trimmer/Edger EN
2. (See Fig. L)
Your grass trimmer is equipped with a Command Feed
System. Just press the button while the machine is
running, new line will feed out and then stop when you
hear the ‘clattering’ noise of the new line being cut. The
motor stops briefly when the Command Feed button is
pressed, and restarts when released. This process enables
the machine to automatically feed out new line.
3. MANUALLY FEEDING THE LINE (See Fig. M)
Press and release manual line feed button (14), whilst
gently pull out the lines until the lines reaches the line
cutter.
If the line extends past the line cutter, too much line has
been fed out.
If too much line is fed out, remove the cutting head cover
and rotate the spool anti-clockwise until the line is at the
desired length.
MAINTENANCE
After use, disconnect the battery from the tool and check
for damage.
Your power tool requires no additional lubrication or
maintenance. There are no user serviceable parts in your
power tool. Never use water or chemical cleaners to clean
your power tool. Wipe clean with a dry cloth. Always store
your power tool in a dry room temperature location. Keep
the motor ventilation slots clean. Keep all working controls
free of dust.
ENVIRONMENTAL PROTECTION
Waste electrical products must not be disposed
of with household waste. Please recycle where
facilities exist. Check with your local authorities or
retailer for recycling advice.
TROUBLESHOOTING
The following table gives problems and actions that you can perform if your machine does not operate correctly.
WARNING Switch the machine off and remove the battery prior to any troubleshooting.
Problems Possible Causes Corrective Action
Trimmer fails to operate. Battery discharged.
Battery too hot/cold.
Motor is broken.
Internal wiring of machine damaged.
Recharge battery; also see
the content in charger manual.
Allow to cool/warm.
Contact Service Agent.
Contact Service Agent.
Trimmer runs
intermittently. Motor is broken. Battery not fully charged.
On/Off switch defective.
Contact Service Agent.
Recharge battery.
Contact Service Agent.
Excessive vibrations/
noise. Machine defective. Line spool is not wound well. Contact Service Agent. Rewind the line. See “MANUALLY
WINDING THE LINE” (Fig. O1, O2, O3, O4).
Cutting time per battery
charge too short. Battery has not been used for long period or only charged for short term.
Grass too high.
Battery defective.
Recharge battery; also see
the content in charger manual.
Cut in stages.
Replace the battery.
Machine does not cut. Line broken.
Battery not fully charged.
Motor is broken (speed is too low).
Grass entangled around cutting head.
Replace the line.
Recharge battery; also see
the content in charger manual.
Contact Service Agent.
Remove grass.
Continuous lighting
of the battery charge
indicator.No charging
procedure possible.
Battery not (properly) inserted.
Battery contacts contaminated.
Battery defective.
Properly insert battery into battery
charger.
Clean the battery contacts or replace the
battery.
Replace the battery.

1616
2-in-1 Grass Trimmer/Edger EN
16
Battery charge indicator
does not light up. Plug of battery charger not plugged in (properly).
Socket outlet, mains cable or battery
charger defective.
Insert mains plug (fully) into the socket
outlet.
Check the mains voltage; have the
battery charger checked by an authorized
after-sales service agent.
Auto Feed/Command
feed does not work Cutting line is not wound well. The line is tangled.
Line is used up.
Manually feed the line, if still cannot feed
out, remove the Spool out and rewind
the line.
Replace with a new spool of line.
DECLARATION OF CONFORMITY
We,
POSITEC Germany GmbH
Grüner Weg 10, 50825 Cologne, Germany
On behalf of Positec declare that the product
Description Battery-powered Grass Trimmer
Type WG163E WG163E.1 WG163E.2 WG163E.3
WG163E.5 WG163E.9 (1-designation of machinery,
representative of Battery- powered Lawn Trimmer)
Function Cutting grass and similar soft vegetation
and for trimming grass edges
Complies with the following Directives:
2006/42/EC, 2014/30/EU, 2011/65/EU&(EU)2015/863,
2000/14/EC amended by 2005/88/EC
2000/14/EC amended by 2005/88/EC:
- Conformity Assessment Procedure as perAnnex VI
- Measured Sound Power Level 86dB(A)
- Declared Guaranteed Sound Power Level 90dB(A)
The notified body involved
Name: ISET S.r.l. Unipersonale
Address: Via Donatori di sangue, 9-46024 Moglia (MN)
Standards conform to
EN 60335-1
EN 50636-2-91
EN 62233
EN ISO 3744
EN 55014-1
EN 55014-2
The person authorized to compile the technical file,
Name: Marcel Filz
Address: Positec Germany GmbH, Grüner Weg 10,
50825 Cologne, Germany
2021/04/07
Allen Ding
Deputy Chief Engineer, Testing & Certification
Positec Technology (China) Co., Ltd
18, Dongwang Road, Suzhou Industrial
Park, Jiangsu 215123, P. R. China

2-in-1 Rasentrimmer/Kantenschneider D
171717
PRODUKTSICHERHEIT
ALLGEMEINE
SICHERHEITSHINWEISE
WARNUNG: Lesen Sie alle
Sicherheitshinweise und
Anweisungen. Versäumnisse
bei der Einhaltung der
Sicherheitshinweise und
Anweisungen können
elektrischen Schlag, Brand und/
oder schwere Verletzungen
verursachen.
Bewahren Sie alle
Sicherheitshinweise und
Anweisungen für die Zukunft
auf.
Das Gerät darf nur mit dem
mitgelieferten Netzteil
verwendet werden.
WICHTIG
VOR GEBRAUCH BITTE GENAU
DURCHLESEN
FÜR SPÄTERE BEZUGNAHME
AUFBEWAHREN
SICHERE
ARBEITSVERFAHREN
1. TRAINING
a) Die Anweisungen
aufmerksam durchlesen.
Machen Sie sich mit den
Bedienelementen und
dem vorschriftsmäßigen
Gebrauch dieses Gerät
vertraut.
b) Lassen Sie niemals
Kinder, Personen mit
eingeschränktenphysischen,
sensorischen oder mentalen
Fähigkeiten und Erfahrung
oder Personen, die nicht mit
diesen Anweisungen vertraut
sind, die Maschine bedienen.
Lokale Vorschriften können
das Alter des Bedieners
einschränken.
c) Die Bedienperson bzw. der
Benutzer ist für Unfälle
oder Schäden an anderen
Menschen oder deren
Eigentum verantwortlich.
2. VORBEREITUNG
a) Bevor Sie die Maschine
verwenden, untersuchen
Sie diese stets auf sichtbare
Schäden, fehlende
oder falsch platzierte
Abdeckungen oder
Schutzschilde.
b) Benutzen Sie die Maschine
niemals während sich
Personen, insbesondere
Kinder, oder Tiere in
unmittelbarer Nähe
aufhalten.
3. BETRIEB
a) Tragen Sie beim Betrieb
der Maschine stets
Augenschutz, lange Hosen
und festes Schuhwerk.
2-in-1 Rasentrimmer/Kantenschneider D

2-in-1 Rasentrimmer/Kantenschneider D
1818
b) Vermeiden Sie die Nutzung
der Maschine bei schlechtem
Wetter, besonders wenn die
Gefahr eines Blitzschlags
besteht.
c) Verwenden Sie die Maschine
nur bei Tageslicht oder
gutem künstlichen Licht.
d) Bedienen Sie die Maschine
niemals mit beschädigten
oder fehlenden
Schutzvorrichtungen oder
Abdeckungen.
e) Schalten Sie den Motor
nur ein, wenn die Hände
und Füße fern vom
Schneidebereich sind.
f) Klemmen Sie die
Maschine stets von der
Stromversorgung ab(z. B.
entfernen Sie das Akkupack
aus der Maschine)
1) wenn die Maschine
unbeaufsichtigt gelassen
wird;
2) sie ein Hindernis
wegräumen;
3) sie die Maschine
überprüfen, säubern oder an
der Maschine arbeiten;
4) nach der Kollision mit
einem Fremdkörper;
5) immer, wenn die Maschine
ungewöhnlich zu vibrieren
beginnt.
g) Achten Sie darauf, Ihre
Hände und Füße nicht an
den Schneidwerkzeugen zu
verletzten.
h) Lüftungsöffnungen
regelmäßig kontrollieren und
säubern.
i) Niemals
Schneidvorrichtungen aus
Metall anbauen.
j) Auf schrägen Flächen stets
auf sicheren Tritt achten.
k) Gehen Sie, laufen Sie nicht.
l) Lehnen Sie sich nicht hinaus,
und halten Sie stets das
Gleichgewicht.
m) Berühren Sie keine
gefährlichen beweglichen
Teile, bevor die Maschine
von der Stromversorgung
getrennt wurde und die
beweglichen Teile vollständig
zum Stillstand gekommen
sind.
4. WARTUNG UND
AUFBEWAHRUNG
a) Klemmen Sie die Maschine
von der Stromversorgung
ab(z. B. entfernen Sie das
Akkupack aus der Maschine),
bevor Sie Wartungs- oder
Reinigungsarbeiten
durchführen.
b) Verwenden Sie
ausschließlich vom
Hersteller empfohlene

2-in-1 Rasentrimmer/Kantenschneider D
1919
Ersatzteile und Zubehör.
c) Untersuchen und warten Sie
die Maschine regelmäßig.
Lassen Sie die Maschine
nur von einem autorisierten
Fachmann reparieren.
d) Lagern Sie das Gerät
außerhalb der Reichweite
von Kindern, wenn es nicht
gebraucht wird.
SICHERHEIT HINWEISE FÜR
AKKUPACK
a)Zellen bzw. Akkupack
nicht zerlegen, öffnen
oder zerdrücken.
b)Akkupack nicht
kurzschließen. Akkupacks
nicht wahllos in einer
Schachtel oder Schublade
aufbewahren, wo sie
einander kurzschließen
oder durch andere
leitfähige Materialien
kurzgeschlossen
werden könnten. Bei
Nichtverwendung des
Akkupacks ist dieses
von Metallgegenständen
fernzuhalten, wie etwa
Büroklammern, Münzen,
Nägeln, Schrauben
oder anderen kleinen
Metallgegenständen, wo
sich die Batterieklemmen
berühren könnten.
Das Kurzschließen der
Batterieklemmen kann
Verbrennungen bzw. einen
Brand verursachen.
c)Zellen bzw. Akkupacks
nicht Hitze oder Feuer
aussetzen. Lagerung in
direktem Sonnenlicht
vermeiden.
d)Akkupack nicht
mechanischen Stößen
aussetzen.
e)Im Fall, dass Flüssigkeit
aus dem Akku austritt,
darf diese nicht in Kontakt
mit der Haut oder den
Augen kommen. Sollte
dies dennoch geschehen,
den betroffenen Bereich
sofort mit viel Wasser
spülen und einen Arzt
aufsuchen.
f)Akkupack sauber und
trocken halten.
g)Sollten die Klemmen des
Akkupacks schmutzig
werden, diese mit einem
sauberen, trockenen Tuch
abwischen.
h)Akkupackmuss vor
Gebrauch aufgeladen
werden. Immer dieses
Anweisungen beachten
und den korrekten
Ladevorgang ausführen.

2-in-1 Rasentrimmer/Kantenschneider D
2020
i) Akkupack bei
Nichtverwendung nicht
längere Zeit aufladen
lassen.
j) Nach längerer Lagerung
des Gerätes ist es
eventuell notwendig, die
Zellen oder das Akkupack
mehrere Male aufzuladen
und zu entladen, um eine
optimale Leistung zu
erhalten.
k)Nur mit dem von Worx
bezeichneten Ladegerät
aufladen. Kein Ladegerät
verwenden, das nicht
ausdrücklich für den
Gebrauch mit dem Gerät
vorgesehen ist.
l) Kein Akkupack
verwenden, das nicht für
den Gebrauch mit dem
Gerät vorgesehen ist.
m)Akkupacks von Kindern
fernhalten.
n)Die originalen
Produktunterlagen zum
späteren Nachschlagen
aufbewahren.
o)Den Akku bei
Nichtverwendung aus
dem Gerät nehmen.
p)Ordnungsgemäß
entsorgen.
q)Vermischen Sie keine
Zellen verschiedener
Hersteller, Kapazitäten,
Größen oder Typen
innerhalb eines Geräts.
r)Halten Sie den Akku von
Mikrowellen und hohem
Druck fern.
SYMBOLE
Bedienungsanleitung lesen
Batterien können bei falscher
Entsorgung in der Wasserkreislauf
gelangen und das Ökosystem bed-
rohen. Entsorgen Sie alte Batterien
nicht im unsortierten Haushalt-
sabfall.
Nicht verbrennen
Tragen Sie Augen- und Gehörschutz
Schutzhandschuhe tragen
Halten Sie einen
Sicherheitsabstand zu
Unbeteiligten ein.
Vor Regen schützen