Woxcon MMX3232-N User manual

MMX3232-N
Modular Matrix Switcher 32x32
All Rights Reserved
Version: MMX3232-N_2017V2.6
User Manual

Modular Matrix Switcher 32x32
Preface
Read this user manual carefully before using this product. Pictures shown in this
manual is for reference only, different model and specifications are subject to real
product.
This manual is only for operation instruction only, not for any maintenance usage. In
the constant effort to improve our product, we reserve the right to make functions or
parameters changes without notice or obligation. Please refer to the dealers for the
latest details.
Trademarks
Product model, and logo are trademarks. Any other trademarks mentioned in this
manual are acknowledged as the properties of the trademark owner. No part of this
publication may be copied or reproduced without prior written consent.
FCC Statement
This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful
interference to radio communications. It has been tested and found to comply with
the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful interference in
a commercial installation.
Operation of this equipment in a residential area is likely to cause interference, in
which case the user at their own expense will be required to take whatever
measures may be necessary to correct the interference.
Any changes or modifications not expressly approved by the manufacture would
void the user’s authority to operate the equipment.

Modular Matrix Switcher 32x32
SAFETY PRECAUTIONS
To insure t h e best from the product, p l e a s e read all instruct i o n s carefully before
using the device. Save this manual for further reference.
l Unpack the equipment carefully and save the original box and packing material
for possible future shipment
l Follow basic safety precautions to reduce the risk of fire, electrical shock and
injury to persons.
l Do not dismantle the housing or modify the module. It may result in electrical
shock or burn.
l Using supplies or parts not meeting the products’ specifications may cause
damage, deterioration or malfunction.
l Refer all servicing to qualified service personnel.
l To prevent fi r e o r shock hazard, do not expose the unit to rain, moisture or install
this product near water.
l Do not put any heavy items on the extension cable in case of extrusion.
l Do not remove the housing of the device as opening or removing housing may
expose you to dangerous voltage or other hazards.
l Install the device in a place with fine ventilation to avoid damage caused by
overheat.
l Keep the module away from liquids.
l Spillage into the housing may result in fire, electrical shock, or equipment
damage. If an object or liquid falls or spills on to the housing, unplug the module
immediately.
l Do not twist or pull by force ends of the optical cable. It can cause malfunction.
l Do not use liquid or aerosol cleaners to clean this unit. Always unplug the power
to the device before cleaning.
l Unplug the power cord when left unused for a long period of time.
l Information on disposal for scrapped devices: do not burn or mix with general
household waste, please treat them as normal electrical wastes.

Modular Matrix Switcher 32x32
Table of Contents
1. Introduction .................................................................................................................. 1
1.1. About Modular Matrix Switcher 32x32 ............................................................... 1
1.2. Features ............................................................................................................ 1
1.2.1. Modular Matrix Switcher signal card (changeable cards) ....................... 2
1.3. Package List ...................................................................................................... 3
2. Panel Description ........................................................................................................ 4
2.1. Modular Matrix Switcher 32x32 ......................................................................... 4
2.1.1. Front Panel .............................................................................................. 4
2.1.2. Rear Panel .............................................................................................. 5
2.2. Changeable Cards ............................................................................................ 6
2.2.1. 4I-DV & 4O-DV ........................................................................................ 6
2.2.2. 4I-DS& 4O-DS ......................................................................................... 7
2.2.3. 4I-HD & 4O-HD ....................................................................................... 8
2.2.4. 4I-HS & 4O-HS ...................................................................................... 10
2.2.5. 4I-VG & 4O-VG ..................................................................................... 10
2.2.6. 4I-VA ...................................................................................................... 12
2.2.7. 4I-SD & 4O-SD ...................................................................................... 12
2.2.8. 4I-SS ..................................................................................................... 13
2.2.9. 4I-TP & 4O-TP ....................................................................................... 13
2.2.10. 4I-UH & 4O-UH ................................................................................... 14
2.2.11. 4I-UF & 4O-UF .................................................................................... 15
2.2.12. 4I-BT & 4O-BT ..................................................................................... 16
3. System Connection ................................................................................................... 18
3.1. Usage Precautions .......................................................................................... 18
3.2. Connection Diagram ........................................................................................ 18
3.3. Application ....................................................................................................... 19
4. Control Operations .................................................................................................... 20
4.1. Front Panel Button control ............................................................................... 20
4.2. IR Remote control ............................................................................................ 21
4.3. RS232 Control ................................................................................................. 21

Modular Matrix Switcher 32x32
4.3.1. Connection of RS232 Communication Port .......................................... 21
4.3.2. RS232 Communication Commands ...................................................... 22
4.4. TCP/IP Control (Optional) ................................................................................ 32
4.4.1. Control Modes ....................................................................................... 32
4.4.2. Control Modular Matrix Switcher 32x32 via TCP/IP communication
software ........................................................................................................... 34
4.4.3. TCP/IP Configuration ............................................................................ 35
5. Specification .............................................................................................................. 36
5.1. Main Unit ......................................................................................................... 36
5.2. Changeable Cards .......................................................................................... 36
5.2.1. 4I-DV & 4O-DV ...................................................................................... 36
5.2.2. 4I-DS & 4O-DS ...................................................................................... 37
5.2.3. 4I-HD & 4O-HD ..................................................................................... 37
5.2.4. 4I-HS & 4O-HS ...................................................................................... 38
5.2.5. 4I-VG & 4O-VG ..................................................................................... 38
5.2.6. 4I-VA ...................................................................................................... 39
5.2.7. 4I-SD & 4O-SD ...................................................................................... 39
5.2.8. 4I-SS ..................................................................................................... 40
5.2.9. 4I-TP & 4O-TP ....................................................................................... 40
5.2.10. 4I-UH & 4O-UH ................................................................................... 41
5.2.11. 4I-UF & 4O-UF .................................................................................... 41
5.2.12. 4I-BT & 4O-BT ..................................................................................... 42
6. Troubleshooting & Maintenance ................................................................................ 43
7. Customer Service ...................................................................................................... 46

Modular Matrix Switcher 32x32
1
1. Introduction
1.1. About Modular Matrix Switcher 32x32
Modular Matrix Switcher 32x32 is a high-performance video and audio modular
matrix switcher supporting max 32 input signal sources and 32 output display
synchronously. It supports different video signals with cross switching. Every video
or audio signal is transmitted and switched independently to decrease signal
attenuation. Modular Matrix Switcher 32x32 supports various changeable cards
including HMDI, DVI, VGA, SDI and HDBaseT etc. Users can choose to insert
different signal card for different application.
Modular Matrix Switcher 32x32 have power fail memory function and audio can
break away from or follow the video to switch. It has RS232 port for serial control
and optional IP port for TCP/IP control, can be easily controlled by third-part
devices.
With its flexible design, Modular Matrix Switcher 32x32 can be used for different
project and tend to be an all-in-one solution. It is the combo solution for multimedia
conference rooms, control rooms, broadcasting rooms, shopping center etc. It will
handle all the audiovisual management, including the switching, driving, scaling etc.
1.2. Features
l Modular chassis with configurable I/O slots, ranging from 4x4 to 32x32.
l Various I/O cards, includes HDMI, HDBaseT, SD/HD/3G-SDI, DVI and VGA
cards (Compatible with YUV, YC & CVBC.) to configure any matrix.
l Truly cross-point switching, any input to any output, regardless signal format.
l Support HDMI1.4a, support 3D.
l Integrated HDBaseT technology.
l Controllable via button, RS232 & optional TCP/IP, also compatible with 3rd
parties control.
l HDCP compliant.
l LCD display.

Modular Matrix Switcher 32x32
2
1.2.1. Modular Matrix Switcher signal card (changeable cards)
Modular Matrix Switcher 32x32 supports multiple signal cards as listed in the
following charts:
Input Cards
Spec
Models
Inputs
Signal Format
4I-HD
4
HDMI
4I-HS
4
HDMI& analog audio
4I-DV
4
DVI
4I-DS
4
DVI, HDMI, VGA, AV,
YPbPr
4I-VG
4
VGA
4I-VA
4
VGA& analog audio
4I-SD
4 inputs& LOOP
SDI
4I-SS
4 inputs& LOOP
SDI
4I-TP
4
HDMI TP, IR, RS232
4I-UH
4
HDMI& analog Audio
4I-UF
4
Optical Fiber
4I-BT
4
HDBT, RS232, Audio
Output Cards
Spec
Models
Outputs
Signal Format
4O-HD
4
HDMI
4O-HS
4
HDMI& analog audio
4O-DV
4
DVI
4O-DS
4
DVI, HDMI, VGA, AV,
YPbPr
4O-VG
4 VGA& Stereo
audio
VGA, analog audio
4O-SD
4 outputs& LOOP
SDI
4O-TP
4
HDMI TP, IR, RS232
4O-UH
4
HDMI& analog Audio
4O-UF
4
Optical Fiber
4O-BT
4
HDBT, RS232, Audio

Modular Matrix Switcher 32x32
3
1.3. Package List
l 1 x Modular Matrix Switcher 32x32
l 1 x Power Cord
l 1 x IR remote (Not include battery)
l 4 x Plastic cushions
l 1 x RS232 cable
l 1 x User manual
Notes: Confirm all the accessories are included, if not, please contact with the
dealers.

Modular Matrix Switcher 32x32
4
2. Panel Description
2.1. Modular Matrix Switcher 32x32
2.1.1. Front Panel
Figure 2- 1 Front Panel of Modular Matrix Switcher 32x32
No.
Name
Description
①
IR
IR sensor, receive IR signal sent from IR remote
②
Power
indicator
Illuminate red once powered on
③
LCD
screen
Display real-time operation status
④
INPUTS
Back-lit buttons for input selection, ranges from 0~ 9, 32 selectable
channels in total.
⑤
OUTPUTS
Back-lit buttons for output selection, ranges from 0 ~ 9, 32
selectable channels in total.
⑥
MENU
AV: Transfer video and audio signal synchronously
‚: division button, to divide the output channels when switching to
more than one channel.
ENTER: Confirm switching operation. Operation will not be
executed by the matrix without confirmation.
ALL: To transfer an input channel to all output channels.

Modular Matrix Switcher 32x32
5
THROUGH: To transfer the signals directly to the corresponding
output channels.
UNDO: Undo button, to resume to the status before the command
just performed.
ß
: Backspace button, to backspace the last press.
2.1.2. Rear Panel
Figure 2- 2 Rear Panel of Modular Matrix Switcher 32x32
No.
Name
Description
①
INPUTS
Input signal card slots, 8 in total
②
OUTPUTS
Output signal card slots, 8 in total
③
Power
switch
Switch between AC110V and AC230V to access different power
④
TCP/IP
(Optional) Used for TCP/IP control port
⑤
RS232
Serial control port, connect with RS232 port of control device.
⑥
Power
ports
Connect with household alternating current power, including one
redundant power.
Note: There are only 8 input and 8 output slots for Modular Matrix Switcher 32x32,
which enables only 8 input cards and 8 output cards to be installed on Modular
Matrix Switcher 32x32. The input/output cards can be changed based on your
requests and supports hot plug and play.

Modular Matrix Switcher 32x32
6
2.2. Changeable Cards
Modular Matrix Switcher 32x32 supports expansion through various changeable
input/ output cards of different signals including DVI, HDMI, VGA, twisted pair, SDI
etc. Here is a brief introduction to the changeable cards.
2.2.1. 4I-DV & 4O-DV
DVI signal card. (Please check the specification from 5.2.1)
It is fully compatible with HDMI1.3 and HDCP, but not supporting analogy signal.
It is embedded EDID management technology, supporting DDC.
4I-DV: input card, maximum four input signal. Input signal can pass to output device
through 4O-DV or other kinds of output cards.
4O-DV: output card, maximum four output signal, output signals from 4I-DV, or other
kinds of input cards.
Pin Layout of the DVI-I connector (Dual-Link). (Female)
Pin
Function
Pin
Function
1
T.M.D.S.Data2-
13
T.M.D.S.Data3+
2
T.M.D.S.Data2+
14
+5V Power
3
T.M.D.S. Dat a
2/4 Shield
15
Ground (return for
+5V,
Hsync and Vsync)
4
T.M.D.S. Data 4 -
16
Hot Plug Detect
5
T.M.D.S. Dat a
4+
17
T.M.D.S. Dat a 0 -
6
DDC Clock
18
T.M.D.S. Dat a 0 +
7
DDC Data
19
T.M.D.S. Dat a 0 / 5
Shield
8
Analog Vertical
Sync
20
T.M.D.S.Data5-
9
T.M.D.S.Data1-
21
T.M.D.S.Data5+

Modular Matrix Switcher 32x32
7
10
T.M.D.S.Data1+
22
T.M.D.S. Cl o c k
Shield
11
T.M.D.S.Data1/ 3
Shield
23
T.M.D. S. C l o c k +
12
T.M.D.S.Data3-
13
T.M.D.S.Data3+
C1
RED
C2
Analog Green
C3
Analog Blue
C4
Horizontal Sync
Analog
C5
GND
Note: Pin C1~C5 are not used in 4I-DV & 4O-DV.
2.2.2. 4I-DS& 4O-DS
Seamless DVI signal card. (Please check the specification from 5.2.2)
It is fully compatible with HDMI1.3& HDCP, and supports seamless transmission for
high-definition DVI, HDMI, VGA, AV, YPbPr signals. Signal format can be modified
via RS232 commands.
It boasts embedded EDID management (only for HDMI/ DVI signal), supporting
DDC.
4I-DS: seamless input card, maximum four input signal. It can automatically identify
the format of input signal. Input signal can pass to output device through 4O-DS, or
other kinds of output cards.
4O-DS: seamless output card, maximum four output signal. Automatically recognize
output signal (HDMI/ DVI), and output resolution is adjustable. Output signal can
come from 4I-DS, or from other kinds of input cards. It supports off memory for
resolution, signal format, HDCP compliant status.
Note:
1. When 4O-DS works with input cards except 4I-DS, to ensure reliable seamless
output, adjust the input signals to any one of the following 5 resolutions:
1024x768, 1280x720, 1600x1200, 1920x1080, and 1920x1200.
2. Before using 4O-DS, upgrade the front-board and backboard of Modular Matrix
INPUTS INPUTS
DVI 1 DVI 2 DVI 3 DVI 4
SEAMLESS
DVI 1 DVI 2 DVI 3 DVI 4
SEAMLESS
OUTPU TS OUTPU TS

Modular Matrix Switcher 32x32
8
Switcher 32x32. Seek technical assistant from our technical supporters.
3. DVI interfaces on the signal card are same with the interfaces on 4I-DV& 4O-DV.
Pin C1~C5 are used in 4I-DS & 4O-DS.
When connecting to VGA, YPbPr or C-VIDEO signal, insert converting cables
according to specific pin definitions (see the figures below):
DVI- C-VIDEO:
Pin
Signal
C1
Yellow
C5
GND
Other pins are unused.
DVI- YPbPr:
Pin
Signal
Pin
Signal
C1
RED
C2
GREEN
C3
BLUE
C5
GND
Other pins are unused.
DVI- VGA (female):
Pin
Signal
Pin
Signal
C1
RED
C2
GND
C3
GREEN
C4
Horizontal Sync
Analog
8
Vertical Sync Analog
Other pins are unused.
2.2.3. 4I-HD & 4O-HD
HDMI signal card. (Please check the specification from 5.2.3)
It boasts embedded EDID management, and supports DDC. It’s also compliant with
DVI signal & HDCP.
4I-HD: input card, maximum four input signal. Input signal can pass to output device
through 4O-HD, or other kinds of output cards.
4O-HD: output card, maximum four output signal, output signals from 4I-HD, or
other kinds of input cards.

Modular Matrix Switcher 32x32
9
Pin layout of the HDMI connectors (female).
No.
Signal
No.
Signal
1
TMDS Data 2+
20
SHELL
2
TMDS Data 2
Shield
19
Hot Plug Detect
3
TMDS Data 2-
18
+5V Power
4
TMDS Data 1+
17
Ground
5
TMDS Data 1
Shield
16
DDC Data
6
TMDS Data 1-
15
DDC Clock
7
TMDS Data 0+
14
No Connect
8
TMDS Data 0
Shield
13
CEC
9
TMDS Data 0-
12
TMDS Clock-
10
TMDS Clock+
11
TMDS Clock
Shield

Modular Matrix Switcher 32x32
10
2.2.4. 4I-HS & 4O-HS
Seamless HDMI signal card with auxiliary audio port (Please check the specification
from 5.2.4)
It boasts seamless switch that provides real-time audio& video switching; support
HDMI1.3& HDCP1.2, compliant with DVI signal;
HDMI embeded audio and auxiliary stereo audio supports PCM format, audio
source selectable via designed command (default: HDMI embeded audio);
Built in scaler handles various resolution, output resolution adjustable via command.
4I-HS: input card, maximum four input signal. Input signal can pass to output device
through 4O-HS, or other kinds of output cards.
4O-HS: output card, maximum four output signal, output signals from 4I-HS, or other
kinds of input cards.
HDMI connectors of 4I-HS & 4O-HS are same with the 4I-HD & 4O-HD.
Note: When 4O-HS works with input cards except 4I-HS, to ensure reliable
seamless output, adjust all the input signals to the same designed resolution:
1024x768, 1280x720, 1600x1200, 1920x1080, or 1920x1200.
2.2.5. 4I-VG & 4O-VG
VGA signal card. (Please check the specification from 5.2.5)
Scale all inputs to 1080p or 1920x1200
The bandwidth is up to 350MHz (-3dB);
Input signal can be VGA (RGBHV), YPbPr, S-video, C-video or CVBS;
Output card only supports VGA output
4I-VG: input card, maximum four input signal, support VGA (RGBHV), YPbPr,
S-video, C-video& CVBS. Input signal can pass to output device through any kinds
of output cards.

Modular Matrix Switcher 32x32
11
4O-VG: output card, maximum four VGA output signal and 4 stereo audio outputs,
output video signal from 4I-VG, or other kinds of input cards, and output audio signal
from the audio of the input signal.
Pin layout of the VGA connectors (female):
Pin
Signal
Pin
Signal
1
RED
9
KEY/PWR
2
GREEN
10
GND
3
BLUE
11
ID0/RES
4
ID2/RES
12
ID1/SDA
5
GND
13
HSync
6
RED_RTN
14
VSync
7
GREEN_RTN
15
ID3/SCL
8
BLUE_RTN
When connecting to YPbPr or C-VIDEO signal, insert converting cables according to
specific pin definitions (see the figures below):
VGA- YPbPr:
Pin
Signal
Pin
Signal
1
RED
6
GND
2
GREEN
7
GND
3
BLUE
8
GND
Other pins are not used.
VGA- C-VIDEO:

Modular Matrix Switcher 32x32
12
Pin
Signal
Pin
Signal
1
RED
6
GND
7
GND
8
GND
Other pins are not used.
2.2.6. 4I-VA
VGA signal card. (Please check the specification from 5.2.6)
Scale all inputs to 1080p or 1920x1200;
Input signal can be VGA (RGBHV), YPbPr, S-video, C-video or CVBS;
4 stereo audio inputs.
4I-VA: input card, maximum four VGA inputs and four stereo audio inputs. Input
signal can pass to output device through any kinds of output cards.
The VGA connector and source connection are same with the 4I-VG.
2.2.7. 4I-SD & 4O-SD
SDI signal card. (Please check the specification from 5.2.7)
It is compatible with different SDI signal formats, including SD/HD/3G-SDI (adaptive)
Every port has loop output for local monitoring.
4I-SD: input card, maximum four input signal. Input signal can pass to output device
through 4O-SD, or other kinds of output cards.
4O-SD: output card, maximum four output signal, output signals from 4I-SD, or other
kinds of input cards.
The BNC connector is shown as the figure below.
INPUTS INPUTS
VGA 3
VGA 2
VGA 1 VGA 4
L R L R
1
2
3
4
SEAMLESS

Modular Matrix Switcher 32x32
13
2.2.8. 4I-SS
Seamless SDI signal card (Please check the specification from 5.2.8)
It is compatible with different SDI signal formats, including SD/HD/3G-SDI (adaptive),
support seamless transmission for high-definition signal up to 1080p;
Auto-detect input resolution and scale to 1080p@60Hz (default resolution,
adjustable via command);
Every port has loop output for local monitoring.
4I-SS: input card, maximum four input signal. Input signal can pass to output device
through 4O-SD, or other kinds of output cards.
BNC connectors are same with 4I-SD & 4O-SD’s.
2.2.9. 4I-TP & 4O-TP
Twisted pair card (HDMI/DVI extender). (Please check the specification from 5.2.9)
Support HDTV, compatible with HDMI1.3 and HDCP
4I-TP: input card, maximum input four HDMI TP signal. Input signal can pass to
output device through 4O-TP, or other kinds of output cards, need to work with
HDBT Transmitters.
4O-TP: output card, maximum output four HDMI TP signal, output signals from 4I-TP,
or other kinds of input cards, need to work with HDBT Receivers.
Sleeve ( )
Tip (+)
BNC Connector

Modular Matrix Switcher 32x32
14
How the indicators work:
Color
Definition
Status
Yellow
Power Indicator
Blink once powered on;
Turn off when there is no power.
Green
Link Indicator
Light when the port is connected with
CAT5e/6;
Turn off when there is no connection.
Pin layout of the HDBT connector:
Pin
Color
1
orange white
2
orange
3
green white
4
blue
5
blue white
6
green
7
brown white
8
brown
1st Group
4--5
2nd Group
1--2
3rd Group
3--6
4th Group
7--8
Notice: Cable connectors MUST be metal one, and the shielded layer of cable
MUST be connected to the connector’s metal shell, to well share the grounding.
2.2.10. 4I-UH & 4O-UH
4K HDMI signal card. (Please check the specification from 5.2.10)
Support HDMI 1.4a& HDCP 1.4 compliance; Compatible with DVI signal; Support
high-definition HDMI source up to 4kx2k, 1080p 3D compliance;
Provide auxiliary audio port as supplement to HDMI embedded audio, audio source
selectable via command “AUDIO[X]I[Z].”, [X] stands for output port, [Z] stands for
audio source (0 is for HDMI embedded audio, 1 is for analog audio)
It also boasts embedded EDID management.

Modular Matrix Switcher 32x32
15
4I-UH: input card, maximum four input signal. Input signal can pass to output device
through 4O-UH, or other kinds of output cards.
Note: When matching with output cards that do not support 4kx2k, adjust the input
resolution to 1080p to enable reliable output.
4O-UH: output card, maximum four output signal, output signals from 4I-UH, or
other kinds of input cards, HDCP compliant status settable via RS232 command
The HDMI connector is same with 4I-HD& 4O-HD’s.
2.2.11. 4I-UF & 4O-UF
4K optical signal card. (Please check the specification from 5.2.11)
Work with single-mode/ multi-mode module to realize long-distance optical fiber
transmission, support multi-mode transmission up to 300m and single mode
transmission up to 2km.
High bandwidth: 10.2Gbps; Compliant with HDMI 1.4, capable to transmit 4K×2K&
1080P 3D (max) signals;
4I-UF: input card with indicators, maximum four input signal, and corresponding
indicator illuminates green when there is input signal. Input signal can pass to output
device through 4O-UF, or pass through other kinds of output cards.
4O-UF: output card with indicators, maximum four output signal, output signals from
4I-UF, or other kinds of input cards; corresponding indicator illuminates green when
there is output signal.