wsm M7060 Instruction manual

M6060,M7060
WORKSHOP MANUAL
TRACTOR
KiSC issued 08, 2013 A

TO THE READER
This Workshop Manual tells the servicing personnel about the mechanism, servicing and
maintenance of the M6060 and M7060. It contains 4 parts: "Information", "General", "Mechanism"
and "Servicing".
Information
This section primarily contains information below.
• Safety First
• Safety Decal
• Specifications
• Dimensions
General
This section primarily contains information below.
• Engine Identification
• Model Identification
• General Precautions
• Maintenance Check List
• Check and Maintenance
• Special Tools
Mechanism
This section contains information on the structure and the function of the unit. Before you continue
with the subsequent sections, make sure that you read this section.
Refer to the latest version of Workshop Manual (Code No. 9Y021-01870 / 9Y021-18200) for the
diesel engine / tractor mechanism that this workshop manual does not include.
Servicing
This section primarily contains information below.
• Troubleshooting
• Servicing Specifications
• Tightening Torques
• Checking, Disassembling and Servicing
Regarding the servicing of Common Rail System (CRS), refer to "DIAGNOSIS MANUAL".
(9Y120-02440)
Regarding the servicing of Diesel Particulate Filter (DPF), refer to "DIESEL PARTICULATE FILTER
HANDLING MANUAL" (9Y111-08131).
All illustrations, photographs and specifications contained in this manual are of the newest
information available at the time of publication.
KUBOTA reserves the right to change all information at any time without notice.
Since this manual includes many models, information or illustrations and photographs can show
more than one model.
August, 2013
© KUBOTA Corporation 2013
KiSC issued 08, 2013 A

I INFORMATION
KiSC issued 08, 2013 A

CONTENTS
1. SAFETY FIRST .............................................................................................................................. I-1
2. SAFETY DECALS .......................................................................................................................... I-4
3. SPECIFICATIONS........................................................................................................................ I-10
4. TRAVELING SPEEDS.................................................................................................................. I-14
5. DIMENSIONS ............................................................................................................................... I-15
INFORMATION
KiSC issued 08, 2013 A

INFORMATION
M6060, M7060, WSM
I-1
1. SAFETY FIRST
WSM000001INI0001US0
BEFORE YOU START SERVICE
• Read all instructions and safety instructions in this
manual and on your machine safety decals.
• Clean the work area and machine.
• Park the machine on a stable and level ground, and
set the parking brake.
• Lower the implement to the ground.
• Stop the engine, then remove the key.
• Disconnect the battery negative cable.
• Hang a "DO NOT OPERATE" tag in the operator
station.
WSM000001INI0010US0
START SAFELY
• Do not do the procedures below when you start the
engine.
– short across starter terminals
– bypass the safety start switch
• Do not alter or remove any part of machine safety
system.
• Before you start the engine, make sure that all shift
levers are in neutral positions or in disengaged
positions.
• Do not start the engine when you stay on the ground.
Start the engine only from operator's seat.
WSM000001INI0015US0
SAFETY FIRST
• This symbol, the industry's "Safety Alert Symbol", is used throughout this manual and on labels on the
machine itself to warn of the possibility of personal injury. Read these instructions carefully.
• It is essential that you read the instructions and safety regulations before you try to repair or use this
unit.
DANGER
• Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury.
WARNING
• Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.
CAUTION
• Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate
injury.
IMPORTANT
• Indicates that equipment or property damage could result if instructions are not followed.
NOTE
• Gives helpful information.
KiSC issued 08, 2013 A

INFORMATION
M6060, M7060, WSM
I-2
OPERATE SAFELY
• Do not use the machine after you consume alcohol
or medication or when you are tired.
• Put on applicable clothing and safety equipment.
• Use applicable tools only. Do not use alternative
tools or parts.
• When 2 or more persons do servicing, make sure
that you do it safely.
• Do not operate below the machine that only a jack
holds. Always use a safety stand to hold the
machine.
• Do not touch the hot parts or parts that turn when the
engine operates.
• Do not remove the radiator cap when the engine
operates, or immediately after it stops. If not, hot
water can spout out from the radiator. Only remove
the radiator cap when it is at a sufficiently low
temperature to touch with bare hands. Slowly loosen
the cap to release the pressure before you remove it
fully.
• Released fluid (fuel or hydraulic oil) under pressure
can cause damage to the skin and cause serious
injury. Release the pressure before you disconnect
hydraulic or fuel lines. Tighten all connections before
you apply the pressure.
• Do not open a fuel system under high pressure.
The fluid under high pressure that stays in fuel lines
can cause serious injury. Do not disconnect or repair
the fuel lines, sensors, or any other components
between the fuel pump and injectors on engines with
a common rail fuel system under high pressure.
• Put on an applicable ear protective device (earmuffs
or earplugs) to prevent injury against loud noises.
• Be careful about electric shock. The engine
generates a high voltage of more than DC100 V in
the ECU and is applied to the injector.
WSM000001INI0012US0
PREVENT A FIRE
• Fuel is very flammable and explosive under some
conditions. Do not smoke or let flames or sparks in
your work area.
• To prevent sparks from an accidental short circuit,
always disconnect the battery negative cable first
and connect it last.
• The battery gas can cause an explosion. Keep the
sparks and open flame away from the top of battery,
especially when you charge the battery.
• Make sure that you do not spill fuel on the engine.
WSM000001INI0005US0
KiSC issued 08, 2013 A

INFORMATION
M6060, M7060, WSM
I-3
KEEP A GOOD AIRFLOW IN THE WORK AREA
• If the engine is in operation, make sure that the area
has good airflow. Do not operate the engine in a
closed area. The exhaust gas contains poisonous
carbon monoxide.
WSM000001INI0006US0
DISCARD FLUIDS CORRECTLY
• Do not discard fluids on the ground, down the drain,
into a stream, pond, or lake. Obey related
environmental protection regulations when you
discard oil, fuel, coolant, electrolyte and other
dangerous waste.
WSM000001INI0007US0
PREVENT ACID BURNS
• Keep electrolyte away from your eyes, hands and
clothing. Sulfuric acid in battery electrolyte is
poisonous and it can burn your skin and clothing and
cause blindness. If you spill electrolyte on yourself,
clean yourself with water, and get medical aid
immediately.
WSM000001INI0008US0
PREPARE FOR EMERGENCIES
• Keep a first aid kit and fire extinguisher ready at all
times.
• Keep the emergency contact telephone numbers
near your telephone at all times.
WSM000001INI0009US0
KiSC issued 08, 2013 A

INFORMATION
M6060, M7060, WSM
I-4
2. SAFETY DECALS
The following safety decals (pictorial safety labels) are installed on the machine. If a decal becomes
damaged, illegible or is not on the machine, replace it. The decal part number is listed in the parts list.
WSM000001INI0014US0
ROPS Model
9Y1210828INI0001US0
KiSC issued 08, 2013 A

INFORMATION
M6060, M7060, WSM
I-5
9Y1210828INI0002US0
KiSC issued 08, 2013 A

INFORMATION
M6060, M7060, WSM
I-6
9Y1210828INI0003US0
KiSC issued 08, 2013 A

INFORMATION
M6060, M7060, WSM
I-7
CABIN Model
9Y1210828INI0004US0
KiSC issued 08, 2013 A

INFORMATION
M6060, M7060, WSM
I-8
9Y1210828INI0005US0
KiSC issued 08, 2013 A

INFORMATION
M6060, M7060, WSM
I-9
9Y1210828INI0006US0
CARE OF PICTORIAL SAFETY LABELS
1. Keep pictorial safety labels clean and free from obstructing material.
2. Clean pictorial safety labels with soap and water, dry with a soft cloth.
3. Replace damaged or missing pictorial safety labels with new labels.
4. If a component with pictorial safety label(s) affixed is replaced with new part, make sure new label(s) is (are)
attached in the same location(s) as the replace component.
5. Mount new pictorial safety labels by applying on a clean dry surface and pressing any bubbles to outside edge.
9Y1210828INI0010US0
KiSC issued 08, 2013 A

INFORMATION
M6060, M7060, WSM
I-10
3. SPECIFICATIONS
ROPS Model
The company reserves the right to change the specifications without notice.
NOTE
• *1: Manufacture's estimate
*2: Cast iron disks available for wheels
*3: At lower link end with links horizontal.
*4: According to EN 15695-1: 2009
Model M6060 M7060 M6060-SPA M7060-SPA
4WD
Engine
Model V3307-CR-TE4
Type 4-cylinder in-line, Common Rail System, direct injection
Number of cylinders 4
Total displacement 3331 cm3(203 cu.in.)
Bore and stroke 94 × 120 mm (3.7 × 4.7 in.)
Rated speed 2400 min-1 (rpm)
Net power*147.3 kW (63.5 PS) 52.9 kW (71.9 PS) 47.3 kW (63.5 PS) 52.9 kW (71.9 PS)
Gross power*149.5 kW (67.3 PS) 55.4 kW (75.3 PS) 49.5 kW (67.3 PS) 55.4 kW (75.3 PS)
Maximum torque
230 N·m (23.5 kgf·m,
170 lbf·ft) /
1400 min-1 (rpm)
260 N·m (26.5 kgf·m,
192 lbf·ft) /
1400 min-1 (rpm)
230 N·m (23.5 kgf·m,
170 lbf·ft) /
1400 min-1 (rpm)
260 N·m (26.5 kgf·m,
192 lbf·ft) /
1400 min-1 (rpm)
Battery capacity 12 V, RC: 160 min, CCA: 900 A
Fuel tank capacity 70 L (18.5 U.S.gals, 15 Imp.gals)
Engine oil capacity 12 L (12.7 U.S.qts, 11 Imp.qts)
Coolant capacity 8 L (8.5 U.S.qts, 7.0 Imp.qts)
Dimensions
Overall length 3675 mm (144.7 in.)
Overall width (minimum tread) 1855 mm (73.03 in.) 1965 mm (77.36 in.)
Overall height 2515 mm (99.02 in.) 2455 mm (96.65 in.)
Wheel base 2110 mm (83.07 in.)
Tread Front 1450 to 1540 mm (57.09 to 60.63 in.) 1365 to 1415 mm (53.74 to 55.71 in.)
Rear 1415 to 1735 mm (55.71 to 68.31 in.) 1545 to 1740 mm (60.83 to 68.30 in.)
Minimum ground clearance 400 mm (15.7 in.) 340 mm (13.4 in.)
Weight 2490 kg (5490 lbs) 2420 kg (5335 lbs)
Traveling
system
Standard tire
size
Front tire 320/85R30 320/70R20
Rear tire *2 420/85R30 (16.9-30) 420/70R28
Clutch Hydraulic multiple wet disks
Steering Hydraulic power steering
Braking system Hydraulically operated wet disks
Trailer brake Hydraulic
Trailer brake couple ISO 5676
Differential Bevel gears with differential lock (Rear)
Hydraulic
system
Hydraulic control system Position, draft (top link sensing) and mix control
Pump capacity 61.5 L (16.2 U.S.gals, 13.5 Imp.gals) /min
3-point hitch SAE Category 1 and 2
Max. lifting
force
At lifting
points*32300 kg (5071 lbs)
Remote hydraulic control 2 standard (3rd and flow control valve optional)
Remote control valve coupler ISO 7241-1 standards "A"
System pressure 19.1 MPa (195 kgf/cm2, 2770 psi)
Traction system Swinging drawbar, adjustable in direction
PTO Live PTO
(Independent)
Direction of
turning Clockwise, viewed from tractor rear
PTO speed 6 spline: 540 min-1 (rpm) / 2160 min-1 (rpm) engine speed
6 spline: 540E min-1 (rpm) / 1828 min-1 (rpm) engine speed
The level of protection against hazardous
substance *4 Category 1
KiSC issued 08, 2013 A

INFORMATION
M6060, M7060, WSM
I-11
The company reserves the right to change the specifications without notice.
NOTE
• *5: Measured according to Directive 2009/76/EC
*6: Measured according to Directive 2009/63/EC
*7: Measured according to Directive 78/764/EEC
9Y1210828INI0007US0
Model M6060 M7060 M6060-SPA M7060-SPA
4WD
Noise at the operator's ear *5 85.3 dB (A)
Noise of the tractor in motion *6 90 dB (A)
Value of the
vibration
level *7
Grammer
MSG95A/ 721
Light driver 1.24 m/s2(124 cm/s2, 0.126 G)
Heavy driver 1.1 m/s2(110 cm/s2, 0.11 G)
Grammer
DS44/1HB
Light driver 1.04 m/s2(104 cm/s2, 0.106 G)
Heavy driver 0.83 m/s2(83 cm/s2, 0.085 G)
KAB11/E6 Light driver 1.19 m/s2(119 cm/s2, 0.121 G)
Heavy driver 0.90 m/s2(90 cm/s2, 0.092 G)
KAB15/E6 Light driver 1.09 m/s2(109 cm/s2, 0.111 G)
Heavy driver 0.90 m/s2(90 cm/s2, 0.092 G)
KiSC issued 08, 2013 A

INFORMATION
M6060, M7060, WSM
I-12
CABIN Model
The company reserves the right to change the specifications without notice.
NOTE
• *1: Manufacture's estimate
*2: At lower link end with links horizontal.
*3: At lower link end with links horizontal.
*4: According to EN 15695-1: 2009
Model M6060 M7060 M7060-SPA
4WD
Engine
Model V3307-CR-TE4
Type 4-cylinder in-line, Common Rail System, direct injection
Number of cylinders 4
Total displacement 3331 cm3(203 cu.in.)
Bore and stroke 94 × 120 mm (3.7 × 4.7 in.)
Rated speed 2400 min-1 (rpm)
Net power*147.3 kW (64.3 PS) 52.9 kW (71.9 PS)
Gross power*149.5 kW (67.3 PS) 55.4 kW (75.3 PS)
Maximum torque
229 N·m (23.4 kgf·m,
169 lbf·ft) /
1400 min-1 (rpm)
258 N·m (26.3 kgf·m, 190 lbf·ft) / 1400 min-1 (rpm)
Battery capacity 12 V, RC: 160 min, CCA: 900 A
Fuel tank capacity 90 L (24 U.S.gals, 20 Imp.gals)
Engine oil capacity 12 L (12.7 U.S.qts, 11 Imp.qts)
Coolant capacity 8 L (8.5 U.S.qts, 7 Imp.qts)
Dimensions
Overall length 3675 mm (144.7 in.)
Overall width (minimum tread) 1855 mm (73.03 in.) 1965 mm (77.36 in.)
Overall height 2580 mm (101.6 in.) 2520 mm (99.21 in.)
Wheel base 2110 mm (83.07 in.)
Tread
Front 1450 to 1540 mm (57.09 to 60.63 in.) 1365 to 1415 mm
(53.74 to 55.71 in.)
Rear 1415 to 1735 mm (55.71 to 68.31 in.) 1545 to 1740 mm
(60.83 to 68.30 in.)
Minimum ground clearance 390 mm (15.4 in.) 330 mm (13.0 in.)
Weight 2725 kg (6008 lbs) 2655 kg (5853 lbs)
Traveling
system
Standard tire
size
Front tire 320/85R20 320/70R20
Rear tire *2 420/85R30 (16.9-30) 420/70R28
Clutch Hydraulic multiple wet disks
Steering Hydraulic power steering
Braking system Hydraulically operated wet disks
Trailer brake Hydraulic
Trailer brake couple ISO 5676
Differential Bevel gears with differential lock (Rear)
Hydraulic
system
Hydraulic control system Position, draft (top link sensing) and mix control
Pump capacity 61.5 L (16.2 U.S.gals, 13.5 Imp.gals) /min
3-point hitch SAE Category 1 and 2
Max. lifting
force
At lifting
points*32300 kg (5071 lbs)
Remote hydraulic control 2 standard (3rd and flow control valve optional)
Remote control valve coupler ISO 7241-1 standards "A"
System pressure 19.1 MPa (195 kgf/cm2, 2770 psi)
Traction system Swinging drawbar, adjustable in direction
PTO Live PTO
(Independent)
Direction of
turning Clockwise, viewed from tractor rear
PTO speed 6 spline: 540 min-1 (rpm) / 2160 min-1 (rpm) engine speed
6 spline: 540E min-1 (rpm) / 1828 min-1 (rpm) engine speed
The level of protection against hazardous
substance *4 Category 1
KiSC issued 08, 2013 A

INFORMATION
M6060, M7060, WSM
I-13
The company reserves the right to change the specifications without notice.
NOTE
• *5: Measured according to Directive 2009/76/EC
*6: Measured according to Directive 2009/63/EC
*7: Measured according to Directive 78/764/EEC
9Y1210828INI0008US0
Model M6060 M7060 M7060-SPA
4WD
Noise at the
operator's
ear *5
CAB/door closed 78.9 dB (A)
CAB/door closed 80.3 dB (A)
Noise of the tractor in motion *6 80 dB (A)
Value of the
vibration
level *7
Grammer
MSG95A/721
Light driver 1.24 m/s2(124 cm/s2, 0.126 G)
Heavy driver 1.1 m/s2(110 cm/s2, 0.11 G)
Grammer
DS85H/90
Light driver 1.24 m/s2(124 cm/s2, 0.126 G)
Heavy driver 0.98 m/s2(98 cm/s2, 0.10 G)
KAB 11/E6 Light driver 1.19 m/s2(119 cm/s2, 0.12 G)
Heavy driver 0.90 m/s2(90 cm/s2, 0.092 G)
KAB 15/E6 Light driver 1.09 m/s2(109 cm/s2, 0.111 G)
Heavy driver 0.90 m/s2(90 cm/s2, 0.092 G)
Sears 3045 Light driver 1.20 m/s2(120 cm/s2, 0.122 G)
Heavy driver 1.12 m/s2(112 cm/s2, 0.114 G)
KiSC issued 08, 2013 A

INFORMATION
M6060, M7060, WSM
I-14
4. TRAVELING SPEEDS
(At rated engine rpm)
The company reserves the right to change the specifications without notice.
9Y1210828INI0009US0
Model M6060 / M7060 M6060-SPA / M7060-SPA
Tire size (Rear) 420/85R30 (16.9-30) 420/70R28
Shuttle shift
lever
Range gear
shift lever
Main gear shift
lever km/h (mph) km/h (mph)
Forward
CREEP
1 0.4 (0.2) 0.4 (0.2)
2 0.6 (0.4) 0.6 (0.4)
3 0.8 (0.5) 0.7 (0.4)
4 1.0 (0.62) 0.9 (0.6)
5 1.3 (0.81) 1.2 (0.75)
6 1.7 (1.1) 1.6 (0.99)
L
1 2.6 (1.6) 2.4 (1.5)
2 3.7 (2.3) 3.3 (2.0)
3 4.7 (2.9) 4.3 (2.7)
4 6.1 (3.8) 5.5 (3.4)
5 7.7 (4.8) 7.1 (4.4)
6 10.2 (6.34) 9.4 (5.8)
H
1 12.3 (7.64) 11.3 (7.02)
2 17.4 (10.8) 16.0 (9.94)
3 22.5 (14.0) 20.6 (12.8)
4 28.9 (18.0) 26.4 (16.4)
5 37.0 (17.7) 33.9 (21.1)
6 39.9 (*1) (24.8) 36.5 (*1) (22.7)
Reverse
CREEP
1 0.4 (0.2) 0.4 (0.2)
2 0.6 (0.4) 0.6 (0.4)
3 0.8 (0.5) 0.7 (0.4)
4 1.0 (0.62) 0.9 (0.6)
5 1.3 (0.81) 1.2 (0.75)
6 1.7 (1.1) 1.6 (0.99)
L
1 2.5 (1.6) 2.3 (1.4)
2 3.6 (2.2) 3.3 (2.0)
3 4.6 (2.9) 4.3 (2.7)
4 5.9 (3.7) 5.4 (3.4)
5 7.6 (4.7) 7.0 (4.3)
6 10.1 (6.28) 9.2 (5.7)
H
1 12.1 (7.52) 11.1 (6.90)
2 17.1 (10.6) 15.7 (9.76)
3 22.2 (13.8) 20.3 (12.6)
4 28.4 (17.6) 26.0 (16.2)
5 36.3 (22.6) 33.3 (20.7)
6 39.2 (*1) (24.4) 35.9 (*1) (22.3)
KiSC issued 08, 2013 A

INFORMATION
M6060, M7060, WSM
I-15
5. DIMENSIONS
ROPS Model
9Y1210828INI0011US0
KiSC issued 08, 2013 A

INFORMATION
M6060, M7060, WSM
I-16
CABIN Model
9Y1210828INI0012US0
KiSC issued 08, 2013 A