
ma_K0200084_STUDIO_Private_Line_Gegenkasten_klein_DE_GB • © 02/2014 • Wilh. Schlechtendahl & Söhne GmbH & Co. KG
Assembly Instruction
STUDIO – Private Line, Strike Box small
Suitable for 8 to 10mm glass thickness.
Part Specification
1strike box
2clamping plate with stop
3fixing screw M8x32,5
4clamp screw M8x23
5plug
6isolation sleeve
Assembly
ATTENTION! Glass and gaskets have to be
dust- and grease free – if necessary, please clean
with standard glass cleaner.
Slide isolation sleeve 6on entire fixing screw 3.
Screw both fixing screws 3evenly into clamping
plate 2and keep a distance of approx. 8 or 10mm
(according to glass thickness) between strike box 1
and clamping plate 2in order to secure the strike
box to the glass using clamp screws 4. If it is not
possible to screw the clamp screws 4or if the
strike box slips, readjust the fixing screws 3.
Press plug 5into the bore hole for the clamp
screws.
STUDIO – Private Line, Strike Box small
Assembly Instruction
A
Wilh. Schlechtendahl & Söhne GmbH & Co. KG Hauptstraße 18–32 42579 Heiligenhaus Postfach 10 05 52/62
42570 Heiligenhaus Telefon: +49 (0) 20 56/17-0 Fax: +49 (0) 20 56/51 42 www.wss.de wss@wss.de
1
2
3
5
4
6