Wyndham Collection WC-1414-48 Service manual

WC-1414-48
Installation Guide
Prior to installation please check received
Please report any missing items to your
Protect all surfaces from sharp objects,
high heat sources, direct prolonged
sunlight and chemical hazards.
Professionalinstallation recommended.
●
●
●
items against the "Packing List".
retailer immediately .
0
1
234
12300mm
"-
CHN
REQUIRED TOOLS NOT IN BOX
Tape measure Pencil Electric Drill Phillips Screwdriver Adjustable Wrench Spirit Level Silicone sealant
adjust laterally adjust depth
adjust height
Counter & sink / 1
PACKING LIST
Main cabinet / 1 Screws for mirror 2/
Mirror / 1 (may not be
included)
(Not all components may be included,depending upon your purchase)
HOW TO ADJUST HINGES (if required)

WC-1414-48
Installation Guide
6-8mm
45
INSTALLATION INSTRUCTIONS
Installer must cut appropriately sized hole
in back of cabinet to accommodate existing
placement of hot & cold wall valves and drains.
1
2
Install the counter. Seal around
the top of the cabinet with clear silicone
sealant.
3
(1)
(2)
(3)
6
Install the mirror: use a pencil to mark the
placement of the screw holes on the wall,drill
the holes and insert the plastic wall anchors.
Install the screws into the wall anchors,
leaving enough of the screw exposed to hang
the mirror - approx 1/4" - 1/2".
Remove the handles from
inside the cabinet doors and drawers and
reinstall on the outside.Do not over-tighten
when reattaching.
Cut hole in back
of cabinet
Adjust the feet if needed.