X-Stand X-1 MINI Quick guide

X-1 MINI
This X-Stand™ product(s) has been tested to rigid industry standards. Safe operation and use
of this X-Stand™ product(s) is the responsibility of the user(s). Please read and follow all safe
use instructions and warnings. Failure to follow these may result in serious injury or death!
First Edition, January 2017, Published by X-Stand™ TREESTANDS, Apple Valley Minnesota.
© 2017 X-Stand™ TREESTANDS. All rights reserved.

READTHIS MANUAL IN ITS ENTIRETY PRIOR TO USINGTHIS PRODUCT.
This instruction manual complies with the ASTM F2123 - Standard Practice for Treestand Instructions.
2
ATTENTION!! WHEN YOUSEE A “ WARNING!” BE SURE TO HEED THEMESSAGE!
THE INFORMATION CONTAINED IN THESE MESSAGES CAN SAVE YOUR LIFE!!
Max. Weight Capacity (User(s) and Equipment) 250 lbs (114 kg)
XSCT306 - X-1 MINI
CLIMBING TREESTAND SAFE USAGE INSTRUCTIONS & WARNINGS
WARNING! This product carries strict weight restrictions. Please note that these
weight limitations include the user(s) and their equipment. DO NOT use these product(s)
if you exceed these total weight limitations. Failure to follow these instructions may result
in serious injury or death!
Thank you for your purchase of this quality X-Stand™ Treestands product. To ensure
your personal safety, please take a moment to carefully read this Instruction Manual
in its entirety before attempting to assemble, set-up, install and/or otherwise use this
X-Stand™ Treestands product. Failure to follow these instructions may result in serious
injury or death!
Should you have any questions about the installation and/or use of this product, or any
other X-Stand™ Treestands product(s) do not hesitate to call one of our customer
service representatives at 540-877-2769 or visit X-Stand™ Treestands online at
X-Stand.com. Our customer service representatives will answer any questions you may
have about any of the complete line of X-Stand™ Treestands products.
Do not return this product to the retailer if you have any damaged or missing parts. Call
X-Stand™ Treestands for replacement of any damaged or missing parts at 540-877-
2769.
WARNING! Failure to read and strictly comply with the instructions contained in this
Instruction Manual may result in serious injury or death!
WARNING! FALLS FROM A TREESTAND CAN OCCUR ANYTIME AFTER LEAVING THE
GROUND. THESE FALLS COULD RESULT IN EITHER SERIOUS INJURY OR DEATH! FOR
YOUR PERSONAL SAFETY, PLEASE TAKE A MOMENT TO CAREFULLY READ THIS PRODUCT
INSTRUCTION MANUAL IN ITS ENTIRETY BEFORE ATTEMPTING TO ASSEMBLE, SET-UP,
INSTALL AND/OR OTHERWISE USE THIS X-STAND™ PRODUCT. AT LEAST ANNUALLY,
REVIEW THE CONTENTS OF THIS INSTRUCTION MANUAL AND WATCH THE SAFE
TREESTAND HUNTING DVD. ADDITIONALLY, KEEP THESE INSTRUCTIONS FOR THE ENTIRE
DURATION THAT YOU OWN THIS PRODUCT(S). FAILURE TO FOLLOW THESE INSTRUCTIONS
MAY RESULT IN SERIOUS INJURY OR DEATH!
WARNING! A Treestand Safety:It’s Up To You DVD has been included with this
treestand. Please view it in its entirety prior to using this or any other X-Stand™
product(s). Failure to follow these instructions may result in serious injury or death!
WARNING! THE SAFE USE AND OPERATION OF THIS PRODUCT IS THE SOLE
RESPONSIBILITY OF THE USER. IT IS ALSO THE SOLE RESPONSIBILITY OF THE OWNER
TO PROVIDE ANY PERSON(S) WHO BORROW OR PURCHASE THIS PRODUCT WITH THESE
INSTRUCTIONS AND THE AFORE MENTIONED TREESTAND SAFETY: IT’S UP TO YOU
DVD. FAILURE TO FOLLOW THESE INSTRUCTIONS MAY RESULT IN SERIOUS INJURY OR
DEATH! ADDITIONALLY, FAILURE TO FOLLOW THIS INSTRUCTION MAY SUBJECT YOU TO
PERSONAL LIABILITY PENALTIES AS DETERMINED BY THE U.S. JUDICIAL SYSTEM.
WARNING! Prior to each hunt, you must inform someone of your hunting location,
Failure to follow these instructions may result in serious injury or death!
WARNING! Prior to each hunt, make sure that you have a signaling device (e.g.,
possession and in an operable condition. This device must be within easy access should
you experience the need to contact emergency assistance. Failure to follow these
instructions may result in serious injury or death!
WARNING! DO NOT remove, modify, and/or omit any portion or otherwise
mechanically modify this X-Stand™ product(s) or its assemblies in any manner.
tion, misuse, and/or part substitution shall immediately void your factory
warranty and may result in serious injury or death! If you suspect that a part(s) is missing
and/or defective, immediately contact X-Stand™ at 540-877-2769 for replacement of
missing or defective parts. Never modify your stand in any way by making repairs, or
altering, adding or attaching anything to it except if explicitly authorized in writing by X-
Stand™. ALWAYS USE GENUINE FACTORY AUTHORIZED X-STAND™ REPLACEMENT
PARTS. USE OF ANY REPLACEMENT PARTS OTHER THAN GENUINE X-STAND™
PARTS VOIDS YOUR WARRANTY AND MAY RESULT IN SERIOUS INJURY OR DEATH!
WARNING! ALWAYS inspect/check ALL expiration dates/tags on all straps and the
full-body fall arrest harness and its components prior to each use. You must replace ALL
straps and suspension seats EVERY year. Never use any strap(s) or full-body fall arrest
harness or its components that has expired and/or is showing any signs of damage and/
or wear. Failure to follow these instructions may result in serious injury or death!
WARNING! Make certain all chains, cables, straps, etc. are tightened per this
Instruction Manual prior to use. All treestand contact points must be in contact with the
tree before you step onto the stand. The correct adjustment and tightening of attachment
hardware is critical to the stable installation of this treestand. Additionally, you MUST
be wearing your Fall Arrest System (FAS) which includes a full-body fall arrest harness,
tree belt, lanyard/tether, suspension relief device and climbing belt/lineman’s belt (as
applicable) in accordance with the Instructions contained in this Instruction Manual.
Failure to follow these instructions may result in serious injury or death!
WARNING! This product(s) is designed for adult use only. No one under the age of
16 should attempt to use this or any other X-Stand™ product(s) without direct adult
supervision. Failure to follow these instructions may result in serious injury or death!
WARNING! Prior to attempting to use this or any other X-Stand™ product(s) you
must take a moment and become familiar with its assembly, setup and installation.
You must practice installing, setting-up and using your full-body fall arrest harness
and its components (i.e., lanyard/tether, tree belt, suspension relief device, climbing
belt/lineman’s belt [as applicable]) at ground-level prior to attempting to use it at heights
above ground-level. Once you have become thoroughly knowledgeable and comfortable
with this X-Stand™ product(s) setup, installation and use at ground-level, you are now
ready to use it at heights above ground-level. Failure to follow these instructions may
result in serious injury or death!
WARNING! Several X-Stand™ Treestands are equipped with a footrest, armrests and/
or shooting rail. Neither the footrest, armrests nor the shooting rail have been designed to
(15) lbs (6 kg) of weight on these structures. Doing so will put the user in serious risk of
injury or death. Failure to follow these instructions may result in serious injury or death!
WARNING! You must wear a Fall Arrest System (FAS) comprising of a full-body fall
arrest harness, tree belt, lanyard, suspension relief device and climbing belt/ lineman’s
belt (as applicable) at all times after leaving the ground. You must stay connected at all
and chest harnesses are no longer allowed and should never be used. If you are not
wearing a full-body fall arrest harness that is properly attached to the tree to protect you
from a fall, do not leave the ground nor attempt to enter your treestand. Failure to follow
these instructions may result in serious injury or death!
WARNING! Never attempt to climb up or down with a weapon and/or gear in your
possession. ALWAYS unload your weapon and pull it up to hunting height using a tether
or pull up rope. ALWAYS lower your unloaded weapon down to the ground prior (when
the ground) to attempting to climb up or climb down. Use this same method when raising
or lowering all other gear. Failure to follow these instructions may result in serious injury
or death!

READ THIS MANUAL IN ITS ENTIRETY PRIOR TO USINGTHIS PRODUCT. 
ATTENTION!! WHEN YOUSEE A “ WARNING!” BE SURE TO HEED THEMESSAGE!
THE INFORMATION CONTAINED IN THESE MESSAGES CAN SAVE YOUR LIFE!!
WARNING! Prior to each use thoroughly inspect the treestand and all of its related
components and all safety devices before use for signs of wear, rot, corrosion, cracks,
deterioration and/or any other type of defect. Make certain that your treestand is tight
and secure prior to use. Protect this product from extended exposure to direct sunlight,
excessive heat or freezing temperatures by storing inside when not in use. DO NOT
use this or any other product(s) if it shows evidence of wear, rot, corrosion, cracks,
deterioration and/or any other type of defect. Failure to follow these instructions may
result in serious injury or death!
WARNING! DO NOT use this or any other X-Stand™ product(s) if you have a history
of heart problems, back problems, impaired vision, joints that lock-up, spinal fusions,
equilibrium problems, high blood pressure, are not well-rested and/or any other physical
impairment that may limit your ability to use and/or operate this product(s) in the safe
manner outlined in this Instruction Manual. Additionally, do not use this or any other X-
Stand™ product(s) if you are currently taking medication (including prescription) and/or
using and/or consuming any substance, including alcohol, that may limit your ability to
use this X-Stand™ product(s) as outlined and described in the Instruction Manual. Never
use a treestand when feeling ill, nauseous or dizzy. Failure to follow these instructions
may result in serious injury or death!
WARNING! DO NOT attempt to make adjustments to this product while in the
treestand. All adjustments must be made with the entire treestand on the ground. Failure
to follow these instructions may result in serious injury or death!
WARNING! DO NOT leave your X-Stand™ product(s) installed for more than two
weeks (14 days). Any number of factors can jeopardize its installation and integrity. These
include, but are not limited to, weather or other environmental factors that can negatively
affect its performance. Animals can also cause damage to your X-Stand™ product(s)
that can negatively affect its performance and your safety. Additionally, factors such as
tree growth can stress and damage supporting straps, cables, chains and/or buckles.
Failure to follow these instructions may result in serious injury or death!
WARNING! ALWAYS inspect the treestand and all safety devices prior to each use. DO
NOT use this product(s) if it shows signs of wear, damage, deterioration, or vandalism.
Factors such as tree growth, vandals, weather and animals may affect the performance of
an unattended treestand. Failure to follow these instructions may result in serious injury
or death!
WARNING! DO NOT
in any way. Also, do not attach anything to your treestand without explicit authorized and
written instructions from the manufacturer. Failure to follow these instructions shall void
warranty and may result in serious injury or death!
WARNING! Strict weight limitations have been set for each product to ensure your
personal safety. Note the weight limitations of your stand and that this weight limit
includes the user (one person) and their equipment. NEVER EXCEED THESE WEIGHT
LIMITATIONS! Failure to follow these instructions may result in serious injury or death!
WARNING! DO NOT attempt to use this or any other X-Stand™ product(s) when ice,
snow, and/or freezing rain has deposited or formed on any portion of the tree or stand
you intend to climb. Do not attempt to use this or any other X-Stand™ product(s) when
use this or any other X-Stand™ product(s) when any other adverse weather condition
presents itself. These include, but are not limited to, weather conditions which have the
potential for producing winds, lightning, rain, snow, sleet and/or any other atmospheric
condition which may limit the user’s ability to operate this X-Stand™ product(s) in a safe
manner as described in this Instruction Manual. Should inclement weather conditions
arise during your use of this X-Stand™ product(s), return to the ground immediately.
Failure to follow these instructions may result in serious injury or death!
WARNING! BEFORE each use, make sure all nuts and bolts are secure. CHECK all
hardware and webbing prior to every use to make sure that no damage has occurred
to hardware and that webbing (as applicable) is not cut or frayed. Keep webbing from
coming into contact with any sharp edges. DO NOT USE THIS PRODUCT IF ANY DAMAGE
IS SUSPECTED. Failure to follow these instructions may result in serious injury or death!
WARNING! REPLACE any damaged or worn part with original parts. Replace
attachment straps every year and when not in use store in a dry, cool, safe place
away from sunlight. Never store a treestand or any of its components outdoors when not
in use. To purchase parts contact X-Stand™ Treestands at 540-877-2769. Failure to
follow these instructions may result in serious injury or death!
WARNING! Always wear the appropriate foot wear when using a treestand. A good
non-slip safety boot is important for your safety. Be especially careful that boot laces
do not get hooked on the tree stand or its components (tuck shoelaces into boot before
climbing). Failure to follow these instructions may result in serious injury or death!
WARNING! DO NOT use this product, or attempt to use a treestand, on a dead,
trees, or utility poles. DO NOT use this product on any tree that does not allow for a level
standing platform. Failure to follow these instructions may result in serious injury or
death!
WARNING! NEVER hunt out of a treestand at heights at which you are not completely
comfortable. Depending upon the tree and hunting conditions, choose the minimum
hunting height that allows for safe, effective hunting. Failure to follow these instructions
may result in serious injury or death!
WARNING! DO NOT use this, or any other X-Stand™ product(s) to climb utility poles,
telephone poles, structural columns or any other man-made structures. Never use this or
any other X-Stand™ product(s) around power generation (e.g., transformers, generators,
substations, etc.) and/or power transmission equipment. Never use a treestand on a
dead, leaning, diseased or loose barked tree. NEVER USE A TREE BRANCH, OR ANY
PORTION OF A TREE, TO SUPPORT ANY PORTION OF YOUR WEIGHT OR AS A HAND
HOLD. Failure to follow these instructions may result in serious injury or death!
WARNING! DO NOT stand on the treestand seat. Failure to follow these instructions
may result in serious injury or death!
WARNING! This X-Stand™ Treestand product(s) was designed for installation on
trees with a minimum diameter of nine (9) inches (23 cm) to maximum diameter of
twenty (18) inches (51 cm) at treestand installation height (i.e., seat height). DO NOT use
your X-Stand product(s) on trees with trunk diameters that do not meet these diameter
requirements. Failure to follow these instructions may result in serious injury or death!
WARNING! Never attempt to hunt from an unlevel standing and/or seating platform.
Additionally, NEVER attempt to level your standing and/or seating platform at heights
above the ground. Failure to follow these instructions may result in serious injury or
death!
WARNING! DO not over tighten the hardware. Over tightening can lead to structural
damage and may negatively affect the performance of your stand. Failure to follow these
instructions may result in serious injury or death!
WARNING! Prior to stepping onto the treestand, connect the full-body fall arrest har-
ness tether to the tree trunk at about eye-level. Failure to follow these instructions may
result in serious injury or death!
WARNING! NEVER adjust the length of cable or level of the platform when above
ground-level. All adjustments must be made at ground-level. Failure to follow these
instructions may result in serious injury or death!
WARNING! After descending back to the ground, do not remove the full-body fall
arrest harness tether from the tree trunk until you have reached the ground and your feet
or death!
3
This instruction manual complies with the ASTM F2123 - Standard Practice for Treestand Instructions.

READTHIS MANUAL IN ITS ENTIRETY PRIOR TO USINGTHIS PRODUCT.
This instruction manual complies with ASTM F2337 Standard Test Method for Treestand Fall Arrest Systems.

ATTENTION!! WHEN YOUSEE A “ WARNING!” BE SURE TO HEED THEMESSAGE!
THE INFORMATION CONTAINED IN THESE MESSAGES CAN SAVE YOUR LIFE!!
FULL-BODY FALL ARREST HARNESS USAGE INSTRUCTIONS & WARNINGS
FULL-BODYFALLARREST HARNESS INSTRUCTIONS
WARNING! READ THESE X-STAND™ TREESTANDS FULL-BODY FALL ARREST HARNESS INSTRUCTIONS CAREFULLY AND FOLLOW ALL THE INSTRUCTIONS! YOUR NEW FULL-BODY
FALL ARREST HARNESS IS DESIGNED FOR A MAXIMUM CAPACITY (USER & EQUIPMENT) OF 300 POUNDS (136 KG). ADDITIONALLY, YOUR NEW FULL-BODY FALL ARREST HARNESS
MUST BE REPLACED AFTER THREE (3) YEARS OF SERVICE! REPLACE YOUR HARNESS IMMEDIATELY SHOULD YOU EXPERIENCE A FALL WHILE WEARING IT.
WARNING! You must use the X-Stand™ Treestand full-body fall arrest harness provided with this product or a harness that complies with ASTM standards.NOTE: You must store
your full-body fall arrest harness out of direct sunlight and out of any other harsh environmental condition(s) that may adversely affect its performance. Failure to follow these
instructions may result in serious injury or death!
WARNING! Failure to read and strictly comply with the instructions contained here
may result in serious injury or death!
WARNING! READ ALL THE INFORMATION INCLUDED HERE PRIOR TO ATTEMPTING TO
USE THIS FULL-BODY FALL ARREST HARNESS AND ITS COMPONENTS. YOUR FULL-BODY
FALL ARREST HARNESS AND ITS COMPONENTS ARE DESIGNED FOR A MAXIMUM WEIGHT
CAPACITY (USER AND EQUIPMENT) OF 300 POUNDS (136 KG). ADDITIONALLY, YOUR
FULL BODY FALL ARREST HARNESS AND ITS COMPONENTS MUST BE REPLACED AFTER
THREE (3) YEARS OF SERVICE!
WARNING! Prior to attempting to use this or any other X-Stand™ product(s) you
must take a moment and become familiar with its assembly, setup and installation. You
must practice installing, setting-up and using your full-body fall arrest harness at ground-
level prior to attempting to use it at heights above ground-level. Once you have become
thoroughly knowledgeable and comfortable with this product(s) setup, installation and
use at ground-level, you are now ready to use it at heights above ground-level. Failure to
follow these instructions may result in serious injury or death!
WARNING! You must wear a Fall Arrest System (FAS) comprising of a full-body fall
arrest harness, tree belt, lanyard, suspension relief device and climbing belt/lineman’s
belt (as applicable) at all times after leaving the ground. You must stay connected at all
treestands. Single safety belts
and chest harnesses are no longer allowed and should never be used. If you are not
wearing a full-body fall arrest harness, do not leave the ground. Failure to follow these
instructions may result in serious injury or death!
WARNING! ALWAYS practice using your full-body fall arrest harness (FAS) in the
presence of a responsible adult prior to using it in an elevated hunting environment,
and learn what it feels like to hang suspended in the harness at ground level. Practice
installing and using your treestand at ground level and with a responsible adult present
before you go hunting.
WARNING! The length of the full-body fall arrest harness tether must be kept to
a minimum at all times during use. It should be adjusted so that it is above the head
with no slack (snug) in the sitting position. Never allow the full-body fall arrest tether
to get under your chin, around your neck, or under your arm(s). Failure to follow these
instructions may result in serious injury or death!
WARNING! Should you experience a fall there is time to make a correct decision on
what action needs to take place. It is important to remember: DO NOT PANIC! Failure to
follow this warning may result in serious injury or death!
WARNING! If you have a limiting physical and/or health condition that precludes and/
or renders you incapable of self-recovery and/or a suitable escape plan is not available,
DO NOT hunt from heights above ground-level. Failure to follow these instructions may
result in serious injury or death!
WARNING! FALLS FROM A TREESTAND CAN OCCUR ANYTIME AFTER LEAVING THE
GROUND. THESE FALLS COULD RESULT IN EITHER SERIOUS INJURY OR DEATH! FOR
YOUR PERSONAL SAFETY, PLEASE TAKE A MOMENT TO CAREFULLY READ THIS PRODUCT
INSTRUCTION MANUAL IN ITS ENTIRETY BEFORE ATTEMPTING TO ASSEMBLE, SET-UP,
INSTALL AND/OR OTHERWISE USE THIS X-STAND™ PRODUCT. AT LEAST ANNUALLY,
REVIEW THE CONTENTS OF THIS INSTRUCTION MANUAL AND WATCH THE SAFE
TREESTAND HUNTING DVD. ADDITIONALLY, KEEP THESE INSTRUCTIONS FOR THE ENTIRE
DURATION THAT YOU OWN THIS PRODUCT(S). FAILURE TO FOLLOW THESE INSTRUCTIONS
MAY RESULT IN SERIOUS INJURY OR DEATH!
WARNING! THE SAFE USE AND OPERATION OF THIS PRODUCT IS THE SOLE
RESPONSIBILITY OF THE USER. IT IS ALSO THE SOLE RESPONSIBILITY OF THE OWNER
TO PROVIDE ANY PERSON(S) WHO BORROW OR PURCHASE THIS PRODUCT FROM THEM
WITH THESE COMPLETE INSTRUCTIONS. FAILURE TO FOLLOW THESE INSTRUCTIONS
MAY RESULT IN SERIOUS INJURY OR DEATH! ADDITIONALLY, FAILURE TO FOLLOW THESE
INSTRUCTIONS MAY SUBJECT YOU TO PERSONAL LIABILITY PENALTIES AS DETERMINED
BY THE U.S. JUDICIAL SYSTEM.
WARNING! Practice the use of your X-Stand™ Treestand full-body fall arrest harness
and suspension relief device (SRD) at ground-level in the presence of a responsible adult
to experience the feeling of hanging suspended before using in a hunting environment.
Failure to follow these instructions may result in serious injury or death!
WARNING! NEVER allow the full-body fall arrest harness lanyard/tether to get under
your chin or around your neck. This poses a choking hazard that can lead to serious injury
or death. Failure to follow these instructions may result in serious injury or death!
WARNING! If your hunting location is unknown by anyone and communication efforts
are unsuccessful, you must have a personal plan for self-recovery/escape should you
experience a fall. Prolonged suspension in a full-body fall arrest harness can be fatal.
It is important to exercise the legs by pushing against the tree or doing other forms
of continuous leg exercises to avoid blood pooling while being suspended. Varying
may require different plans for self-recovery/escape the
effects of prolonged suspension. Have a personal plan and practice it in the presence
of a responsible adult before leaving the ground. No one escape/rescue plan will work
for every hunter, on every tree, in every circumstance. Only you can determine the best
self-recovery/escape plan for your hunting situation before leaving the ground. There is
time to make a correct decision on what action to take if a fall occurs while wearing a
full-body fall arrest harness. It is important to remember, DO NOT PANIC. Remain calm
and implement your practiced rescue, relief and recovery plan. Hunt from the ground
when a self-recovery/escape ability is absent. Failure to follow these instructions may
result in serious injury or death!
WARNING! TO REDUCE YOUR RISK OF INJURY OR DEATH FROM FALLS YOU MUST
WEAR A LINEMAN STYLE (CLIMBING BELT) FULL-BODY FALL ARREST HARNESS THAT
MEETS ASTM STANDARDS. ALWAYS REMAIN HARNESSED TO THE TREE FROM THE
MOMENT YOU LEAVE THE GROUND UNTIL YOU RETURN TO THE GROUND. The lineman’s
(climbing belt) style full-body fall arrest harness must be worn in compliance with the
manufacturer’s instructions. If you do not or cannot use a lineman’s style (climbing belt)
use this or any X-Stand Treestand product(s).
STEP 1. Identify the main parts of the full-body fall arrest harness (see Fig. 1). Hold the
full-body fall arrest harness by the tether loop ensuring the harness is upright and leg
straps are hanging down. Straighten any parts that have become twisted. Insert arms
through each shoulder strap. (see Fig. 2)
STEP 2 . Feed the left leg strap between legs and thread through the bottom left waist
loop. Repeat with the right leg strap, feeding between legs and through right waist loop.
(see Fig. 3)
4

READTHIS MANUAL IN ITS ENTIRETY PRIOR TO USINGTHIS PRODUCT.

ATTENTION!! WHEN YOUSEE A “ WARNING!” BE SURE TO HEED THEMESSAGE!
THE INFORMATION CONTAINED IN THESE MESSAGES CAN SAVE YOUR LIFE!!
This instruction manual complies with ASTM F2337 Standard Test Method for Treestand Fall Arrest Systems.
5
tree
belt
Tree Belt
Side View
Slot A
Left Leg
Strap
Right Leg
Strap
3 Bar
Buckle
Up through Slot B
Down through Slot A
Down through Slot B
Pull tight to secure
Back over top
Slot B
FIG 4
FIG 6
FIG 7
FIG 9
FIG 8
Sitting/
Seating
tree
belt
tether
tree
belt
Standing
tether
shoulder
strap shoulder strap
shoulder
strap shoulder strap
Leg Strap
waist
belt
Leg Strap
FIG 2
shoulder
strap shoulder strap
shoulder
strap shoulder strap
Leg Strap
waist
belt
Leg Strap
FIG 3
tree belt
tether
FIG 5
Tether
Tether
Loop
Tether
Loop
Three
Bar
Buckle
Three
Bar
Buckle
Front ViewRear View
SRD Strap
Right
Waist
Loop
Right
Leg Strap Right
Leg Strap
Left
Leg Strap
Left
Leg Strap
Left
Waist
Loop
Tether
SRD Strap
FIG 1
STEP 3 . Secure the two leg straps by threading the 3 bar buckle as shown in Figure 4.
Tighten the leg straps snuggly. DO NOT over tighten as this will cut off the circulation to
your legs. The X-Stand™ Treestands full-body fall arrest harness should look like the
one depicted in Figure 5 when done correctly. Note: If leg straps are too long, feed right
leg strap with buckle through bottom of the right waist loop, down the top of the left
waist loop and secure to left leg strap with 3 Bar Buckle as instructed.
WARNING! It is very important to complete this Step of the assembly. Improperly
secured buckle may cause full-body fall arrest harness failure resulting in serious
injury or death! If there is not enough strap available to complete this step, DO NOT
USE THIS FULL-BODY FALL ARREST HARNESS! You may need to purchase and use a
larger specialty sized full-body fall arrest harness that complies with ASTM standards.
STEP 4 . Thread the tree belt through the loop at the end of the harness tether as seen in
Fig 5. Wrap the tree belt around the tree trunk. You must install your tree belt at or above
eye-level (Fig 7). DO NOT allow the lanyard loop to cover the tree belt buckle. Keep the
sewn loop a minimum of six (6) inches away from the tree belt buckle! To secure the tree
belt insert free end up through the slot in the buckle closest to opposite end of the tree
belt, then cross over the sliding mechanism and back down through opposite slot. Pull on
strap to secure and test to make sure sliding mechanism engages creating secure strap
placement. (Fig 6). As you climb, slide your tree belt up as shown in Figure 8. Remember,
keep the least amount of slack in the assembly as possible. A tight harness tether greatly
reduces the distance you can travel should you experience a fall while climbing.
STEP 5. With the tree belt tight to the tree at or above eye level, and you are your desired
height, carefully sit down making sure that the harness tether is tight with the slack
removed when in the seated position. (Fig 9).

READ THIS MANUAL IN ITS ENTIRETY PRIOR TO USINGTHIS PRODUCT. 
ATTENTION!! WHEN YOUSEE A “ WARNING!” BE SURE TO HEED THEMESSAGE!
THE INFORMATION CONTAINED IN THESE MESSAGES CAN SAVE YOUR LIFE!!
This instruction manual complies with ASTM F2337 Standard Test Method for Treestand Fall Arrest Systems.
6
To activate your product’s warranty, a registration card (found in the back of this manual)
must be completed and returned to the manufacturer within 30 days of purchase.
Be sure to keep a copy of this card for your records.
Should you have an questions about the assembly, installation or use of this X-Stand product,
or any other X-Stand products, please do not hesitate to call one of our customer service
representatives at 540-877-2769 and they will answer all questions you may have about any
of the complete line of X-Stand products.
STEPS TO FOLLOW IF A FALL WERE TO OCCUR:
Although no one plans to fall from their treestand, falls can and do occur without
warning. It is important to become familiar with the guidelines below and practice your
recovery plan at ground-level. Failure to read, understand, and follow these Steps may
result in serious injury or death!
WARNING! There is time to make a correct decision on what action to take if a fall
occurs while wearing a full-body fall arrest harness. It is important NOT TO PANIC!
Remain calm and implement your practiced rescue, relief and recovery plan. Failure to
follow these instructions may result in serious injury or death!
WARNING! A suspension relief device must be on your person and readily accessible
while using a full-body fall arrest harness. This device will allow you to relieve the
load on the lower extremities if suspended in a full-body fall arrest harness and help
maintain circulation in the legs and mitigate suspension trauma (blood pooling). Follow
all instructions below regarding the provided SRD (Suspension Relief Device) and NEVER
remove it from your full-body fall arrest harness. Failure to follow this warning may result
in serious injury or death!
STEP 1. After a fall, take a moment to catch your breath and stay calm; DO NOT PANIC.
STEP 2. Pull on the SRD strap located on the front right side of your full-body fall arrest
harness. (see Fig. 10)
STEP 4 . If you are able to reach your ladder or climbing system, use it to get back into
your secured treestand and then carefully climb down to ground-level. If you are not able
to reach your stand, remain calm and continue to stand in the SRD loop until help arrives.
(see Fig. 13)
STEP 3. Adjust the SRD strap so that you are able to step into the loop and then stand up
relieving the pressure on your lower extremities. The loop size can be adjusted by moving
the buckle up or down. (see Fig. 11 & 12)
STEP 5. Use your personal locating device or cell phone to call for help.
NOTE: Several optional commercial products/systems are available that offer self-
recovery or self extraction from a fall when suspended in a full-body fall arrest harness.
Some systems automatically descend the user while others allow user control.
One of these products/systems can be considered for use as an additional safety
precaution against prolonged suspension and suspension trauma. Be sure to follow the
manufacturers’ directions on the safe use of these products/systems.
FIG 10
FIG 11
FIG 12 FIG 13

Security/Backpacking Strap
Female End Security/Backpacking Strap
Male End
Foot Strap
(A) 1/4” x 1” Allen Head Bolt (4 Pieces)(B) 1/4” Nylock Nut (4 Pieces)
(C) 1/4” Steel Washer (4 Pieces)
Bungee Cord
Seat Cusion
Allen Wrench (1 Piece)
Qty
Part # Description
XP15-0353 FOOT PLATFORM 1
XP15-0355 SEAT PLATFORM 1
XP15-0357 FLEX ARMS 4
XP15-0360 SECURITY/BACKPACKING
STRAPS (MALE)
2
XP15-0361 SECURITY/BACKPACKING
STRAPS (FEMALE)
2
XP15-0366 CLIMBING CABLES 2
XP15-0367 CABLE ADJUSTERS 4
XP15-0369 FOOT STRAP 1
XP87-0083 Allen Wrench 1
XP15-0371 BUNGEE CORD 2
XP15-0375 SEAT CUSHION 1
XP15-0378 ARMREST FOAM 2
XP15-0379 ARMREST COVERS 2
XP15-0011 FULL-BODY HARNESS 1
XP15-0020 SAFETY DVD 1
XP15-0351 INSTRUCTION MANUAL 1
XP87-0029 1/4” Nylock Nut {B} 4
XP87-0082 1/4” x 1” Allen Head Bolt {A} 4
XP87-0058 1/4” Steel Washer {C} 4
X-1 MINI - PARTS LIST
READ THIS MANUAL IN ITS ENTIRETY PRIOR TO USINGTHIS PRODUCT. 
This instruction manual complies with the ASTM F2123 - Standard Practice for Treestand Instructions.
Qty
Part # Description
7

Foot Platform
Seat
PlatformFlex
Arms
Cable
FIGURE 1a
READTHIS MANUAL IN ITS ENTIRETY PRIOR TO USINGTHIS PRODUCT.
8
This instruction manual complies with the ASTM F2123 - Standard Practice for Treestand Instructions.
ASSEMBLY INSTRUCTIONS
- X-1 MINI -
FIGURE 1
STEP 1. Install the flex arms onto the foot platform using one (1) 1/4” x 1” allen head
bolt{A}, one (1) washer {C} and one (1) nylock nut per flex arm (Fig 1). NOTE: The
ends of the flex arms with the round eyes should be placed upright and the arm
loops should face outwards. Repeat this step for both foot platform flex arms.
STEP 2. Locate the seating platform and the remaining two (2) flex arms. Install the
flex arms onto the seat platform using one (1) 1/4” x 1” allen head bolt {A}, one (1)
washer {C} and one (1) nylock nut per flex arm (Fig 1). NOTE: The ends of the flex
arms with the round eyes should be upright and facing outward. Repeat this step
for both standing platform flex arms.
NOTE: Top (seat) section of your
platform should be assembled
with cable adjusters pointing
down and the bark biter on the
lower portion of the frame.

FIGURE 2a
FIGURE 2
FIGURE 3
READ THIS MANUAL IN ITS ENTIRETY PRIOR TO USINGTHIS PRODUCT. 
This instruction manual complies with the ASTM F2123 - Standard Practice for Treestand Instructions.
STEP 3. Next install the climbing cable by inserting one end of one (1) the climbing
cables into the cable adjuster by pulling on the spring bolt. (Fig 1A). Then thread
the cable through the eye holes of the flex arms and insert the free end of the cable
into the cable adjuster on the opposite side by pulling on the pin. Repeat this STEP
for the installation of the climbing cable on the seat platform.
STEP 4. Attach the (Male) backpack/connecting straps to the foot platform. (Fig 2 &
2A).
STEP 5. Finish assembly by attaching seat cushion and arm covers. (Fig 3).
9

Anchor End
Adjustment End
FIGURE 4 FIGURE 5
READTHIS MANUAL IN ITS ENTIRETY PRIOR TO USINGTHIS PRODUCT.
10
This instruction manual complies with the ASTM F2123 - Standard Practice for Treestand Instructions.
STEP 1. Select a
straight, healthy
tree between
9-18 inches in
diameter.
STEP 2. Once you
have determined
which tree you
will climb, unpack
your X-Stand
climber. Prior to installing your climber, make
certain your security straps are connected.
If the security straps are not installed, do not
use your stand.
STEP 3. Locate the foot platform. Remove
the climbing cable from the cable adjuster.
PLEASE NOTE: Each climbing cable has
two distinct ends. The anchor end has
one (1) swagged fitting. The other end, the
adjustment end, has five (5) swagged fittings
(Fig 4). The adjustment end is used to either
lengthen or shorten the climbing cable. Wrap
the climbing cable around the tree trunk,
pass it through the flex arm eye and insert
it back into the opposite cable adjuster.
Remember to take into account the gradual
narrowing of the tree trunk when setting
your stand. Tilt both the standing and seating
platforms slightly in an upward direction to
compensate for this narrowing. (Fig 5). If care
is not taken to setup the treestand in this
manner at ground-level, once you reach your
desired climbing height, your stand will be at
an awkward, dangerous and unusable angle.
STEP 4. After you properly put on the full-body
fall arrest harness provided, attach the tree
tether to the tree at eye level. With the safety
harness tether placed over either shoulder
carefully step onto the middle of the standing
platform.
CLIMBING INSTRUCTIONS
- X-1 MINI -
WARNING! This X-Stand is equipped with two (2) security/connector straps (they double as backpacking straps
also). These security/connector straps are designed to stabilize your X-Stand while at climbing height and to
keep the foot platform from separating from the seat platform inadvertently while climbing. THEY MUST REMAIN
CONNECTED AT ALL TIMES. Should the foot platform inadvertently slip-off your feet during use, retrieve it by simply
pulling up on the security/connector straps. Once you have reached your desired climbing height, reach down and
pull the tag ends (loose ends) of the security/connector straps to tighten both straps. By doing so, you lock the
seat and foot platforms to the tree. NOTE: You must lengthen the straps prior to attempting to climb down. DO NOT
modify or disconnect these security/connector straps for any reason.


FIGURE 6 FIGURE 7
FIGURE 8
FIGURE 6a
READ THIS MANUAL IN ITS ENTIRETY PRIOR TO USINGTHIS PRODUCT. 11
STEP 5. Next, slide your feet under the foot
straps. Then slide the tree tether up the tree as
high as you can reach. NOTE: To tighten the foot
straps simply push your feet outward when
climbing or descending. This will keep the
strap tight.
STEP 6. Grasp the sides of the stand by the
armrests and lift the seat platform as high
as possible while still being able to rest your
weight on the armrests. Remain Standing.
STEP 7. While standing, place your weight on
your forearms as shown in Figure 6a. With your
weight centered squarely on your forearms, lift
the foot platform by lifting your knees with your
toes pointed downward. (Fig 6). Lift the foot
platform to a comfortable distance from the
seat platform and re-engage it on the tree trunk
by raising your toes upward and pushing your
heels down. Once the foot platform has been
re-engaged, while holding the seat platform
stand back up on the foot platform and lift the
seating platform to a comfortable height. (Fig
7). Repeat STEP 7 until you have reached your
desired climbing height. Remember to move
your harness tree belt up as you climb. (Fig 8)
STEP 8. Once you have reached your desired
climbing height, the security straps must be
tightened to cinch and secure the X-Stand to
the tree trunk. Once you have reached your
desired hunting height, sit down on the seating
platform. While seated, reach down and pull
the tag ends (loose ends) of the security straps
to tighten both strap. By doing so, you lock
the seating and standing platforms to the tree.
NOTE: You must loosen these straps prior to
attempting to climb down.
This instruction manual complies with the ASTM F2123 - Standard Practice for Treestand Instructions.

FIGURE 6
FIGURE 7
READTHIS MANUAL IN ITS ENTIRETY PRIOR TO USINGTHIS PRODUCT.
12
This instruction manual complies with the ASTM F2123 - Standard Practice for Treestand Instructions.
STEP 1. Lengthen the security straps by pulling on the
male portion of the buckle to add slack to the strap.
NOTE: DO NOT DISCONNECT THE SECURITY STRAPS UNDER
ANY CIRCUMSTANCE!
STEP 2. Slip your feet in the foot straps
STEP 3. While standing, place your weight on
your forearms as shown in Figure 6a. With your
weight centered squarely on your forearms, lift the
foot platform by lifting your knees with your toes
pointed downward. (Fig 6). Move the foot platform
down the tree a comfortable distance without
exceeding the length of your tether straps and re-
engage it on the tree trunk by raising your toes up-
ward and pushing your heels down. Once the foot
platform has been re-engaged, while holding the
seat platform stand back up on the foot platform
and move the seating platform down the tree a
comfortable distance and re-engage it on the tree
trunk. (Fig 7). Repeat STEP 3 until you have reached
the base of the tree. Remember to move your full-
body harness tree belt down as you descend. (Fig 8)
STEP 4. Once you are safely back on ground-level,
carefully step off of the foot section and remove
your full body fall arrest harness. Remove both foot
section and seat section from the tree and store out
of direct sunlight for next use.
WARNING! After descending back to the ground, do not remove
the full-body fall arrest harness tether from the tree until you have
to follow this warning may result in serious injury or death!
CLIMBING DOWN
- X-1 MINI-

FIGURE 10
FIGURE 9
FIGURE 10a
FIGURE 11
FIGURE 12
READ THIS MANUAL IN ITS ENTIRETY PRIOR TO USINGTHIS PRODUCT. 13
This instruction manual complies with the ASTM F2123 - Standard Practice for Treestand Instructions.
BACKPACKING INSTRUCTIONS
PACKING YOUR NEW X-STAND COULDN’T BE EASIER!
To pack your stand simply, nest the seat platform into the foot
platform by placing the seat platform on top of the foot platform
(Fig 9).
With the two platform nested together, (Fig 10) place the bungee
cord around the two platforms (Fig 10A).
With the bungee cord installed, slip the female (short ends) end of
the security straps through the platform treads and connect the
male (long ends) end to the female ends. (Fig 11).
You can now carry your X-Stand using the backpacking straps/
security straps (Fig 12).

X-Stand Treestands | 14645 Felton Court, Suite 103 | Apple Valley, MN 55124
ATTENTION!!WHEN YOU SEE A “WARNING!” BE SURE TO HEED THE
MESSAGE! THE INFORMATION CONTAINED IN THESE MESSAGES
CAN SAVE YOUR LIFE!!
READTHIS MANUAL IN ITS ENTIRETY PRIOR TO USINGTHIS PRODUCT.
14
This instruction manual complies with the ASTM F2123 - Standard Practice for Treestand Instructions.
To activate your product’s warranty, please mail in your registration card or submit it online at www. X-Stand.com
Product Purchased Model Number
Serial Number
Owner’s Name
Street Address
City State Zip Code
E-mail Address Phone
Date Purchased
Purchased From (Dealer Name)
How did you hear about us: Catalog Webpage Friend Magazine
Other, Please Explain
Are you a: Bow Hunter Gun Hunter Both
Treestand Preference: Fixed Position Climbing Ladderstand
WARNING! Prior to stepping onto the treestand, connect the full-body fall arrest harness tether to the tree trunk at or above eye-level. Failure to follow these instructions may result
in serious injury or death!
WARNING! NEVER adjust the length of chain or level of the platform when above ground-level. All adjustments must be made at ground-level. Failure to follow these instructions
may result in serious injury or death!
WARNING! After descending back to the ground, do not remove the full-body fall arrest harness tether from the tree trunk until you have reached the ground and your feet are
WARNING! Never rely on a tree branch for support while climbing. Failure to follow these instructions may result in serious injury or death!
WARNING! Never attempt to climb up or climb down with a weapon and/or gear in your possession. ALWAYS unload your weapon and pull it up to hunting height using a tether or
to attempting to climb down. Use this same method when raising or lowering all other gear. Failure to follow these instructions may result in serious injury or death!
WARNING! As a tree grows upward from the ground it gradually narrows. When installing your climber at ground-level you must consider this gradual narrowing and adjust your
standing and seating platforms slightly upward. Failure to follow these instructions may result in serious injury or death!
WARNING! Security straps have been included with your X-Stand climber. These are designed to connect the standing platform to the seating platform. In the unlikely event you
lose contact with either while climbing, these security straps allow you to regain control. Prior to climbing, insure these security straps are installed. Failure to follow these instructions
may result in serious injury or death!
WARNING! While climbing, adjustments to the full-body fall arrest harness tether/tree belt will be frequent and must be coordinated with treestand movement to maintain the least
amount of slack in the tether that will allow for safe climbing. Failure to follow these instructions may result in serious injury or death!
CLIMBING TREESTAND WARNINGS & PRODUCT REGISTRATION

READ THIS MANUAL IN ITS ENTIRETY PRIOR TO USINGTHIS PRODUCT. 15
This instruction manual complies with the ASTM F2123 - Standard Practice for Treestand Instructions.
STANDARD LIMITED WARRANTY
Warranty: X-Stand™ Treestands warrant all X-Stand™ treestands, climbing system products and hunting
accessories to be free from defects in material and workmanship for a period of twelve months from
the original date of retail purchase. X-Stand™ Treestands warrants the enclosed hardware (where
applicable) is delivered to be free from physical defects for a period of twelve months from the original
date of retail purchase.
Repair Procedures, Exclusive Remedy: X-Stand™ Treestands will at its option, repair, or replace products
not conforming to this limited warranty at no charge. THIS IS THE SOLE AND EXCLUSIVE REMEDY
AVAILABLE FOR BREACH OF WARRANTY OR UNDER ANY OTHER LEGAL THEORY WITH RESPECT
TO X-STAND™ Treestands. If you find a product to be defective, contact the customer service
department at 540-877-2769. When you receive authorization, return the product as directed at your
expense. Product repairs not covered by warranty, and product updates, will be provided at a set rate.
Limitations: This warranty is void if the product is damaged by improper or abnormal use or by
accident; if the product is altered or modified in any way other that those directed by official X-Stand™
Treestands instructions; or if any attempt is made to repair the product without authorization from X-
Stand™ Treestands. It is solely the purchaser’s responsibility to determine the suitability of these
products for each particular application. X-Stand™ Treestands products are intended for hunting and
hunting only. X-Stand™ Treestands are in all events not suitable, and are not authorized, for use in any
situations that might pose potentially injurious to life and health, other than those situations that the
products are intended for. This warranty is not assignable or transferable.
No Other Warranties: EXCEPT AS PROVIDED IN THIS LIMITED WARRANTY SET FORTH IN THE
WARRANTY CARD SUPPLIED WITH X-STAND™ TREESTANDS AND INSTRUCTION SHEETS ARE
PROVIDED “AS IS”. ALL OTHER WARRANTIES AND REPRESENTATIONS, ORAL OR WRITTEN,
EXPRESSED OR IMPLIED, INCLUDING BUT NOT LIMITED TO ANY IMPLIED WARRANTIES OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE EXCLUDED AND DO NOT
APPLY. THERE ARE NO WARRANTIES WHICH EXTEND BEYOND THE DESCRIPTION ON THE FACE
HERE OF. Except as required by law, no representative, agent or employee of X-Stand™ Treestands is
authorized to make warranties, representations, or obligations inconsistent with or in addition to those
set forth in this limited warranty.
No Damages: IN NO EVENT WILL X-STAND™ Treestands BE LIABLE FOR DIRECT, INDIRECT, SPECIAL,
INCIDENTAL, OR CONSEQUENTIAL DAMAGES RESULTING FROM BREACH OF WARRANTY OR
UNDER ANY OTHER LEGAL THEORY, even if advised of the possibility of such damages. In no event
will X-Stand™ Treestands be liable for sums in excess of the purchase price of the product. X-Stand™
Treestands is thus not liable for lost profits or goodwill; downtime; damage or destruction of items or
equipment used with, or in conjunction with, X-Stand™ Treestands; personal injury or loss; or any other
damages.
General: (a) This agreement is the entire agreement between you and X-Stand™ Treestands.;
supersedes any prior or different agreements, representations, or proposals; and may be changed
only by written agreement with X-Stand™ Treestands. (b) Waiver by any party of any default or breach
of this agreement will not constitute a waiver of any subsequent default or breach of the same of
different kind. (c) The invalidity of any provision of this agreement shall not affect the validity of the other
provisions hereof. (d) This agreement shall be governed by the laws of the State of Minnesota, U.S.A.
X-Stand™ Treestands; Apple Valley, MN 55124

First Edition,January 2017 Published by X-Stand Treestands, Apple Valley Minnesota. © X-Stand Treestands. All rights reserved.