Xenon SM-SL608 User manual

After operation successfully,
voice broadcast: press 1 for
administrator settings, press 2
for user settings, press 3 for
system settings, press 4 for
restore factory settings.
press“*”then press“#”
Voice broadcast: please enter
administrator information
(enter 123456 #)
SM-SL608 Smart lock (5-in-1) Instructor Menu (Wi-Fi)
1. Function and Operation
1.1 Description of terms and functional keys
1) Administrator information: refers to the administrator's fingerprint, password or ID card.
2) Unlock information: refers to the input fingerprint, password or IC card information
(including administrators and ordinary users).
3) Key“*” ：clear key/back key.Enter the password and point by clearing the previous
input.Click the clear key three times in succession, empty all input.
4) Key“#”：confirmation key or menu function key.
2. Original state
1) The factory administrator initial password is 123456, under the initial state any
fingerprint, IC card or password can open the lock.
2) Any fingerprint, IC card or password which are not input can’t open the lock after
inputting the administrator information.
3.Access door lock function management (step one)
Initialization state

Voice broadcast: press 1 for
administrator settings,press 2 for
user settings.
lock function management
(step one)
After input successful, press *
to return to the previous level
to continue adding an
administrator or exit
Press 1 to add administrator, input
fingerprint or password (you should
input fingerprint four times, input
password 6-8 digit 2 times (8888 #),
and ID card one time)
Enter administrator settings
(step two)
Voice broadcast: press 1 for
administrator settings,press 2 for user
setting.
Press 2 voice broadcast:please input
number, press # to confirm (for
example 002 #)
After input successful, press *
to return to the previous level
to continue adding an
administrator or delete
administrator
Enter administrator settings
(step one)
Voice broadcast: press 1 for
administrator settings,press 2 for
user settings.
Press 2 voice broadcast:press 1 to add
user, press 2 to delete user.
Press 1 to add administrator,please
input unlock information, like
fingerprint or password (you should
input fingerprint four times, input
password 6-8 digit 2 times (6666 #))
4. Administrator settings
1）Add administrator (step 2)
2）Delete administrator information
5. Common user setting
1) Add administrator information

Enter administrator settings
(step one)
Voice broadcast: press 1 for
administrator settings,press 2 for user
setting.
Press 2 voice broadcast:press 1 to add
user,press 2 to delete user.
Press 2 voice broadcast: press
1 for number delete , press 2
to delete all.for example,press
1,and then input number(003#),
you will delete successfully.
2）Delete user information
6.system setting
1) Voice setting
2)Unlock mode setting
Enter administrator settings
(step one)
Voice broadcast: press 1 for
administrator settings,press 2 for user
setting.
Press 3 voice broadcast: please press
1 for voice setting, 2 for unlock mode,
3 for language selection, 4 for time
setting, and 5 for room number
modification.
Press 1 voice broadcast: press
1 to open the voice, press 2 to
close the voice.you can choose
one choice,and then it would tell
you that operated successful.
Enter administrator settings
(step one)
Voice broadcast: press 1 for
administrator settings,press 2 for user
setting.
Press 3 voice broadcast: please press
1 for voice setting, 2 for unlock mode,
3 for language selection, 4 for time
setting, and 5 for room number
modification.
Press 1 voice broadcast: press
1 to open the voice, press 2 to
close the voice.you can choose
one choice,and then it would tell
you that operated successful.

2) Language settings
3) Time setting
4) Room number modification
Enter administrator settings
(step one)
Voice broadcast: press 1 for
administrator settings,press 2 for user
setting.
Press 3 voice broadcast: please press
1 for voice setting, 2 for unlock mode,
3 for language selection, 4 for time
setting, and 5 for room number
modification.
Press 3 voice broadcast:
press 1 for Chinese, press 2
for English. you can choose
one choice,and then it would
tell you that operated
successful.
Enter administrator settings
(step one)
Voice broadcast: press 1 for
administrator settings,press 2 for user
setting.
Press 3 voice broadcast: please press
1 for voice setting, 2 for unlock mode,
3 for language selection, 4 for time
setting, and 5 for room number
modification.
Press 4 voice broadcast: it is
11:53,March 4th,2019 now.Please
modify based on the format
(year-month-day,for
example:1903041153), and then
press # to confirmed, it would tell
you that operated successful.
Press 3 voice broadcast: please press
1 for voice setting, 2 for unlock mode,
3 for language selection, 4 for time
setting, and 5 for room number
modification.
Press 5 voice broadcast: room
number 8888, please input
correct room number (4
numbers)and press # to confirm.
Enter administrator settings
(step one)
Voice broadcast: press 1 for
administrator settings,press 2 for user
setting.

7. Restore factory settings
8. APP Configuration (Tuya Smart) ; optional
1) Search “Tuya Smart” in App Store or an App market, download and install it.
2) Register using your cellphone number and log in.
3) Click “Security &Sensor”, find “Lock(Wi-Fi)”, click and add a device following instructions
before use.
4) Remote unlocking: wake up the screen and press “9”+”#”. There will be a voice prompt：
requesting remote unlocking.
Add a network
1) Press“*”+“#”to authenticate administrator identity and then press “1” to access
administrator settings. Then there will be a voice prompt of pressing “3” for network
configuration.
2) Voice prompt in network configuration mode: press “1” for hotspot connection and “2” for
intelligent connection.
a) Hotspot connection mode:
b) Intelligent connection mode:
3) When the network is successfully added, the 1st, 2nd, 3rd and 4th lights on the keyboard will
be on in order with a voice prompt of “operation completed”.
4) In the event of network addition failure, the 1st, 2nd, 3rd and 4th lights on the keyboard will not
be on and there will be a voice prompt of “operation failed” upon timeout.
Enter administrator settings
(step one)
Voice broadcast: press 1 for
administrator settings,press 2 for user
setting.
Press 4 voice broadcast: please input
administrator information (123456),
press # to confirm.
Successful initialization

9. WeChat official account configuration (Usmart home Wi-Fi)
optional
1) Open the WeChat search "Usmart home " official account.
2) Click “WeChat Control” tap on Usmart home official account
3) Register and log in with your mobile number.
4) Click add Wi-Fi device
Set up network (lock setting)
5) After pressing “*”+“#” to verify the administrator, press “1” to enter the administrator settings,
and press “3” to configure the network.
6) Network configuration: press "1" for hotspot connection, press "2" for delete connection.
c) Hotspot connection mode: follow the hints of WeChat official account
7) When connection successful, the 1234 button light on the keyboard light up in sequence,
voice on “Operation succeeded”
8) When connection fails, the 1234 button will not light on, and the voice on “Operation failed”
after timeout.
10. Other notes
1）Input the wrong password more than 5 times in a row, the keyboard lock for 30 seconds, it
does not respond to any operating system in 30 seconds.
2）Password peeping prevention function: input password as follows when opening the door
with password: XXX password XXX; you can add some extraneous codes before and after
the password, and then press # to confirm. The password must be included in the input
contents.
3）If there is no operation more than 10 seconds , system will automatically exit.
4）After the voltage is lower than 4.8v, the lock will automatically alarm every time when it is
opened. After the alarm, the lock can be opened for 200 times. After the number of times
exceeds, each unlock delay is 5 seconds, new batteries must be replaced before the
number of times available.
5）When normal open mode is off, press 5 # successively, and the voice says "please enter
unlock information". After entering the unlock information, the voice says "normal open
mode, please pay attention to locking".
6）When normal open mode is on, press 5 # successively, and the voice says "normal open
mode closed".
7）Back locking function: After pressing back locking key, the voice says "the door is locked".
Now, ordinary users cannot open it, and only administrators can do so.

11.Technical Parameters
Technical Parameters
Items
Parameters
Memo
1
Quiescent current
≦50uA
2
Dynamic current
≦180mA
3
Administrators’ number
9
4
Fingerprint number
110
5
Fingerprint + password + card capacity
300
6
Fingerprint scanner
semiconductor
7
Fingerprint contrast time
≦0.6Second
8
Fingerprint identification Angle
360°
9
False Rejection Rate
≦0.1%
10
False Recognition Rate
≦0.0001%
11
Reaction time
≦0.1 Second
12
Power type
6V
13
Emergency powering
5VDC
14
Working temperature
-25℃~60℃
15
Working Relative Humidity
20%~90%RH
16
Human voice
Yes
17
KBD
Touch standard 12-bit keyboard
18
Password Length
6-8bit
19
Phantom password
16bit
20
Low voltage alarm
4.8±0.2V
21
Unlock time
≦1Second