Xerox WorkCentre Pro C2128 User manual

Warning: In order to have the Three Hole printing service you
must have the Professional or Advanced Office finisher installed
on your machine. Please contact your local Xerox sales repre-
sentative for details.
Fig. 1-1
Fig. 1-2
In the Printers window, right click the Xerox WorkCentre Pro
C3545 PS icon.
Note: This screen may vary depending on your Operating
System.
Fig. 1-3
Click Properties.
Fig. 1-4
Click Configuration.Fig. 1-6
Click the down arrow Finisher/Output Tray and select
Professional Finisher from the drop down menu. Click the
down arrow and select 3 Hole Punch Unit from the drop down
menu. Click OK.
Fig. 1-5
Click Installable Options.
Three Hole Printing - 1 of 4

Fig. 1-7
Click OK.
Fig. 1-8
Close the window. Click the “X” in the upper right corner to
close the window.
Three Hole Printing - 2 of 4
Quick Start Guide
WorkCentre Pro
C2128/C2636/C3545
Three Hole Printing
Part 1 of 2

Fig. 2-2
Click on the File and select Print from your application.
Fig. 2-3
Verify that the correct printer is selected and click on Properties.
Fig. 2-4
Click on the Paper/Output tab. Fig. 2-6 Click OK.
Fig. 2-5
Click on the down arrow from Select Finishing and select 3
Hole Punch. Click OK.
Note: Collated: 3 Hole Punch will be displayed in the Finishing
Summary.
Three Hole Printing - 3 of 4
Warning: In order to have the Three Hole printing service you
must have the Professional or Advanced Office finisher installed
on your machine. Please contact your local Xerox sales repre-
sentative for details.
Fig. 2-1

Fig. 2-7
Print out is completed.
Three Hole Printing - 4 of 4
Quick Start Guide
WorkCentre Pro
C2128/C2636/C3545
Three Hole Printing
Part 2 of 2