Xerox Phaser 6200N User manual

FRU Parts List 253
FRU Parts List
Parts List Contents
Print Engine Page
PL 1.1 Covers 256
PL 2.1 Universal Paper Tray 258
PL 3.1 Paper Feed I 260
PL 3.2 Paper Feed II 262
PL 3.3 Paper Feed III 264
PL 4.1 Housing Assembly Retard 266
PL 5.1 Chute Assembly In 268
PL 6.1 Chute Assembly Out 270
PL 7.1 Chute Assembly Exit 272
PL 8.1 Transfer Roller & Fuser Assembly (CRCs) 274
PL 9.1 Xerographics 276
PL 10.1 Holder Toner Cartridge Assembly 278
PL 11.1 Frame and Drive Assemblies 280
PL 12.1 Electrical 282
PL 13.1 Harness Assemblies 284
Optional High-Capacity Feeder
PL 14.1 High-Capacity Feeder Paper Trays 2 & 3 286
PL 14.2 High-Capacity Feeder Covers 288
PL 14.3 High-Capacity Feeder Guides and Turn Chute Assembly 290
PL 14.4 Paper Pick Assembly Trays 2 & 3 292
PL 14.5 High-Capacity Feeder Harness, Board and Motor 294
Supplies and Accessories
PL 15.1 Xerox Supplies and Accessories 296

254 Phaser 6200 Color Laser Printer - Service Manual
Changes to Xerox products are made to accommodate improved components as they
become available. It is important when ordering parts to include the following
information:
■ Component's part number
■ Product type or model number
■ Serial number of the printer
Serial numbering. Particular fields in the serial number indicate the modification
level of the printer, the date of its manufacture and the sequence number of the printer
produced on that day. The serial number is coded as follows:
■ The text “S/N” followed by the serial number in the barcode.
■ The barcode does not include a field identifier.
■ The nine digit serial number is based on the following format:
PPPRSSSSS
R - Single digit numeric revision digit. To be rolled when a major product change occurs. Initiated
with a change request.
SSSSS - Five digit numeric serial number.
Serial Number Example:
LPH453072:
LPH = Product code for the 110V Printer
4= Revision level
53072 = Serial number
PPP = Three digit alphanumeric product code
Product Model Voltage Product Code
6200 N110V LPH
6200 DP 110V LPH
6200V N220V LPK
6200V DP 220V LPK

FRU Parts List 255
Using the Parts List
1. No. = The callout number from the exploded part diagram.
2. Part Number = The material part number used to order specific parts.
3. Qty = This number represents the parts per printer, not the number of parts
supplied in the actual part order.
4. Name/Description = Details the name of the part to be ordered and the number of
parts supplied per order.
5. Parts identified throughout this manual are referenced PL#.#.#; For example,
PL3.1.10 means the part is item 10 of Parts List 3.1.
6. A black triangle preceding a number followed by a parenthetical statement in an
illustrated parts list means the item is a parent assembly, made up of the individual
parts called out in parentheses.
7. The notation “with X~Y” following a part name indicates an assembly that is
made up of components X through Y. For example, “1 (with 2~4)” means part 1
consists of part 2, part 3, and part 4.
8. An asterisk (*) following a part name indicates the page contains a note about this
part.
9. The notation (NS) next to a part indicates that pariticular part is not spared, but
contained in a kit or major assembly.
10.The notation “J1<>J2 and P2” is attached to a wire harness. It indicates that
connector Jack 1 is attached to one end of the wire harness and connector J2 is
attached to the other end that is plugged into P2.
Note: Only parts showing part numbers are available for support.
Parts not showing part numbers are available on the parent
assembly.
Legend:
Identifier Meaning
CC-ring
EE-ring
KL K-clip
SScrew

256 Phaser 6200 Color Laser Printer - Service Manual
PL 1.1 Covers
S6200-228

FRU Parts List 257
PL 1.1 - Covers - FRU Parts List Table
No. Part Number Qty Name/Description
1333-4382-00 1Control Panel (Front Panel Display)
2116-0003-00 1Cover Assembly, Front (with 3-7)
3 1 Cover, Front (NS, part of PL 1.1.2)
4 1 Holder, Lever Out (NS)
5 1 Lever Out (NS)
6 1 Con. Amp 175694-3 (NS)
7116-0004-00 1Fan, Fuser
8116-0005-00 1Cover Assembly, Top
9116-0006-00 1Cover, Top Main
10 116-0007-00 1Cover Assembly, Top Image Unit (with11-19) (Door C)
11 1CAM I/R (NS)
12 1Cover, CAM (NS)
13 116-0010-00 1Spring, CAM I/R
14 116-0011-00 1Latch, Top Right
15 1Handle, Top (NS)
16 1Shaft Latch, Top (NS)
17 1Spring, Handle (NS)
18 116-0014-00 1Latch, Top Left
20 116-0016-00 1Cover, Rear
21 116-0492-00 2Stud, Top (1 per order)
22 116-0586-00 2Spring, Link (1 per order)
23 116-0963-00 2Link (1 per order)
24 116-0974-00 1Cover, Side, Right
25 116-1322-00 1Cover Assembly, Front Right
26 1Cover, Multi-Purpose Tray (NS, part of Multi-Purpose Tray
99)
27 1Multi-Purpose Tray Slide (NS, part of Multi-Purpose Tray
99)
28 116-1325-00 1Assembly, MPT ,Base
29 116-1326-00 1Cover Assembly, Front Left
30 116-1327-00 1Cover, Side, Left
31 1Cover, Top Stopper (NS)
99 116-1329-00 1Tray, MPT(with 26 and 27)

258 Phaser 6200 Color Laser Printer - Service Manual
PL 2.1 Universal Paper Tray
S6200-229
5
4
23
6

FRU Parts List 259
PL 2.1 Tray, Univeral Paper - FRU Parts List Table
ID No. Part Number Qty Name/Description
1116-1330-00 1Universal Paper Tray (with 2~6)
2116-1331-00 2Paper Feed Roller Kit*
*(2 interchangeable rollers per order)
3116-1332-00 1Assembly, Friction Clutch
4 1 Holder, Retard (NS)
5116-1334-00 1Spring, Retard
6 1 Cover, Front Tray (NS)

260 Phaser 6200 Color Laser Printer - Service Manual
PL 3.1 Paper Feed I
S6200-230
1
2
4
4
4
5
5
5
5
3

FRU Parts List 261
PL 3.1 Paper Feed - FRU Parts List Table
ID No. Part Number Qty Name/Description
1116-1335-00 1Cover, Feeder, Front
2116-1336-00 1Assembly, Turn Chute
3116-1337-00 1Cover, Paper Tray, Rear
4116-1338-00 3Block (1 per order)
5212-0237-00 4Long Screw (M3 x 85) Kit (2 per order)

262 Phaser 6200 Color Laser Printer - Service Manual
PL 3.2 Paper Feed II
S6200-231