Xerox WorkCentre Pro C2128 User manual

Fig. 1-1
Press Access.
Fig. 1-2
Enter passcode and press Login.
Fig. 1-3
Press Access and Accounting.
Fig. 1-4
Press Authentication Mode.
Fig. 1-8
Press Next Open Account.
Note: DO NOT make any changes on Account #1 until you
have recorded the information. If the account #1 information is
forgotten a service call is required.
Fig. 1-6
Press Internal Auditron Setup.
Auditron Settings for Copy/Print - 1 of 4
Fig. 1-5
Press Internal Auditron.
Fig. 1-7
Press User Accounts and Access Rights.

Auditron Settings for Copy/Print - 2 of 4
Quick Start Guide
WorkCentre Pro
C2128/C2636/C3545
Auditron Settings for Copy/Print
Part 1 of 2
Fig. 1-9
Enter User ID.
User ID: ___________
Fig. 1-10
Make changes as needed. Press Close.
Fig. 1-11
Press Exit Tools.
Fig. 1-12
Continue with Auditron Settings for Copy/Print pamphlet Part 2 of
2.

Fig. 2-1
Right click Xerox WorkCentre Pro C3545 PS then click
Properties.
Fig. 2-2
Click Configuration.
Fig. 2-3
Click Accounting.
Fig. 2-4
Click on the down arrow in the Accounting System then select
Xerox Standard Accounting or Auditron.
Fig. 2-6
Click OK.
Fig. 2-5
Click Use Default Accounting Codes and enter Default User
ID. Click OK.
Note: User ID created in Fig. 1-9.
Auditron Settings for Copy/Print - 3 of 4

Fig. 2-7
Click on the File and select Print from your application. Fig. 2-9
Depending on the maachine configuration and features selection
the job will be delivered to one of the output trays available.
Fig. 2-8
Click OK.
Auditron Settings for Copy/Print - 4 of 4
Quick Start Guide
WorkCentre Pro
C2128/C2636/C3545
Auditron Settings for Copy/Print
Part 2 of 2