Xiaguang XP XG2045 User manual

ADSL2+ TesterContents
72-0046-03A 1
Contents
1. Overview..........................................................................................................3
1.1SymbolDescriptions........................................................................................3
1.2ProductOverview............................................................................................3
1.3BasicFunctions..............................................................................................4
1.4MainFeatures................................................................................................5
1.5ProductComposition.......................................................................................6
1.6GeneralSpecifications.....................................................................................8
2. GettingStarted...............................................................................................10
2.1GeneralInformation......................................................................................10
2.2UnpackingCheck..........................................................................................10
3. Manipulation...................................................................................................11
3.1LEDIndicators..............................................................................................11
3.2FunctionalKeyboard......................................................................................13
3.3Preparationsfor Operation..............................................................................15
3.4Brief MenuIntroduction.................................................................................15
3.5CommunicationwithPC.................................................................................16
3.6RechargeableBatteriesandCharge..................................................................17
3.7PowerManagement.......................................................................................20
3.8SafetyPrecautions........................................................................................20
4. NavigatingtheDisplays...................................................................................24
4.1MenuStructure............................................................................................24
4.2 Settings”Menu............................................................................................26
4.3 Results”Menu.............................................................................................41
4.4 Storages”Menu...........................................................................................50
4.5 Others”Menu..............................................................................................53
5. PerformingMeasurements...............................................................................57
5.1Overview.....................................................................................................57
5.2BasicInformation.........................................................................................57
5.3PerformingMeasurements..............................................................................61

ADSL2+TesterContents
72-0046-03A 2
6. Workingwith TestManagerPro........................................................................65
6.1SoftwareFunctions........................................................................................65
6.2SystemConfigurationandRunningEnvironment.................................................65
6.3Install andUninstall the SoftwareonthePC.......................................................66
6.4HowtoUseTestManagerPro............................................................................66
7. Troubleshooting.............................................................................................69
8. Glossary.........................................................................................................70

ADSL2+ Tester1Overview
72-0046-03A 3
1. Overview
Thischapter isintendedtogivefirst-timeusersaquick overviewofthe symbolsusedinthe
manual,themainfunctions,features,compositionsandthe generalspecificationsof
ADSL2+Tester.
1.1 Symboldescriptions
1.2 Productoverview
1.3 Basicfunctions
1.4 Mainfeatures
1.5 Productcompositions
1.6 Generalspecifications
1.1 SymbolDescriptions
Thefollowingsymbolsinthemanualindicateprecautions orinformationwhichmustbe
takentomaintainsafeandrightoperationofthe instrument.
Beforeoperation,the instructionsfollowingabovesymbolsinthe manualmustbefully
understoodandmettoensuretherightandsafeoperationof thisinstrument.
1.2 ProductOverview
ADSL2+Tester isanadvancedhandheldtestsetfor verifyingthatADSL/ADSL2+services
canbeproperlydeliveredfromCentralOfficetosmall andmediumsizedbusinessesor
residentsubscribers.ThisinstrumentmakesdeterminingsuccessfulADSLconnectionsa
Caution”symboldenotes attentiontotheoperationofthe
instrument,which ifnotcorrectlyperformedoradheredtocould
result in failuretothetest ordamagetotheinstrument.Donot
proceedbeyondacaution until theindicatedconditionsarefully
understoodandmet.
Note”symboldenotes somehelpinformationtotheoperationof
theinstrument,whichiffullyunderstoodandmetcouldhelpthe
operatorin performingthetest.
Warning”symboldenotes ahazard.Itcallsattentiontoa
procedure,whichifnotcorrectlyperformedoradheredtocould
resultin injuryorlossoflife,orseriousdamageordestruction to
theinstrument.Donotproceedbeyondawarninguntilthe
indicatedconditionsarefullyunderstoodandmet.

ADSL2+Tester1Overview
72-0046-03A 4
snap.Whetherfor installation,maintenanceand/ortroubleshootingof ADSLcircuits,ILECs,
CLECsandsub-contractingbusinessinstallerswill agreethatthisADSLTester istheright
tool forthe job!Itaccuratelyverifiesthatthelocalloopcancarrythe promisedservice.
1.3 BasicFunctions
ŸAutoline standardset
ŸSupportADSL2+,ADSL2,RE-ADSLandotherregularADSLstandards
ŸADSLLineParametersMeasurements:
üMaximumBitRates:UpstreamandDownstream
üActualBitRates:UpstreamandDownstream
üCapacity:UpstreamandDownstream
üNoiseMargin(SignaltoNoiseRatio): Upstream andDownstream
üOutputPower:UpstreamandDownstream
üAttenuation:UpstreamandDownstream
üBasicphysicalconnectioninformationdisplayed:Linemodulationmode,
channelandconnectionstatus
üSNRandHlogpertone
ŸADSLLinkStatisticsCounters(UpstreamandDownstream):
üSendFrame(SF)
üSendFrameErrors(SFErr)
üLossofSignal(LOS)
üLossof Frame(LOF)
üReed-Solomoncorrections(RS)anderrors(RSCorr)
üCyclicRedundancy Check(CRC)anomalies
üNoCellDelineation(NCD)
üHeaderErrorCheck(HEC)
üOutof Cell Delineation(OCD)
üErrorSeconds(ES),SeverelyErroredSeconds(SES),UnavailableSeconds
(UAS)
üBitErrors
üTotalCells,DataCells,DropCells
ŸADSLLineBERtesting:

ADSL2+ Tester1Overview
72-0046-03A 5
üCountsfortotalBERTbitstested
üCountsforBERTbiterrors
üBitError Ratiostatistics
ŸLoopline measurements(DMM):
üLoopDCandVCvoltage:-400V +400V
üLoopDCcurrent:0 80mA
üLoopresistance:0 40000Ω
üLoopcapacitance:0 2000nF
üIsolationresistance:10MΩ100MΩ
üLooplengthestimation
ŸAuto-testmodeandreal-timestatusdisplay
ŸModemsimulator:
üSimulateADSLCPEmodemcompletely
üSupportmulti-modes:Bridge,PPPoE,PPPoA,MER, IPoA
üReal-timeconnectionratesandthroughputsdisplay
ŸPINGtesting:
üWAN(WideAreaNetwork)PING:IPPING(echoresponse)testsendsasmall
usermodifiableICMPdatapackettoinvestigateifanetworkhostorother
deviceison-line andresponding.SupportpingbothIPaddress anddomain
namedirectly.
üLAN(LocalAreaNetwork)PING:IPPINGthehostPCinLAN.Easy toevaluate
the connectivityofPC.
ŸTracetesting:
üTracethe routeofIPpackets
üDisplaytherouteofIPpackets
ŸThetestresultscanbeuploadedtoPCviathe serialport.AndTestManagerPro
softwarecoulddofurtheranalysis,assembling,filing, andreportoutputtingofthetest
results
ŸOn-lineembeddedsoftwareupgrading
1.4 MainFeatures
ŸEconomical,easy-to-useandsimpletooperate
ŸHighresolutionbacklightLCD,smartnavigationmodeoperationdisplaysinEnglish

ADSL2+Tester1Overview
72-0046-03A 6
ŸHandheldstructure,durabledesign,suitableforcarryingaroundandon-spot
measurements
ŸEmbeddedwithBroadcomchipset,goodcompatibility
ŸComplywithmulti-standards: ITU-TG.992.1(G.DMT),ITU-TG.992.2(G.lite),ITU-T
G.992.3(ADSL2),RE-ADSL,ITU-TG.992.4(Splitterless ADSL2),ITU-TG.992.5
(ADSL2+),ITU-TG.992AnnexA,AnnexB,AnnexC(FBMandDBM),ANSIT1.413
Issue 2,YDN078-1998
ŸSupportmulti-protocols:PPP overATM(PPPoA),PPPoverEthernet(PPPoE),
RFC-1483Bridge(BRIDGE),IPoverEthernetoverATM(MER),IPoverATM(IPoA)
ŸEasilyconfirmthesuccessfuldeliveryofADSLservicesatthecustomerpremiseor
anywherealongthelocalloop
ŸSupportbothWANPINGandLANPING
ŸSupportreplacingmodemandsimulatingthewholeprocessofloginoninternet.
Real-timedisplayupstream anddownstreambitrateandthroughput.
ŸAttachedclampcable,LANtestcable(directandintercross)canbeconveniently
connectedtothetelephonetwistwiresandEthernetcardofPC.
ŸBuilt-inNiMHrechargeablebatteriesandembeddedwithsmartfastcharger circuit.
Canbechargedwithautomobilecigarettelighterbatteryadapter.
ŸFieldreplaceableandrechargeableNiMHbatterymodule.
ŸBeepandLEDsalarmandstatusindicatorsindications.
ŸHighstoragescapacity,canstoreupto10groupsoftestsettingsincludingand50
groupsoftestresultsinformation.
ŸAuto-shutfunction
ŸReal-timeclock andstoragescouldbekeptduringalongtimebypowersupplyofthe
secondsparebatterywithoutACadapterandbuilt-inNiMHbatterymodule.
ŸByusingTestManagerProsoftware,upgradingtheembeddedsoftwareofthe tester
viatheserialporttoperfectthefunctionalitiesandprotectyour investment.
1.5 ProductComposition
ADSL2+Testerisconsistsof belowmodules:
ŸHardware:Mainboard, Powerboard,Displayboard.
ŸSoftware:EmbeddedsoftwareandPCsoftware--TestManagerPro.
ŸAccessories:Waterproofpackage,Testcables,ACpoweradapter,Rechargeable
batteries,Automobilecigarettelighterbatteryadaptercable,andetc.
1.5.1 Appearanceandaccessories ofthetester

ADSL2+ Tester1Overview
72-0046-03A 7
ŸFacepanel:LCDdisplay,LEDalarmandstatusindicators,keyboard
ŸBackpanel:fourfrangiblelabelsandserialnumberlabel
ŸFrontpanel:ADSLinterfacesconnector,LANinterfaceconnectorand12VDC input
jack
ŸRearpanel:Endcover.Presstheshrapneltounpackthe endcover,andyoucansee
thebatterycompartmentandRS232portjack.
SeeFig1(Appearanceof thetester).
Fig1:AppearancesofADSL2+Tester
1.5.2 Accessories ofADSL2+Tester
ŸWaterproofPackage
ŸADSLTestCables
ŸLANTestCables
Battery
Compartment&
Rechargeable
NiMHBatteries
(Inside)
ADSLLine&
DMMInterface
LANInterface 12VDC
Input
LCDDisplay
AlarmandStatusIndications
FunctionalKeyboard
RS-232Interface
(Inside)
DMM
Interface
EndCover
(Knock-down)

ADSL2+Tester1Overview
72-0046-03A 8
ŸACPowerAdapter
ŸRS-232CommunicationCable
ŸAutomobileCigaretteLighterBatteryAdapterCable
ŸTestManagerProSetupCD
ŸUser’sManual
SeeFig2(Appearanceofthetester).
Fig2:AccessoriesofADSL2+Tester
1.6 General Specifications
ThegeneralspecificationsofADSL2+TesteraredescribedinTable1.
Item Descriptions
ADSL LineConnector RJ11
Ethernet Connector RJ45@100Ω
DMM Connector Φ4BananaConnector
LineCode DMT
DownstreamRates
Supported 24Mb/s
UpstreamRate
Supported 1.2Mb/s
Transmission Distance
Supported 6.5km
AlarmandStatus
Indications
LINEPARAMETER,LINEBERT,PING/TRACE,MODEMSIMULATOR,
DMM,START/STOP,ALARM,WANLINK,WANACTIVE,LAN
LINK/ACTIVE,CHARGE,LOWBATTERY
WaterproofPackage ACAdapter
RS
-
232
CommunicationCable
ADSLTest
Cables
AutomobileCigarette
LighterBatteryAdapter
TestManagerProSetupCD
andUser’sManual
LANTest
Cables
DMMTest
Cables

ADSL2+ Tester1Overview
72-0046-03A 9
StandardsSupported
ITU-TG.992.1(G.DMT),ITU-TG.992.2(G.lite),ITU-TG.992.3
(ADSL2),RE-ADSL,ITU-TG.992.4(SplitterlessADSL2),ITU-T
G.992.5(ADSL2+),ITU-TG.992AnnexA,AnnexB,AnnexC
(FBM/DBM),ANSIT1.413Issue2,YDN078-1998
Encapsulation
Supported
PPP overATM(PPPoA),PPP overEthernet(PPPoE),RFC-1483
Bridge(BRIDGE),IPoverEthernetoverATM(MER),IPoverATM
(IPoA)
Services Supported ATM、UBR、VBR、CBR
SerialPort RS-232C
Rechargeable
Batteries 5×1.2V AA NiMHbatteries,continuousworkingfor2.5hours
RechargingTime Embeddedwithfastre-charger,rechargingtime1.5hours,finish
rechargingautomaticallywhen beingfullcharged.
ACPowerAdapter Input:AC100V-240V,50/60Hz
Output:DC12V/1.5A
TestManagerProWIN98/ME/2000/NT/XP
Operating
Temperature 0°C~50°C
Humidity 5%~95%non-condensing
Dimensions L×W×H243mm×90/128mm×60mm
Weight Approx.700g
Table1:Specificationsof ADSL2+Tester

ADSL2+Tester2GettingStarted
72-0046-03A 10
2. GettingStarted
Thischapterisintendedtointroduceunpackingcheckandattentionpointsinsummary.
2.1 GeneralInformation
2.2 UnpackingCheck
2.1 GeneralInformation
Inordertosafelytransport,ADSL2+Tester ispackagedbycarton.Andall theaccessories
includingUser’sManual,CD,QualityCertificateCard,MaintenanceCardareplacedinthe
waterproofpackage.
2.2 UnpackingCheck
Pleasecheckwhenreceivingtheproduct:
•If the packingcartonisimpairedandif theappearanceoftheproductisimpaired.
•If the instrumentandall itsaccessoriesareavailable.
The standardconfigurationlistofADSL2+TesterisshowninTable2.
Item Qua.
Item Qua.
ADSL2+Tester 1 TestManagerProSetupCD 1
LANTestCable(Direct,Black) 1
LANTestCable(Intercross,Grey) 1
AutomobileCigaretteLighterBattery
AdapterCable 1
ADSLTestCable(RJ-11) 1 WaterproofPackage
1
ADSLTestCable(Clamp) 1 User’sManual 1
DMMTestCable 2 Maintenancecard 1
RS232CommunicationCable 1 QualityCertificateCard 1
ACPowerAdapter 1 PackingList 1
Table2:StandardconfigurationlistofADSL2+Tester
Caution:
Pleasechecktheconfigurationsofinstrumentitembyitemaccordingtothe
packinglist.Pleasecontactyourvendorif anythingisunavailable.
Pleasefill intheproductmaintenancecardcarefullyandtakegoodcareofit.
Ifnecessary,keepthe packingmaterialsincasetheywill beneededsome
time.

ADSL2+ Tester3Manipulation
72-0046-03A 11
3. Manipulation
ThischaptermainlyintroducesthealarmLEDindicators,functionalkeyboard,the
preparationsforoperation,brief menuintroduction,communicationwithPC, charge,power
managementandsafetyprecautioninsummary.
3.1 LEDIndicators
3.2 FunctionalKeyboard
3.3 PreparationsforOperation
3.4 Brief MenuIntroduction
3.5 CommunicatewithPC
3.6 RechargeableBatteriesandCharge
3.7 PowerManagement
3.8 SafetyPrecaution
3.1 LEDIndicators
ADSL2+Testerhas10alarmand2statusLEDindicators.TheredLEDsflashtoindicatethat
anyerrororalarmconditionswhichoccurredcurrently.Alltheindicatorswillbedescribedas
below.
3.1.1 StatusLEDs
•LINEPARAMETER”functionalLED
If youselect LineParameter”functiontotest,thisLEDwill belitgreen.ThisLED
mainlyindicatesthatthe currentselectedtestfunction.
•LINEBERT”functional LED
If youselect LineBERT”functiontotest,thisLEDwill belitgreen.ThisLEDmainly
indicatesthatthecurrentselectedtestfunction.
•PING/TRACE”functional LED
Ifyouselect PING”or Trace”functiontotest,thisLEDwill belitgreen.ThisLED
mainlyindicatesthatthe currentselectedtestfunction.
•MODEMSIMULATOR”functionalLED
If youselect MODEMSimulator”functiontotest,thisLEDwill belitgreen.This
LEDmainlyindicatesthatthecurrentselectedtestfunction.
•DMM”functionalLED
If youselect DMM”functiontotest,thisLEDwill belitgreen.ThisLEDmainly
indicatesthatthecurrentselectedtestfunction.

ADSL2+Tester3Manipulation
72-0046-03A 12
•START/STOP”statusLED
Tostartorstopthetestcanbeswitchedbypressing Start/Stop”key.Andin
Start”status,LEDislitgreencontinuously.In Stop”status,LEDwillbeturnedoff.
•WANLINK”statusLED
ThisLEDindicateswhetherornotWANlinkisnormallyconnected.
Light: Itindicatesthatthe testerhaslinkedtoATU-C.
Flash slowly: Itindicatesthatthe testeristryingtobuildlinktoATU-C.
Flash quickly: Itindicatesthatthe tester ishandshakingwithATU-C.
Wink: ItindicatesthatthetesterhasunlinkedtoATU-C.
•WANACTIVE”statusLED
ThisLEDindicatesaWANactivestate.
Flash: Itindicatesthatthe testeris transmittingdatatoATU-C.
Wink: Itindicates thatnodatatransitions between thetesterandATU-C,orthe
ADSLlineisinterrupted.
•LANLINK/ACT”statusLED
ThisLEDindicatesaLANlinkandactivestate.
Light: Itindicatesthatthe testerhaslinkedtoLAN,andtherehasnodata
transitionsbetweenthe testerandLAN.
Flash: ItindicatesthattherearedatatransitionsbetweenthetesterandLAN.
Wink: Itindicatesthatthetesterunlinks toLAN
•CHARGE”statusLED
TheLEDlightsorangewhenthebatteryisbeingcharged.XG2040embeds
rechargeablebatteriesandsmartfastchargercircuit.AndLEDwill beturnedoff
after fullycharged.
3.1.2 AlarmIndicators
•ALARM”LED
Light: WhenthisLEDislitred,itindicatesthatthetesterlinkstoATU-C
unsuccessfullyorothererrorshappenedsuchasthe parameters
breakthroughthethresholds.Otherwise,thisLEDwillbeturnedoff.
•LOWBATTERY”LED
ThisLEDlightsredwhenbuilt-inNiMHbattery’svoltagehasdroppedtoalowlevel
withoutexternalpowersupply.TheLEDwillbeturnedoffwhenthe batteryis
chargedbythe externalpowersupply.ThisLEDwithredindicatesthatthe testerwill

ADSL2+ Tester3Manipulation
72-0046-03A 13
automaticallyshutdown soon.
3.2 FunctionalKeyboard
ADSL2+Testerhas16functionalkeysatthefrontpanel,includingmainfunctionalkeys,
softkeys,cursorkeys,pagekeys,abacklightkey,apower switchkey,astart/stopkey,a
autotestkey,etc.Thearrangementof functionalkeysandnamesof keysfromlefttoright
areasshowninFig3.
ThesefunctionalkeysaredescribedasinTable3.
`
Fig3:Functionalkeyboard
Caution:
Thekey-strokebeepcanbesetas ON”or OFF”in Others”menu.When
the key-strokebeepissetas ON”,therightkey-strokeleadstoonebeep
whilewrongor invalidkey-strokeleadstotwobeeps.Asprompt,therewillbe
relevanthintinformationinLCDdisplayatthesametime.
KeyName Description
Softkeys Identifiedas F1”to F4”,usedtoselecttheparameteroractivityin correspondinghighlightplaceatthebottomofLCD. EachLCDdisplay
definesoneormorefunctionsofthesesoftkeys.
Setting”Matchedwiththe Settings”menu.Whenthiskeyispressed,LCDdisplay
switchestothe Settings”menu.
Result”Matchedwiththe Results”menu.Whenthiskeyispressed,LCDdisplay
switchestothe Results”menu.
Storage”Matchedwiththe Storages”menu.Whenthiskeyispressed,LCD
displayswitchestothe Storages”menu.
Other”Matchedwiththe Others”menu.When thiskeyispressed,LCDdisplay
switchestothe Others”menu.
F1
F
2
F
4
F
3
SETTIN
G
RESULT
STORAGE
OTHER
AUTO
TEST START
STOP
Softkeys: F1”, F2”, F3”, F4”
Setting”, Result”, PgUp”, Cursor
moveableleftandup”key
Storage”, Other”, PgDn”, Cursor
moveablerightanddown”key
AutoTest
”, Start/Stop”,
Backlight”, Power”key

ADSL2+Tester3Manipulation
72-0046-03A 14
AutoTest”
In LineParameter”testmode,pressthiskeytoautostartthe testwith
the AUTO”linestandard. Andthedisplays of LCD will switch to Result”
menu directly.In DMM”testmode,pressthiskeytoautodetectandtest
theloopline.
Start/Stop”Manuallycontrol thestartorstopactivityofthetest.Press ittostartthe
testandpress itagaintostopthetest.
PageUp”Whenpagenumber appearsinthe displaymenu(Like P: 2/4”,indicates thatdisplaymenuhas4pagesinall andisonpage2currently),pressthis
keytogopageup.
PageDown”Whenpagenumber appearsinthe displaymenu(Like P: 2/4”,indicates thatdisplaymenuhas4pagesinall andisonpage2currently),pressthis
keytogopagedown.
Cursor
MoveableLeft
andUp”
Movethe cursorupwardandleftwardandthecursorcanreachtheposition
with []”.
Cursor
MoveableRight
andDown”
Movethe cursordownwardandrightwardandthecursorcanreachthe
positionwith []”.
Backlight”Turnonor offthe LCDbacklightaccordingtothelightcondition.
Power”Switchonor off the instrument.
Table3:Functionalkeysdescriptions
Caution:
Pressing AUTOTEST”keycanautostartthe ADSLlineparametertestinany
operatingmenuofthe tester,exceptfor DMM”testingmode.The displays
will bedirectlyswitchedintothe resultmenuof LineParameter”andthe
Start/Stop”LEDwill beturnedon.Inthiscondition,thelinestandardwill be
automaticallysetas AUTO”.
Caution:
The key-strokebeepcanbesetas ON”or OFF”in Others”menu.When
thekey-strokebeepissetas ON”,therightkey-strokeleadstoone beep
whilewrongor invalidkey-strokeleadstotwobeeps.Asprompt,therewillbe
relevanthintinformationinLCD displayatthe sametime.

ADSL2+ Tester3Manipulation
72-0046-03A 15
3.3 PreparationsforOperation
nAfterunpacking,check ifthe cartonorthe appearanceof thetesterisdamagedor
not.
nCheckif the tester anditsaccessories areintegratedornot.
nPlugtheACadapterintoanappropriateACwalloutlet.Andconnectthetesterwith
ACpoweradaptercable,checkifthe Charge”status LEDwill belit.
nPress Power”keytoswitchonthetester,LCDscreen will displaytheLOGOof
manufacturerandtheembeddedsoftwareversion.After 3seconds,buzzerwill beep
once,thesoftwarewill beloadedcompletelyandthetester isinitializingforabout20
seconds.
nSelectthefunctionwhatyouwanttotest,andlinkthe testcablebetweenthetester
andthe lineunder test.
Aftermakingabovesteps,youcanconfiguresettingsandmakethe
measurements.
3.4 BriefMenuIntroduction
The operatingmenusofADSL2+Testerinclude Settings”, Results”, Storages”and
Others”menu,matchedwiththe Setting”, Result”, Storage”and Other”functional
keysrespectively.Thesefourmenuscanbeswitchedfromone toanotheratanytimeby
pressingthesefour functionalkeys.
PgUp”and PgDn”keysprovidepageupanddownfunctions, CursorMoveableRight
andDown”and CursorMoveableleft andUp”keysprovidecursormovementfunctions,
F1”, F2”, F3”, F4”softkeysareusedtoselecttheparameteroractionsatthe bottomof
LCDwhichmatchedwiththeplacehighlightedbythecursor.
Ineachof displayareasthe fieldcurrentlyabletobechangedismarkedbya Highlight
Cursor”.The menu ofselectionavailableforthe activefieldisdisplayedonsoftkeysonthe
bottomofthe display.The choice fromthe menuismadeusingthekeys situated
immediatelybelowthedisplay.Thehighlightedcursorismovedaroundthedisplayusing
pageandcursorkeys.Whenahighlightedfieldhasmorethan5choicesasoftkeylabeled >>
isprovided.When >> ischosentheremainderofthe menu isrevealed.
nSettings”Menu
Pressthe Setting”keytoenterintothesettingsmenu.All the informationthatrelatedto
the chosentestfunctionandthesettingofthe parametersareprovidedinthe Settings”
menu.Pressthe CursorMoveableRight andDown”and CursorMoveableleft and
Up”keystomovethecursor,press the F1”, F2”, F3”and F4”softkeystoselectthe
correspondingparameters.Incasepagenumberappearsinthe LCDmenu,suchas P: 1/2”,
turnpagebypressingthe PgUp”or PgDn”key.Pressthe Start/Stop”keytostartthe

ADSL2+Tester3Manipulation
72-0046-03A 16
testafterall the settingshavealreadybeenconfiguredcompletely.
nResults”menu
Pressthe Result”keytoswitchtothe resultsmenu.All theinformationthatrelatedtothe
resultstatistics,performanceanalysisandmeasurementreadingsareprovidedinthe
Results”menu.F1”, F2”, F3”, F4”softkeys areusedtoselectvarioustypesofresult
analysisandstatistics.Incasepagenumberappearsinthemenu,suchas P:1/2”,thenthe
pagecanbeturnedbypressingthe PgUp”or PgDn”key.
nStorages”menu
Press the Storage”keytoswitchtothestoragesmenu.Pressthe CursorMoveable
RightandDown”and CursorMoveableleft andUp”keystoselectstorage’sname,
pressthe F1”, F2”, F3”, F4”softkeystoview,delete,lock,unlock,renameanddoother
actions tothesettingsandresultsofthestoredrecord.Inthestoredresults,thesettings
andresultsinformationof atestareavailable.
nOthers”menu
Pressthe Other”keytoswitchtotheauxiliaryinformationmenus.In Others”menu,it
providesthesettingsandexaminationtotheauxiliaryfunctionsandinstrument.Following
auxiliaryinformationmenuscanbeaccessedbypressingthe F1”, F2”, F3”and F4”
softkeys,including Miscellaneous, PowerManagement, Time&Date, RS232 Port,
KeyboardTest, Self-test, TesterInformation.
Duetothe workingcircumstances,the status promptinformationlinewhich is
abovethehighlightedfieldprovidesoperatingstatusofthe instrument.
The upperrightcornerofLCD Дindicatesthattheparameterscanbe
modified, ϔindicatesthatthe instrumentiscurrentlydoingonetest,
softkeysareunderthelockstatus,andthehighlightedsettingscannotbe
modified.
Дinthe Storages”menuindicatesthattherestillhasstoragespaceto
savemorerecordsintheinstrument.
ϔindicatesthatnosavingspaceis
available,somerecordsmustbedeletedfirstlytosavethenewrecords. Д
and ϔfollowingeachsavedrecordrespectivelyindicatethattherecordis
underlockedorunlockedstatus.
3.5 CommunicationwithPC
ThistestersupportscommunicationwithPCviaRS232Cinterface byTestManagerPro
software.AndTestManagerProcandotwojobs:oneistouploadthetestresultsstoredin
theinstrumenttoPCfor further processingincludingfiling,printingandanalyzing,andthe
otheristoupgradethe embeddedsoftwareviaPCtoprotectyourinvestment.
3.5.1 Communication Steps

ADSL2+ Tester3Manipulation
72-0046-03A 17
•Switchoff thetesterfirstly.
•Opentheendcoverof thetester.
•ConnectRS232interfaceofthe testertoPCserialportwithRS232communication
cable(supplied).
•Switchonthetester.
•SetRS232portstateto ON in Others”menu.
•Runthe TestManagerProsoftwareonPC,click Select”buttontochoosethetester’s
typeandclick Connect”button.Afterthe successfulconnection,theuser canupload,
view,analyze,delete,printtestresultsintheformof reportanddootheroperations.
•Switchoff thetesterafter communicationwithPC.
•PullouttheRS232communicationcable.
Warning:
Besurenottoplugandunplugthecommunicationcablealivewhen
connectingPCserialinterfacetothe testerusingtheserialcommunication
cable,andbesuretogroundoruseESDwriststrip.Plugandunplugthe
communicationcablealivemayresultindamagetoPCortheserialinterface
of thetester.
3.5.2 UpgradingtheEmbeddedSoftware
Manufacturerwill launchthelatestversionembeddedsoftwareandhostsoftware
TestManagerProinthewebsiteofourcompanyfor the userstodownload.Makesureto
visitourwebsitefrequentlytoensureyouwill always getthesoftwareoflatestversion.
Forthesoftwareupgradingmethod, pleaserefertotherelevantpartof Communication
with PC”andfollowinstructionsof the TestManagerPro.
Caution:
Whenperformingtheembeddedsoftwareupgrading,inordertopreventthe
instrumentpoweredoff causedbythebatteryexhausted,itisstrongly
recommendedtouse externalACpowersupplytopower the tester.
3.6 RechargeableBatteriesand Charge
Therechargeablebatterieswill typicallypower thetester formorethan2.5hourswiththe
backlightandtestingmodeselected. Thetesteruses5high-performance2300mAHNickel
MetalHydride(NiMH)rechargeablebatteriesplacedinthebatterycasethatmaynotbefully
chargedwhentheuserreceives the tester.Whateverthestateofcharge,use thetesteruntil
the batteryiscompletedexhaustedbeforegivingititsfirstcharge.Thiswillensurebetter
accuracyfromthebatterychargeindicator.

ADSL2+Tester3Manipulation
72-0046-03A 18
Warning:
Donotchangethebatterymodel!
Donotuseoldandnewrechargeablebatteriestogether!
Donotusenon-rechargebattery,incasethatmaycausethebattery
explosionorother danger.
Caution:
Whenthe batterysuppliedforthistesterhasbeenusedexpiringthecharging
lifeor areimpaired,theyshouldbedealtwithcontrol.If dealtwithgeneral
wasteprocessingsystemdetainedinthe tester,theywill harmthetester.The
wastebatteriescontainNickel-MetalHydrideandmustberecycledor
disposedofproperlyatspecialrecyclingstationorhazardouswastecollection
center.
nReplacementofRechargeableBattery
Anewrechargeablebatterycanbechargedanddischargedforabout800~1000 times
beforeitcannotbeusedanymore.Normallythefullychargedbatteriescouldsupportthe
testercontinuous2.5hoursworkingdependinguponthetestsettings.So whenthe
operatingdurationof thebatteryisapparentlyreduced,thebatteriesshouldbereplaced.
Itisstrongrecommendedthatthe rechargeablebatteriesshouldbereplaced
everyoneor twoyears!
TheNiHMrechargebatterymaybecomeinvalidafternousedforalongtime.
Itcanonlybereusedafterreactivation.
nMethodofBatteryReplacement
Ensurethetesterisswitchedoff firstly.Andopentheendcover ofthe testerandslightly
pressthebatterycompartmentlockcarddownward,thebatterycasewill popout.Extract
thebatterycompartmentandunscrewthescrewsonthetopofthecasetoopenandreplace
newbatteries(Becarefulofnotmistakingthe polarityofthebattery).Whenthebattery
compartmenthasbeenloadedagain,slipitbackintothe batterycase frameandpushthe
batterycompartmentinside(Putyour fingersuponthecaseratherthanthebatterycase
lock card),thebatterycaseisinstalledwell whilea KaTa”soundisheard. The battery
replacementiscompletedwhentheendcoverof thetesterismountedagain.
Warning
Wheninstallingthebatterycompartmentbacktothe batterycaseframe,
pleaseensurenottopushoverexerted,whichifnotwill resultinimpairingthe
batterycaseframeor makingthe batteryshrapneldamaged!

ADSL2+ Tester3Manipulation
72-0046-03A 19
Thebatteryreplacementshouldbestrictlyconformedtothebelowinstructions.
ØSwitchedoffthetesterfirstly.Press A
and Bsimultaneouslywithyourfingers
andpull the endcoverofthe tester.Then
pressthebatterycompartmentlockcard
Cdownwardslightlyandtakeoutthe
batterycase.
ØUnscrew thescrewsonthe topofthe
casetoopenthe coverofthe battery
case.
ØReplacethe newbatteriesaccordingto
thepolarityindicationswhichareprinted
inbottomofthebatterycase.
ØInstall thecoverbackandre-screwthe
screwstightly.
ØSlipthebatterycasebackintothe
batterycaseframeandputyourfingers
upon Dand Etopushthe battery
compartmentinside.Thebatterycaseis
well installedwhilea KaTa”soundis
heard.Thebatteryreplacementis
completedwhen the endcoverofthe
tester ismountedagain.
nChargingtheBattery
Torechargethe battery,pluginthechargerusinganappropriateadapter(supplied).
Normallythe batterywill befullychargedafter2.5hours.Inexceptionalcircumstances
wherethebatterymayhavebecomedeeplydischarged,achargetimeof24hoursmaybe
required.Notethatthe testercanbeusedwhilethebatteryischarging.Duringrapid
charging, the Charge”LEDindicatorturnson.Whentherapidchargingiscompleted,
chargingautomaticallyturnsintoatricklecharge,the Charge”indicatorturns off.The
testercertainlycanbechargedwhenitispoweredoff.Thechargingindicatorcangivethe
rightdisplay.
Inaddition,thebatterycanberechargedwiththe automobilecharger,atthistimean
automobilecigarettelighter adaptercableisneeded.
C
D
E
A
B

ADSL2+Tester3Manipulation
72-0046-03A 20
nLowBattery”Indication
Whenbeingpoweredbythebattery,thistestercangivetheearlyalarmtolowbattery
voltageandthe LowBattery”indicatorturnson.After beingusedforacoupleof hours,
thebatteryvoltagecontinuestodroptoalowlevel,andthe testerwillautomatically
performprotectiveshutdown.Whenthe LowBattery”indicatorturnson,the external
power supplyisneededtosupportthe testerworkingwhilethebatteryischarging.
3.7 PowerManagement
Thistesterprovidesautomaticpower-offfunction.When thetesterisnotundertest-started
statusandthereisnokeystrokein5minutes,thistesterwill beturnedoff automatically.
Thisfunctioncaneffectivelypreventthetesterfrombeingaccidentallyturnedonandthe
batteryfrombeingexhaustedduringthetransport.Thisfunctioncanbesetto ON or OFF in
Others”menu.
The LCD backlightcanbeturnedonbypressingthe Backlight”key,andbeautomatically
turnedoffin30seconds.Thisfunctioncanbesetto ON or OFF in Others”menu.Whenset
as OFF,pressthe Backlight”keytoturnonthe backlight,andpressthe Backlight”key
againtoturnoff thebacklight.
3.8 SafetyPrecautions
Thefollowinggeneralsafetyprecautionsmustbeobservedduringall phasesofoperation,
service,andrepairofthisinstrument.Failuretocomplywiththeseprecautionsorwith
specificwarningselsewhereinthismanualviolatessafetystandardsofdesign,manufacture,
andintendeduseoftheinstrument.Themanufacturingcompanyassumesnoliabilityfor
thecustomers’failuretocomplywiththese requirements.
Warning:
Donotoperatedamagedequipment:Whatever itispossiblethatthesafety
protectionfeaturesbuiltintothisproducthavebeen impaired,eitherthrough
physicaldamage,excessivemoisture,oranyotherreason,removepowerand
donotusetheproductuntil safeoperationcanbeverifiedbyservice-trained
personnel.Ifnecessary,returntheproducttoyourvendor andserviceoffice
forserviceandrepair toensurethesafetyfeaturesaremaintained.
3.8.1 ExternalPowerRequirements
PleaseusethesuppliedACadapterwhenoperatingwiththeinstrumentorchargingthe
battery.ThesuppliedACpower adapter requiresapowersourceof 100Vto240V ACata
frequencybetween50Hzand60Hz(nominal).
ACInput: 100V~240V,50/60Hz,Max0.45A.
The ACadapterwill outputaDCpowerof12Vtothe instrument.