Xiaomi Mi Air Purifier Pro H User manual

Mi Air Purifier 3H UserManual
Mi Air Purifier Pro H User Manual

Warning
•Turnoffandunplugthepurifierbeforemovingit.
•Thepurifiercannotturnonwhenthefangrilleandthefiltercompartmentcoverarenotinstalledproperly.
•Maintain a distance of at least 20 cm between the air inlets and walls or other objects.
• Frequently remove dust, hair, and other particles from the outer mesh screen of the filter, so as to reduce the
chance of bacteriagrowth.
•Remove dust, hair, and particles from the purifier's air inlets to prevent a reduction of air intake.
•Cover the air outlet toprevent dust, hair, and other particles from falling in when the purifier is le€ unused for a
long time.
To avoid fire, electric shocks, or other damage, use the power cord and electrical outlet as instructed below:
• Do not excessively pull, twist or bend the power cord, as this may expose or break the cord's core.
•The power cord must be plugged into a suitable electrical outlet.
•Usethe power cord that was provided with the purifier, do not use any third party power cords.
•Always unplug the purifier before carrying out maintenance to or moving the air purifier.
•Whenthepowercordisdamaged, itmustbereplacedwithagenuinepower cordpurchasedfromthe
manufacturer or a€er-sales service department.
•Immediately stopusingthepurifierwhenitmakesunusualsounds,givesoffbadodors,overheats,oritsfan
rotates irregularly.
•Donot stick your fingers or foreign objects into the protective parts, movable parts, air inlets, or air outlets.
•Keep objects such as hairs or fabrics away from the purifier to avoid blocking the air inlets or air outlets.
•Do not sit on, lean on or tilt the purifier.
• When using in conjunction with gas-fueled appliances (such as gas stoves, gas heaters), please ventilate
sufficiently to avoid carbon monoxide poisoning.
•Do not pour liquids, nor throw powders or other small substances into the purifier's air outlet.
Donot use thepurifierinthe following circumstances, asthey mayresult in electric shocks, fire, orother
damage:
• Near open flames, such as candles, incense burners, stoves, fireplaces, cigare’es, firecrackers, lighters, multi-
purpose torches, candle lighters, or fire pans.
•Nearappliancesthatgeneratehightemperatures,suchaselectricheaters,fanheaters,electricfootwarmers,
electric stoves, electricirons.
•Make sure no inflammable objects get into the purifier.
•Inunstable locations where the purifier can easily fall over.
•Inenvironments that are extremely hot, humid, or damp, such as bathrooms.
• This appliance can be used by children aged from 8 years and above and persons with reduced physical,
sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or
instruction concerning use of the appliance in a safe way and understand the hazards involved.
•Children shall not play with the appliance.
• · Cleaning and user maintenance shall not be made by children without supervision.

Fan Grille
OLED Display
On/Off &Mode
Bu’on
Display On/Off
Bu’on
FanGrille
OLED Display
On/Off &Mode
Button
Display On/Off
Button
Product Overview
Read this manual carefully before use, and retain it for future reference.
Note: Illustrations of the product, accessories, and user interface in this user manual are
for reference purposes only. The actual product and functions may vary due to product
enhancements.
Temperature &
Humidity Sensor
Laser Particle
Sensor
Filter
Compartment
Cover
Front
Rear Power Cord
Connector

025
PM2.5
Temperature
25 X 60 %
Mode
Humidity Automatic: Automatically switch
modes according to the indoor air
quality.
Sleep: Ultra-low noise for a
On/Off & Mode Bu’on comfortablesleepingenvironment.
Low speed
Air Quality Indicator
One of the colors belowwill display Medium speed
accordingtothe PM2.5value High speed
Green 0-75•g/m3 Manual: Set and save the coverage
Orange 76-150•g/m3 area and the purifying efficiency in
Red 150 •g/m3orhigher the app.
Wi-Fi
Product Overview
Display
Mi Air Purifier Pro H
Display On/Off Button On/Off & Mode Button
Mi Air Purifier F1
Display On/Off Button On/Off & Mode Button

Installation
Openthefilter
compartment
Pressthebuckletoopenthe
filtercompartment,and make
sure the filter is installed
correctly.
Remove the power cord
package
Remove the power cord
package,andclosethefilter
compartment.
Connect to an outlet
Connect the power cord
to the connector at the
bo’om of the purifier, and
then plug it into an outlet.
1
3
2

Press the bu’on on the back of the
purifier to adjust the display's brightness,
or to turn the display on/off.
How toUse
Placing the purifier inasuitable
location
For optimal performance, maintain the
recommended distances between the
purifier,andwallsandotherobjects(refer
to the illustrationabove).
Note: It is recommended to keep doors and
windows closed for a be’er purifying effect when
using the purifier.
On/Off & Mode Bu-on
Tap to turn on the purifier, then tap to
switchmodes. Pressandhold fortwo
secondsto turn off the purifier.
Display On/OffBu-on
Press the button to adjust the display’s brightness,
or to turn the display on/off

Rese-ing Wi-Fi
When the phone cannot connect to the
purifier, simultaneously press and hold
the On/Off & Mode bu’on and the Display
On/Off bu’on for five seconds. Once you
hear a beep, the purifier's Wi-Fi has been
reset successfully.
ConnectwithMiHome / Xiaomi
Home App
ThisproductworkswithMiHome/Xiaomi
Home app*. Control your device with Mi
Home / Xiaomi Home app.
ScantheQRcodetodownloadand
install the app. You will be directed
to the connection setup page if the
app is installed already. Or search
"MiHome / Xiaomi Home" inthe app
Store todownload andinstall it.
OpenMiHome/XiaomiHomeapp, tap"+"ontheupper
right, and then follow prompts to add your device.
*The app is referred to as Xiaomi Home app in Europe
(except for Russia). The name of the app displayed on
your device should be taken as the default.
Note: TheversionofMiHomeappmighthavebeen
updated, pleasefollowtheinstructions basedonthe
current appversion.
Filter StatusNotifications
Filter Installation
Notification
No filter detected, or the installed
filter is not genuine.
Filter ServiceLife
Notification
When the purifier detects that
the filter's service life is more
than10%,eitherunplugandplug
in the power cord again then turn
onthepurifier, or open and close
the filter compartmentthen
turn on the purifier, the filter's
remainingservicelife(in%)will
appear on the display.
Filter Replacement
Notification
Thefilterreplacement period
is 6–12 months. If the filter's
servicelifeis10%orless,the
display will show a QR code and
the filter's remaining service life
(in %) whenever you turn on the
purifier.
Note:RefertotheFilterReplacement
instructions on the inside of the filter
compartment cover.
Note: The filter may produce odors when it absorbs
excessive harmful gases. It is recommended to store
the filter in a place with good lighting and ventilation to
improve the activity of the activated carbon and restore
itsparticleadsorptioncapacity.Pleasereplacethefilter
when its recommended service life is due.
1
2
3
Install an
genuine filter
Filter
remaining
90%
Filter
remaining
2%

Illustration A
Care &Maintenance
Make sure the purifier is turned off and unplugged.
Cleaning the filter compartment
Useavacuumcleaneroraso€ clothto
remove any dust from the air inlets or
thefiltercompartment,soastoensure
optimal ventilation andpurification.
Cleaning the laser particle sensor
Thelatchoftheparticlesensor'scoveris
located just above the inside of the filter
compartment. Remove the cover, by
pushingafingerupagainstthelatch(as
shown in IllustrationA).
Use an air blow gun or a hair dryer to
cleanthecoverandthesensor(asshown
in IllustrationB).
Note: Do not use hot air.
Illustration B