XLOCK 186 User manual

XLOCK 186
Installation Guide
MTA_9 344 290 00

Battery 2CR5,
6V lithium battery
Lock
XL186
Closing part
XL-S2
2
Attention:
Please order matching
locking part
separately.
1 pcs 4,0 x 55 mm
2 pcs 4,0 x 35 mm
4 x Linshead 3 x 12 mm.
Keyboard
XL186
PACKAGING CONTENTS
Always use lithium batteries!
Attention:
Please order batteries
separately.

3
Lock
XL186 Closing part
XLS2
Keyboard
XL186
DIMENSIONS

Closing parts
Optional ! Please order separately.
XLOCK Closing part
XL-S2B
incl. fixing material full metal
roller predetermined
breaking point (definable)
XLOCK Closing part
XL-S1
incl. fixing material full metal
roller predetermined breaking
point (definable)
XLOCK Closing part
with ejector
XL-S0
incl. mounting material
XLOCK Closing part
XL-ZS4-B
incl. mounting material full
metal roller 3 fixing points
XLOCK Closing part
XL-ZS4-B
incl. mounting material full
metal roller 3 fixing points
XLOCK Closing part
XL-S5
suitable for F10 adapter adjustable
closing part for glass doors 4-6mm
incl. fixing material
XLOCK Closing part
with ejector
XL-S2
incl. mounting material
4

Adapter
Latch adapter
XL-F6
flexible bolt base made of solid
metal screwed sheet metal part
Adapter for espagnolette lock
XL-F9
8mm roller with recess
Adapter for espagnolette lock
XL-F8
6mm roller with recess
Adapter for glass vitrine doors
XL-F10
Deflection unit 90°
5
Optional ! Please order separately.

TRANSPONDER
Optional ! Please order separately.
ISO ID-Card
XL-AUMIFCL
RFID card transponder ISO14443a
type Mifare Classic reading range
up to 2,5cm
KEY FOB
XL-SAMIFCL
Ultraviolet welded case with stainless
steel ring RFID transponder
ISO14443a type Mifare Classic reading
range up to 2,5cm
KEY FOB
XL-AUMIFCL-2
Encapsulated housing with stainless steel ring
RFID transponder ISO14443a type Mifare
Classic reading range up to 3cm
6

7
Connect the keyboard
and lock cables - see
picture.
Your lock is now ready
for use.
Battery 2CR5, 6V
lithium battery.
For error-free operation,
please always use lithium
batteries!
Open the battery
compartment cover and
insert the batteries with
the correct polarity (+/-).
Close the battery
compartment cover and
fix it with the screw.
PREPARATION FROM THE LOCK

XL Lock Manager App and on the
Install smartphone (IOS + Android).
Simply scan the QR code with your camera:
After installation, create your XLOCK account
and confirm in the e-mail - > done.
INSTALL THE APP AND CREATE AN ACCOUNT
Attention for Android devices:
For Android devices, the following permissions must be granted without restrictions for
the commissioning of Bluetooth devices: Location and Bluetooth
In retrospect, this is no longer possible with some devices. Then you have to uninstall
and reinstall the app and then restart the device.
For the commissioning of an XLOCK lock, the location and Bluetooth must be activated
in the Android system! 8

CREATE ACCOUNT
1. Tap the button above.
9
2. Enter your email address and
choose a password. To confirm,
password again type Tap Register.
3. Verify your account by clicking on the
confirmation link in the XLOCK e-mail in
your e-mail inbox button. It may be that
the confirmation email has landed in your
spam folder.
4. Congratulate! You have
successfully installed the
XL LOCK Manager app.

ADD NEW LOCK IN YOUR ACCOUNT
1. Tap the button at the
bottom right corner. 2. Tap New Lock.
3. Have XLOCK lock
ready? Press and hold
the reset button with a
screwdriver.
5. Give the lock a
name and tap ADD.
6. The XLOCK lock has now
been successfully linked to
the XLOCK APP and is visible
on the start screen.
4. The lock is displayed
with its ID number. Tap
on the green one to
add your XLOCK.
1
0

ADD TRANSPONDERS
1. Tap the lock. The lock
menu opens.
2. Tap the NFC Tags
card icon.
3) Tap that in the
lower right corner
to open the tag
Add.
7) Your transponder
is now stored and
unlocks the lock
when held to the
antenna.
6) The lock signals when it
is ready. Then, as shown
in the photo, hold the
transponder to the
antenna from the
keyboard.
4) Select Bluetooth
and tap Next. 5) Give the
transponder a name.
Tap Next, the lock
starts the learning
process.
1
1

ADD PERMANENT PIN-CODE
1. Tap on the
lock. The lock
menu opens.
2. Tap on the Pin
Code icon. 5) Enter any number
between 4-9 numbers.
Tap via Bluetooth..
3. Tap the icon at the
bottom right corner. 4. Tap on Create
PIN. 7. Your pin code has
now been successfully
created and only needs
to be activated.
8. Enter your pin code on
the XLOCK keyboard
and confirm the code by
pressing the hashtag icon
in the lower right corner.
12
Don't forget. If you try to unlock the lock more than three times with the wrong pin code or more than three times with the wrong NFC, the system will be locked and
will not work. In this case, you need to wait 5 minutes for the system to work again or unlock the lock once with Bluetooth.

13
Hold a programmed transponder against the
lock's antenna. The reading distance depends on
the installation and the medium. The lock
unlocks and the drawer can be opened. After 5
seconds, the lock locks automatically. The
locking time can be adjusted in the app in the
lock settings:
5-900 seconds
Unlocking with the smartphone and the app
is very simple. A swipe to the right unlocks
the lock for 5 seconds. The reading distance
is up to 15 meters. Therefore, the lock can
also be installed hidden, e.g. behind a drawer.
The toggle mode (open-close function) can
also be used with the smartphone. This
function is activated and deactivated in the
app in the lock menu.
With the Lock Manager app, you
can create a permanent PIN code
or a one-time PIN code, as well as
a PIN code with a certain time
period.
UNLOCK and LOCK

XLOCK 186 MOUNTING - LEFT DOOR
14
2) Interior view
1) Exploded view 3) Exterior view
Mounting the lock
Tighten the screws with feeling and do not use drills or cordless
drill or cordless screwdriver.

Hole positions
XLOCK 186 MOUNTING - LEFT DOOR
Relative mounting dimensions
15

16
XLOCK 186 MOUNTING - RIGHT DOOR
2) Interior view
1) Exploded view 3) Exterior view
Mounting the lock
Tighten the screws with feeling and do not use drills or cordless
drill or cordless screwdriver.

Korpus Montage links
17
Hole positionsRelative mounting dimensions
XLOCK 186 MOUNTING - RIGHT DOOR

XLOCK 146 Micro USB
An emergency power supply is
possible with any powerbank.
# Key
RFID
Reading field
LED
Indicator
Emergency power
18

XLOCK GATEWAYS
XLOCK Gateway G2-WIFI incl.
USB C charging cable.
2.4 GHz WIFI compatible USB
power supply required
XLOCK Gateway G3-Ethernet incl.
USB C charging cable.
USB power supply required
XLOCK Gateway G3 POE-Ethernet
incl. USB C charging cable.
POE does not require a separate
power supply
Optional! Please order separately.
19

20
XLOCK BLE
Wireless key
With the wireless key, the lock can be unlocked
over a distance of up to 20 meters - cable-free.
All other functions, such as unlocking and locking
with a transponder; PIN Code or smart phone,
continue to work.
BLUETOOTH ACCESSORIES
Optional ! Please order separately.