XLOCK 220 User manual

XLOCK 220
Installation Guide
MTA_9 344 301 00

4 x screws for lock countersunk
head 3.0 x 45 mm.
2 x screws for closing part
Lens head 4.0 x 12 mm.
Sticker
Lock
XL220
Closing part
XL220
2
4 x AAA
Lithium batteries
PACKAGING CONTENTS
Always use lithium
batteries!
Attention:
Please order batteries
separately.

3
Lock
XL220 Closing part
XL220
DIMENSIONS

TRANSPONDER
Optional ! Please order separately.
ISO ID-Card
XL-AUMIFCL
RFID card transponder ISO14443a
type Mifare Classic reading range
up to 2,5cm
KEY FOB
XL-SAMIFCL
Ultraviolet welded case with stainless
steel ring RFID transponder
ISO14443a type Mifare Classic reading
range up to 2,5cm
KEY FOB
XL-AUMIFCL-2
Encapsulated housing with stainless steel ring
RFID transponder ISO14443a type Mifare
Classic reading range up to 3cm
4

4 pieces AAA lithium
batteries.
For error-free operation,
please always use lithium
batteries!
5
PREPARATION FROM THE LOCK
Open the battery compartment
cover and insert the batteries
with the correct polarity (+/-).
Close the battery
compartment cover and fix it
with the screw.
Your lock is now ready
for use.

XL Lock Manager App and on the
Install smartphone (IOS + Android).
Simply scan the QR code with your camera:
After installation, create your XLOCK account
and confirm in the e-mail - > done.
INSTALL THE APP AND CREATE AN ACCOUNT
Attention for Android devices:
For Android devices, the following permissions must be granted without restrictions for
the commissioning of Bluetooth devices: Location and Bluetooth
In retrospect, this is no longer possible with some devices. Then you have to uninstall
and reinstall the app and then restart the device.
For the commissioning of an XLOCK lock, the location and Bluetooth must be activated
in the Android system! 6

CREATE ACCOUNT
1. Tap the button above.
7
2. Enter your email address and
choose a password. To confirm,
password again
type. Tap Register.
3. Verify your account by clicking on the
confirmation link in the XLOCK e-mail in
your e-mail inbox
button. It may be that the confirmation email
has landed in your spam folder.
4. Congratulate! You
have successfully
installed the XL LOCK
Manager app.

ADD NEW LOCK IN YOUR ACCOUNT
1. Tap the button at the
bottom right corner. 2. Tap New Lock.
3. Have XLOCK lock
ready? Press and hold
the reset button with a
screwdriver.
5. Give the lock a
name and tap ADD.
6. The XLOCK lock has now
been successfully linked to
the XLOCK APP and is visible
on the start screen.
4. The lock is displayed
with its ID number. Tap
on the green one to
add your XLOCK.
8

ADD TRANSPONDERS
1. Tap the lock. The lock
menu opens.
2. Tap the NFC Tags
card icon.
3) Tap that in the
lower right corner
to open the tag
Add.
7) Your transponder
is now stored and
unlocks the lock
when held to the
antenna.
6) The lock signals when it
is ready. Then, as shown
in the photo, hold the
transponder to the
antenna from the lock.
4) Select Bluetooth
and tap Next. 5) Give the
transponder a name.
Tap Next, the lock
starts the learning
process.
9

10
Hold a programmed transponder against the lock's
antenna. The reading distance depends on the installation
and the medium. The lock unlocks and the drawer can be
opened. After 5 seconds, the lock locks automatically. The
locking time can be adjusted in the app in the lock
settings:
5-900 seconds
Unlocking with the smartphone and the app is very
simple. A swipe to the right unlocks the lock for 5
seconds. The reading distance is up to 15 meters.
Therefore, the lock can also be installed hidden, e.g.
behind a drawer. The toggle mode (open-close function)
can also be used with the smartphone. This function is
activated and deactivated in the app in the lock menu.
UNLOCK and LOCK

XLOCK220 MOUNTING OPTIONS
LOCK on the door LOCK on the corpus
Attention:
In the case of corpus mounting, the
RFID antenna signal is on the side of
the corpus.
In the case of corpus mounting,
cabling is easier to implement.
11

DOORS MOUNTING LEFT
The RFID reader direction is at the
door.
The RFID reader direction is
at the door.
39,5
12
52
39,75
10,25
65,5
65,5
Türe



Door

The RFID reader direction is
at the door.
DOORS MOUNTING RIGHT
The RFID reader direction is
at the door.
10,25
39,75
65,5
65,5
52
13
39,5



Door
Door
Door
Door

The RFID reader direction is on
the side of the corpus.
The RFID reader direction is
on the side of the corpus.
24,75
39,75
65,5
14
65,5
22
52
CORPUS MOUNTING LEFT
Door
Door
Door
Door

The RFID reader direction is on the
side of the corpus.
The RFID reader direction is on
the side of the corpus.
CORPUS MOUNTING RIGHT
22
52
39,75
24,75
65,5
15
65,5
Door
Door
Door
Door

XLOCK GATEWAYS
XLOCK Gateway G2-WIFI incl.
USB C charging cable.
2.4 GHz WIFI compatible USB
power supply required
XLOCK Gateway G3-Ethernet incl.
USB C charging cable.
USB power supply required
XLOCK Gateway G3 POE-Ethernet
incl. USB C charging cable.
POE does not require a separate
power supply
Optional! Please order separately.
16

17
XLOCK BLE
Wireless key
XLOCK BLE
Wireless keyboard
With the Wireless Key and the Wireless Keypad, the
lock can be unlocked over a distance of up to 20
meters - cable-free.
The wireless keypad can be used to program all
XLOCK pin code functions such as fixed, time
and one-time code.
BLUETOOTH ACCESSORIES
Optional ! Please order separately.

More information and support at
www.xlockgroup.com
XLOCK by data mobile
Landstrasse 35-39
AUT –6911 Lochau
[email protected]
www.xlockgroup.com