XPOtool 62822 User manual

Operation Manual
Outdoor socket
62822–62829
Illustration similar, may vary depending on model
Read and follow the operating instructions and safety information before using for the first time.
Technical changes reserved!
Due to further developments, illustrations, functioning steps, and technical data can differ insignificantly.
Updating the documentation
If you have suggestions for improvement or have found any irregularities, please contact us.

https://www.XPOtool.com Item 62822–62829 Page 2
The Tool Experts
05 2022-1
The information contained in this document may alter at any time without previous notice. It is prohibited
to copy or spread any parts of this document in any way without prior written allowance. All rights re-
served.
The WilTec Wildanger Technik GmbH cannot be held accountable for any possible mistakes in this
operating manual, nor in the diagrams and figures shown.
Even though, the WilTec Wildanger Technik GmbH has undergone biggest possible efforts to ensure
that the operating manual is complete, faultless, and up to date, mistakes cannot be entirely avoided.
If you should find a mistake or wish to make a suggestion for improvement, we look forward to hearing
from you.
Send an e-mail to:
[email protected]
or use our contact form:
https://www.wiltec.de/contacts/
The most recent version of this manual in various languages can be found in our online shop via:
https://www.wiltec.de/docsearch
Our postal address is:
WilTec Wildanger Technik GmbH
Königsbenden 12
52249 Eschweiler
Germany
To return orders for exchange, repair, or other purposes, please use the following address. Attention!
To allow for a smooth execution of your complaint or return, it is important to contact our customer
service team before returning the goods.
Returns Department
WilTec Wildanger Technik GmbH
Königsbenden 28
52249 Eschweiler
E-mail: [e-mail]
Tel: [phone]
Fax: [phone]

https://www.XPOtool.com Item 62822–62829 Page 3
The Tool Experts
05 2022-1
Introduction
Thank you for purchasing this quality product. To minimise the risk of injury we urge that our clients
take some basic safety precautions when using this device. Please read the operation instruc-
tions carefully and make sure you have understood its content.
Keep these operation instructions safe.
Safety information and instructions
•After receiving the product, make sure that there are no damaged parts and that all parts are
present. Read the instructions carefully, especially the safety instructions, before operating
the appliance.
•This product can only be connected to a grounded socket that is earthed.
•The socket must be placed in a stable location and horizontally or vertically.
•Make sure that the socket is not inserted into a hollow. Rain might cause the socket to be
under water which must be avoided.
•The socket must be installed at least 0.5 m away from any water place.
•This socket has been designed to prevent it from spray water.
•If you want to move the socket, it must be interrupted from the power supply before discon-
necting it.
•If the product's housing is damaged (e.g., by impact) and the product cannot meet the re-
quirements of IP44, it must not be used.
•The socket must only be used in an upright position. If this is not the case, you must check
whether water has already penetrated the product before using it. If water has penetrated the
socket, it must not be used.
Technical data
Energy supply
250 V, 50 Hz (alternating current)
Nominal current (A)
16
Nominal power (W)
3680
Protection type
IP44
General description
This socket outlet is designed for household use. It meets the requirements of splash water protection
(protection class IP44). This product is not suitable for use on construction sites or in other harsh envi-
ronments.
The outdoor socket outlet has 2 switches, each of which can be switched on or off for two sockets via
the corresponding switch (switch position I/O).
1. Insert the plug of your device into one of the sockets of the outdoor socket.
2. If continuous current is required, set the toggle switch to “I.”
3. Set the switch to “O.” The two associated sockets are de-energised.
Operating instructions
1. Connect the cable of the product to the input power.
2. Switch on the corresponding switches for the sockets and select the desired function. If the
switch of a socket is set to “I,” the socket is switched on (kept energised). If the switch of a
socket is set to “O,” the socket is switched off.

https://www.XPOtool.com Item 62822–62829 Page 4
The Tool Experts
05 2022-1
Twilight Sensor
Depending on the model, the outdoor socket is equipped with a twilight sensor that can be switched on
for two sockets at a time via the corresponding switch (switch position “AUTO”). The sensor reacts to
the nearest light conditions and switches the switched sockets on with twilight and off again in bright-
ness. In general, such a sensor should never be placed next to another light source, as this will affect
it and thus may not function properly.
1. Insert the plug of your device into one of the sockets of the outdoor socket.
2. Set the corresponding toggle switch to “AUTO.” The two associated sockets are no longer
supplied with continuous current. They are switched on with corresponding darkness and
switched off again with corresponding brightness.
3. If continuous current is required, the toggle switch must be set to “ON.”

https://www.XPOtool.com Item 62822–62829 Page 5
The Tool Experts
05 2022-1
Disposal regulations
EU guidelines regarding the disposal of scrap electric appliances (WEEE, 2012/19/EU) were imple-
mented in the law related to electrical and electronic equipment and appliances.
All WilTec electric devices that fall under the WEEE regulations are labelled with the crossed-out
wheeled waste bin logo. This logo indicates that this electric equipment must not be disposed with the
domestic waste.
The company WilTec Technik GmbH has been registered in the German registry EAR under the WEEE-
registration number DE45283704.
Disposal of used electrical and electronic appliances
(intended for use in the countries of the European Un-
ion and other European countries with a separate col-
lection system for these appliances).
The logo on the article or on its packaging points out
that this article must not be treated as normal house-
hold waste but must be disposed to a recycling collec-
tion point for electronic and electrical waste equipment.
By contributing to the correct disposal of this article you
protect the environment and the health of your fellow
men. Environment and health are threatened by inap-
propriate disposal.
Material recycling helps reduce the consumption of raw materials.
Additional information on recycling this article can be provided by your local community, municipal waste
disposal facilities, or the store where you purchased the article.
Address:
WilTec Wildanger Technik GmbH
Königsbenden 12 / 28
D-52249 Eschweiler
Important notice:
The reprint or reproduction, even of excerpts, and any commercial use, even in part, of this instruction
manual require the written permission of WilTec Wildanger Technik GmbH.