XROCKER PREMIER 0602001 User manual

User Manual Item no: 0602001
Need Help? Email:
Phone: [phone]
IMPORTANT: You must keep your original retail receipt as proof of purchase.
Premier

2
Thank you for purchasing this X Rocker gaming
chair. You are now close to enhancing your
favourite games with glorious audio!
To get started, please assemble the chair using
the assembly instrucons on the separate leaet
and then follow the instrucons in this manual to
get rocking!
Table of contents
3 Box contents and control panel overview
4 Wireless connecon guide: PS4
5 Wireless connecon guide: Xbox One
6 Wireless connecon guide: TV (All systems)
7 Wired connecon guide: TV (All consoles)
8 Wired connecon guide: PS4 Controller only
9 Bluetooth connecon guide
10 Troubleshoong ps
11 Health and safety informaon
12 Power supply safety informaon
Welcome to X Rocker!

3
+
+
+ +
+
+
Control panel overview
B1 - 3m 3.5mm to 3.5mm Audio cable
B2 - 15cm RCA to female 3.5mm audio cable
B3 - RCA female to female adapters
B4 - Power supply Cable
B7 - Micro USB Cable
0.8m
B
B1
B3
B5 B6
B4
B2
+B7

4
Step 3:
Step 1: Make sure that the PS4™ system is switched OFF. Insert the micro USB cable
into the X Rocker DAC converter and the other end into one of the front USB ports
Step 2: Turn the PS4™ system back on. Select one of the wireless bands
(1,2,3) on the wireless DAC and then switch to the corresponding band on
the chair.
Save, exit and enjoy!

5
Step 1: Make sure that the Xbox One™ system is switched OFF. Insert the
micro USB cable into the X Rocker DAC converter and the other end into
one of the back USB ports on the Xbox One™ system. Remove the clear
Step 2: Turn the Xbox One™ system back on. Select one of the wireless
bands (1,2,3) on the wireless DAC and then switch to the corresponding
band on the chair.
Step 3:
> [Display and Sound] > [Audio Output] > under [Digital Audio], select
I
Save, exit and enjoy!

6
Wireless connecon guide: TV
(All systems)
1. Connect B6 Opcal Cable to the B5 Wirelesss DAC transmier’s SPDIF Port.
2. Connect other end of B6 Opcal Cable to the TV Opcal socket.
3. Connect Micro USB Cable to the transmier and other end to an
available USB socket on the TV.
4. Once connected to your TV, increase volume to 50% of the maxiumum
for the best sound level.**
* N.B: If your TV does not feature an SPDIF or OPTICAL OUT Socket then you can
instead use the 3.5mm audio connecon to connect to a headphone socket.
** Depending on your TV you may need to enable the Opcal output seperately.
B7
B6
Transmier
TV/SPDIF/Opcal Socket
TV USB socket

7
Wired connecon guide: TV
(All consoles)
1. Connect B1 Cable to X Rocker control panel MP3 INPUT sockets.
2. Connect other end of B1 3.5mm end into the headphone socket of
your television.
3. Once connected to your TV, increase volume to 50% of the maximum
for the best sound level. **
** Depending on your TV you may need to increase the headphone
volume separately in the TV sound sengs.
TV/Mobile/Tablet
B1

8
Wired connecon guide: PS4
Controller only
1. Connect the B1 cable to the boom of the PS4 controller via the
headset socket.
2. Connect the other end of the B1 cable to the chair via the green port.
3. With the PS4 turned on, go to the main menu (or locate the main
menu screen). Press and hold the PS buon on the PS4 controller unl
the quick menu appears on screen.
4. In this menu select [Adjust sound and devices]
5. Then select [output to headphones]
6. Change the seng from [Chat Only] to [All audio]
7. Make sure the volume in the previous menu is set to the maximum.
8. Set the control panel Wireless switch to the ‘OFF’ posion.
B1

9
Step 1:
Step 2:
On the Audio output device
turn Bluetooth on if it is not
on already and search for
XROCKER
select the XROCKER
If a passcode is required the four
digit code will be ‘0000’.

10
Troubleshoong ps
• Make sure that the power cable is
connected correctly.
• Make sure that the power supply at the
power source is working correctly.
• With the chair turned to the ON posion,
give the power cable a slight wiggle in the
port. If any lights icker (or not)
then please contact support (details below).
• Review the connecon methods on
the previous page and try alternave
connecon methods if possible.
• Conrm that the device/system is
correctly congured as per previous
connecon guide.
• Make sure that the wireless channel
switcher is in the corresponding posion
that suits your connecon method.
(1,2,3 for wireless and AUX for wired
connecons).
• Please make sure that the volume of
the source device is at a higher level to
strengthen the audio signal.
• Please contact X Rocker support
(service@XRockerNaon.co.uk) regarding
this issue.
• In this case, try another of the three
wireless bands to isolate the signal.
No power going to control panel
Issue Troubleshoong steps
No sound
Wireless transmier cuts out during
gameplay/No vibraon or subwoofer
sound via analogue connecon
The cables connected to my
X Rocker have been broken
accidentally
Interference over wireless connecon

11
Health and safety informaon
• Avoid immersing or allowing the X Rocker to come into contact
with liquids.
• Please consult X Rocker Support before unscrewing any of the electrical
components on the chair.
• Please be mindful of any cabling laid out between the X Rocker and
power source/audio device.
• Please be mindful of cabling aached when moving/swivelling
the X Rocker.
• If the cables or electrical equipment are broken then this may present
a choking risk, please contact Support for replacements and dispose of
these parts safely.
• Do not stand on the X Rocker or exceed the 120kg weight limit via
other means.
• Do not lean back on the chair to the point in which the pedestal would
li o the ground.
• X Rocker armrests are designed for support and comfort during
gameplay, please do not use these as support for geng in/out of
the chair.
• Playing audio for long periods at loud volumes may contribute to
dicules in hearing.
• Please be considerate to others when playing audio through the
X Rocker speakers at higher volumes.

12
Power Supply unit trademark: BI;
Model name: BI36-120250-I;
Input: 100-240V~, 50/60 Hz, 1.2 A;
Output: 12 VDC, 2.5A;
ATTENTION:
A. For Power Adapter, the apparatus shall not be exposed to dripping
or splashing and that no objects filled with liquids, such as vases,
shall be placed on the apparatus;
B. For Power Adapter, the MAINS plug is used as the disconnect device,
the disconnect device shall remain readily operable;
C.Only use the attachments/accessories specified by manufacturer.

Need Help? Email: Service@XRockerNaon.co.uk
Phone: [phone]
www.XRockerNaon.co.uk
IMPORTANT: You must keep your original retail
receipt as proof of purchase.