xsto CT075 User manual
www.xsto.net
OPERATION MANUAL
POWERED STAIR CLIMBER
CT075/CT105
EC DECLARATION OF CONFORMITY FOR
MACHINERY
The company XSTO CO.,LTD. herewith declares that the products of
the powered stair climbers are conform to the current regulations of
the European Union, EC Guidelines 2006/42/EC. This declaration
becomes void if the
climbers have been altered without the consent of XSTO CO.,LTD
Description of the machine: Powered Stair Climber Type:
Signature of the manufacturer: XSTO CO.,LTD.
CATALOG
1 Symbols and safety instructions............................................................... 1
2 Description..........................................................................................................3
2.1 The features..............................................................................................3
2.2 Technical data......................................................................................... 4
2.3 Application fields...................................................................................... 4
2.4 Technical parameters............................................................................4
2.5 Dimensions (mm)...................................................................................6
2.6 Standard Supply Accessories................................................................6
2.7 Optional Accessories............................................................................. 7
3 Initial Operation................................................................................................. 7
3.1 Foldable Loading plate......................................................................... 7
3.2 Adjustable handrail................................................................................8
3.3 Battery Pack.............................................................................................8
3.4 Turning on the stair climber................................................................8
3.5 Climbing status and flat ground status switching.........................9
3.6 Two-speed climbing mode................................................................ 10
3.7 Upstair and downstair switch........................................................... 11
3.8 Check battery capacity........................................................................11
4 Operation...........................................................................................................12
4.1 Loading goods...................................................................................... 12
4.2 Operating on the ground.......................................................................13
4.3 Go up the stairs.................................................................................... 14
4.4 Climbing down Stairs.......................................................................... 16
4.5 Park..........................................................................................................18
4.6 Transport................................................................................................19
5. Maintenance.................................................................................................. 20
5.1 Battery Pack...........................................................................................20
5.2 Exchange the fuse................................................................................22
5.3 Check stair climbing synchronous track........................................ 23
5.4 Recycling.................................................................................................23
6 Malfunction and Troubleshooting....................................................... 24
1
1 Symbols and safety instructions
Before initial operation, read the user manual and take note of the
warning and safety instructions.
Before initial operation, check the electronic functions, the safety
brakes and the position of the climbing wheels
Before initial operation, store the rated load at least one hour in a
nonfreezing environment
Take note of the technical data as the lifting capacity cannot be
exceeded
Stair climber operator should be trained. The person should be
physical and experienced to handle it.
Wear non-slip footwear and always operate with both hands.
Practice operating without a load and at a low speed to start with.
For transportation of cargo, not people. Ensure loads are secured
with attached Safety strap.
Never put your hand under the toe plate or touch rotating or
moving parts.
Do not use it in rain, wet condition, snow or ice.
Do not use it if the wheels broken.
Do not use it on escalators or moving belts.
If the drive elements blocked, turn off the machine immediately.
Turn off machine when transporting to different locations.
Keep the plug-in elements dry. Protect the battery and charging
cable by avoiding car oil, grease, thinners and sharp items
WARNING------Can lead to serious injuries and fatalities
CAUTION------Can lead to light injuries
NOTICE------Can lead to material or premises damage
2
otherwise they will be damaged.
Do not use a high-pressure cleaning. Store it in dry condition.
Repairs can only be done by certified and experienced
engineer.Outter factors like sun light may increase the machine
surface temperature,Keep it away from ignition source.
It may interfere with other electronic devices’ sensitive
electromagnetic fields (e.g. anti-theft systems in department
stores).
Only the accessories provided by XSTO can be used.
3
2Description
2.1 The features
1: switch button 2: up and down switch 3: battery 4: climbing crawler
5: walking wheel6: aluminum alloy handle
7: high and low speed switch 8: aluminum alloy body
9: aluminum alloy loading plate10: aluminum alloy loading plate
4
2.2 Technical data
This user manual is for CT075/CT105 only.
2.3 Application fields
CT075/CT105 is a kind of light Powered stair climber which can use in
the following fields: Logistics, express delivery, office, household and
so on.
2.4 Technical parameters
Type
CT075
CT105
Size(mm)
Height: 1000-1400
Width: 500
Depth: 215
Height: 1000-1400
Width: 500
Depth: 215
Weight
(Kg)
Main unit: 18.5
Charger: 0.3
Battery:3.2
Main unit: 18.5
Charger: 0.3
Battery:3.2
Capacity
(Kg)
Rated: 75
Rated: 105
Climbing speed
(steps/min)
Slow: 35 Fast: 50
Slow: 25 Fast: 35
Step count on
one charge
80-100 floors
(1600-2000 steps)
60-80 floors (1200-1600
steps)
5
Step height
limitation(mm)
<210
<210
Step width
limitation(mm)
>250
>250
Batteries
48V/10Ah (Lithium battery)
48V/10Ah (Lithium
battery)
Direct current
motor
48V300W
48V300W
Noise level
(1 m out from
actuator )
<70dB
<70dB
Storing/operati
ng
temperature of
device
-10℃- +40℃/ 0℃- +40℃
(With no icing)
-10℃- +40℃/ 0℃-
+40℃(With no icing)
Storing/operati
ng
temperature of
battery
-5℃- +35℃/ 0℃- +40℃
-5℃- +35℃/ 0℃- +40℃
Serial number
On body name plate
On body name plate
Protection
Level
IP54
IP54
Note: all the following products are recommended to be used below
1000m altitude, and the environmental humidity is required to be
within the range of 45%-85% (no coagulated snow).
Note: Product processing error leads to different weight of each
product, ±0.5kg of each.
6
2.5 Dimensions (mm)
Units: mm
2.6 Standard Supply Accessories
1
Main unit
2
Safety strap
3
Battery Pack
4
Normal
charger
7
2.7 Optional Accessories
①
Battery Pack
②
Normal charger
3Initial Operation
CAUTION------ Before initial operation, please ensure the
machine is operated in an environment higher than 0 ℃
CAUTION------The machine is light and easy to be push down,
During operation, the machine should be controlled by hand or
simply fixed.
3.1 Foldable Loading plate
The unfold position is the
working position of the
loading plate.
8
3.2 Adjustable handrail
Use the tight handle to adjust
the angle of handrail. After
adjusting the handrail to a
proper angle, tighten the
handle.
For convenient transportation
Handrail can be totally folded
down.
3.3 Battery Pack
NOTE------Keep the plug-in dry and clean!
Install the battery pack
downwards. After inserting
the battery, the machine
have power automatically.
3.4 Turning on the stair climber
Tight Handle
9
Turning on the main button.
The LED lights will light up.
3.5 Climbing status and flat ground status
switching
CAUTION------The machine is light and easy to push. In
operation, control the machine by hand or simply fix the machine
before proceeding!
CAUTION------Improper handling can be pinched by the
machine.
When the climbing machine is
dragging on the ground, kick the
switch to the direction of the
loading board with your foot until
the arc clamp is detached, so that
the walking wheel can turn freely.
10
When the stair climbing machine
is in the stair climbing state, hold
the machine with one hand to
ensure that the stair climbing
machine is in the vertical state,
and kick the switch to the
direction of the track with your
foot to combine the circular
clamping groove with the
supporting bearing of the
walking wheel
3.6 Two-speed climbing mode
12
4 Operation
WARNING------Only trained personnel can operate this
machine!
WARNING------You must practice when empty load during
practice and you must adjust to a low speed!
WARNING------Please use two hands to operate!
WARNING--Note:Motor 65% working time[Continuons
Operating Hours/(Continuons Operating Hours+Continuous rest
hours)≤65%],Rated load of 70% or above,the maximum
continuous running time is less than 25 minutes.Rated load of less
then 70%,the maximum continuous running time is less than 60
minutes.
4.1 Loading goods
1.Adjust the stair climber to
the flat ground state, which is
convenient for dragging, as
shown in the figure.
13
2.Insert the loading board
under the cargo and keep the
cargo on the loading board
smoothly and without shaking.
Use the safety belt Tighten the
goods.
4.2 Operating on the ground
1. Adjust the stair climber to
flat ground status so that the
synchronous track does not
touch the ground when it is
pushed on the ground.
2. Tilt the stair climber and
keep the balance.
14
3. When the stair climber is
transported on the flat, let
the stair climber always be in
the balance.
Note: Be sure to turn off the power switch during ground
operation to avoid malfunction.
4.3 Go up the stairs
WARNING------When the stair climber starts to go upstairs,
the operator will feel a support force. At this time, the operating
angle of the stair climber can be appropriately adjusted to
maintain the balance of the center of gravity of the climber,
thereby offsetting this support force!
WARNING------Always keep the machine balanced!
WARNING------It is forbidden to be under the machine!
15
Adjust the stair climber to
the of climbing state.
Press the battery switch
Set the “Up/down switch” to
up mode.
Adjust the armrests to the
proper condition, Tilt the
machine to Proper angle and
keep balance.
16
Pull the Stair Climber
backwards.The operator hold
the handrail standing 2 or 3
stairs up the machine.
Adjust the operating angle of
the climber, press run button
to start going upstairs.
Pull the stair climber to next
step, then repeat the
climbing action. Operator
should hold the climber
handrails during this
process.
4.4 Climbing down Stairs
WARNING ------ when climbing stairs, the operator will feel
an initial force. Adjust the angle of the stair climber to keep the
balance of gravity to counteract the force.
WARNING ------ Always keep the machine balanced .
WARNING ------ Do not allow people to obstruct the
machine.
This manual suits for next models
3
Table of contents
Other xsto Fitness Equipment manuals
