XtendLan DPM-IP700 User manual

i
7-inch Digital Video Door Phone Quick Start Guide
DPM-IP700

ii
Welcome
Thank you for purchasing our product!
This user’s manual is designed to be a reference tool for your system.

iii
Table of Contents
1Framework...................................................................................................................................1
1.1 Front Panel....................................................................................................................1
1.2 Rear Panel.....................................................................................................................2
2Basic Operations ........................................................................................................................3
2.1 Multiple-media Communication Function .................................................................3
2.1.1 Call...........................................................................................................................3
2.1.2 Monitor....................................................................................................................5
2.1.3 Call History.............................................................................................................5
2.1.4 Contacts..................................................................................................................5
2.2 Information Search Function ......................................................................................6
2.2.1 Information..............................................................................................................6
2.2.2 Alarm Log ...............................................................................................................6
2.3 System Setup................................................................................................................7
2.3.1 Password Setting...................................................................................................7
2.3.2 Background Setting...............................................................................................8
2.3.3 Display Setting.......................................................................................................8
2.3.4 Ring Setting............................................................................................................9
2.3.5 Restore Default Setup..........................................................................................9
2.3.6 Project Setting......................................................................................................10
2.4 Home Security ............................................................................................................10
2.4.1 Security Setting....................................................................................................10
2.4.2 Home Appliances Control..................................................................................12
2.5 Tool...............................................................................................................................12
2.5.1 Clock......................................................................................................................13
2.5.2 Calculator..............................................................................................................13
2.6 Unlock ..........................................................................................................................14
2.6.1 Unlock During the Dial Process........................................................................14
2.6.2 Unlock During the Communication...................................................................14
2.6.3 Unlock During the Monitor Status.....................................................................14
2.7 DND Function..............................................................................................................15
2.8 Turn off LCD................................................................................................................15

iv
2.9 Other functions............................................................................................................15
2.10 Doorbell connection ...................................................................................................16
3Specifications............................................................................................................................17
4FAQ ............................................................................................................................................18

1
1Framework
1.1 Front Panel
Please connect the device to the power socket; you can see the power indication light is on.
After system booted up, you can see the front panel is shown as below. See Figure 2-1.
Figure 1-1
Please refer to the following sheet for detailed information.
SN
Name
Function
1
Clock icon
You can see this icon on the standby interface if you
have set the clock.
2
Network connection icon
It is to display current network connection status.
3
Time
It is to display current time.
4
Menu button
The main menu button.
5
Microphone
Audio input.
6
Unlock button
Click it to open the door when you are monitoring,
calling or in the communication process.
7
Pick up button
When there is an incoming call, click it to pick up the
phone.
8
Monitor button
Monitor the connected door station.
9
Lock LCD
Lock the LCD, turn off or boot up the LCD.
10
Emergency call button
Click it to generate an emergency call to the
management centre.
11
DND status indication
light
The indication light is on (green) if the do-no-disturb
status is enabled.
12
Information indication
light
The indication light is on (green) if there is any
unread message.
4
5
6
12
1
1
10
9
8
7
13
14
15
1 2 3

2
13
Network indication light
The indication light is on (green) if the network
connection is OK.
14
Power status indication
light
The indication light is on (green) when the power
connection is OK.
15
Shortcut menu
Main menu button
1.2 Rear Panel
The rear panel is shown as in Figure 1-2.
Figure 1-2
Please refer to the following sheet for detailed information.
SN
Name
Function
1
RJ-45 network port
Connect to the Ethernet.
2
Power port
Supply 12V DC power
3
RJ11 extension
RJ11 extension
4
Alarm extension
There are 10 pins (from left to the right).
GND alarm 8 alarm 7 alarm 6 alarm 5
GND alarm 4 alarm 3 alarm 2 alarm 1

3
2Basic Operations
2.1 Multiple-media Communication Function
In the standby mode, click the button; you can go to the main interface. Click the “Call”
button; you can see there are five function buttons: call, monitor, leave messages, contacts. See
Figure 2-1.
Figure 2-1
2.1.1 Call
2.1.1.1 Call Household
Click the Call button; you can go to the call interface. See Figure 2-2. Please input the household
number and then click the call button, you can call a resident. For those residents saved in the
contacts, you can directly select the resident and then click the call button.
Please note, you need to contact your local management centre for 8-digit room number.
Figure 2-2

4
2.1.1.2 Call Extension Number
Click the “Call extension”button; you can talk to the extension number. The interface is similar to
the Figure 2-2.
2.1.1.3 Call Management Centre
Click the “Management centre”button; you can talk to the management centre. The interface is
similar to the Figure 2-2.
2.1.1.4 Contacts
Click the “Contacts “button; you can go to the following interface. See Figure 2-3. Please select
the household you want to call and then click the call button.
The contacts operation includes add, modify, delete, delete all and etc.
Figure 2-3
2.1.1.5 Call History
The call history includes the missed call, received call, dialed phone and etc. Select one item in
the list and then click the “Call”button, you can call the specified number. Click the Save button,
you can save current phone to the contacts. The contacts also supports delete and delete all
function. See Figure 2-4.
Figure 2-4

5
2.1.2 Monitor
In the main interface, select the multiple-media communication button and then select the
“Monitor”button; you can view the video from the door station. See Figure 2-5. You can
implement the following operations.
Click the “Record”button; you can record the video from the monitor door station. The
recorded files are saved in the monitor record. Please go to the Monitor record to view the
detailed information.
Click the “Snap”button; you can snap the picture from the monitor door station.
Click the “Unlock”button; you can unlock the monitor door station.
If there are several door stations, you can click the “Next channel”to view the video from the
next door station.
Figure 2-5
2.1.3 Call History
In the main interface, click the “Multiple-media communication”button and the select the “Call
history” button; you can see an interface is similar to Figure 2-4.
2.1.4 Contacts
In the main interface, click the “Multiple-media communication”button and the select the
“Contacts”button; you can see the following interface. Click “Add”button to add the resident
information and then click the “Save”button, you can edit the address list. See Figure 2-6.

6
Figure 2-6
2.2 Information Search Function
On the standby interface, click the button; you can go to the main interface. Click
the”Information search”button; you can go to the information search interface. There are five
buttons: information, video/audio record, monitor record, alarm log and visitors. All the
information is listed by the time. The information indication light is on when there is unread
message. The information indication light is off when the entire messages are read.
Figure 2-7
2.2.1 Information
Click “Info”button, you can view all information. It includes property advertisement, water and
electricity bill, power off notice and etc. All the information issued is from the management centre.
See Figure 2-8.
Figure 2-8
2.2.2 Alarm Log
Click the “Alarm log”button; you can view the alarm record of this station. See Figure 2-9.

7
Figure 2-9
2.3 System Setup
On the standby interface, click the button; you can go to the main interface. Click the
“Config”button. You can set the password, background, display, and ring, touch panel calibration,
restore factory default setup, project installation and etc. You can set the corresponding
parameters if necessary. See Figure 2-10.
Figure 2-10
2.3.1 Password Setting
The password setup interface is shown as in Figure 2-11.
Here you can set general user password, door station unlock password, door station anti-hijack
password. Please input the old password, and then input new password and confirm. Click the
modify button, the password is successfully modified. Default password is “888888”.
Please note the door station unlock password and door station anti-hijack password shall
be verified by the management centre before they become valid.

8
Figure 2-11
2.3.2 Background Setting
In this interface, you can set the favorite background image. Click the Modify button, the
modification is successfully saved. See Figure 2-12.
Figure 2-12
2.3.3 Display Setting
In the display interface, you can set brightness, contrast, hue, screen saver waiting time, screen
saver last time. Click the modify button to save current setup. See Figure 2-13.

9
Figure 2-13
2.3.4 Ring Setting
In the ring setup interface, you can set the incoming call ring, alarm ring , clock ring and set the
ring volume. See Figure 2-14.
Figure 2-14
2.3.5 Restore Default Setup
The system supports restore default setup function. Go to the Restore default setup interface and
then click the OK button. Some items such as user password, anti-hijack password, door station
password, alarm ring, incoming call ring, LCD parameter, and screen lock time, screen turn off
time, and clock information will restore the factory default setup. See Figure 2-15.

10
Figure 2-15
2.3.6 Project Setting
Please note this function is for system debug only. You need to contact our local project engineer
for help.
2.4 Home Security
On the standby interface, click button to go to the main interface. Click the “Home security”
button, you can go to the home security interface. The system provides many home security
modes such as home, outgoing, sleep mode. It also provides system setting and home
appliances control function and etc. See Figure 2-16.
You can set the home security mode according to your actual requirements. You need to select
the area you want to set and then enable. Then you need to go to the Scene mode interface to
select the mode and implement the corresponding setup to enable. You can see the mode icon
at the right top corner.
Figure 2-16
2.4.1 Security Setting

11
In the Indoor mode, select the area you want to set and then check the button to enable. See
Figure 2-17.
Please note you need to go to the following interface to set the area.
Figure 2-17
Go to the system setting interface and then select the “Indoor mode”. Click the “Modify”button.
See Figure 2-18.
Figure 2-18
Click the “Scene mode”and then select the “Home mode”. Now you need to set to enable the
arm function. You can see the corresponding mode icon at the top right corner. See Figure 2-19.

12
Figure 2-19
2.4.2 Home Appliances Control
Click the “Home appliances control”button; you can see the following interface. Here you can
control the lights. See Figure 2-20.
Figure 2-20
2.5 Tool
On the standby interface, click button to go to the main interface. Click the “Tools”button;
you can go to the tool interface. Here you can see the aux function such as calculator, clock,
calendar, user’s manual and etc.

13
Figure 2-21
2.5.1 Clock
Time is synchronized from door station. Firstly pls set a proper time on your door station.
Figure 2-22
2.5.2 Calculator
In the “Tools”interface, click the “Calculator”button; you can go to the following interface. See
Figure 2-23. You can implement the calculation here.
Figure 2-23

14
2.6 Unlock
2.6.1 Unlock During the Dial Process
During the dial process, you can open the e-lock of the door station remotely. There is a 15-
second for you to confirm the unlock operation. During these 15 seconds, the video is properly
displayed. After the 15 seconds countdown, system returns to the standby interface.
Figure 2-24
2.6.2 Unlock During the Communication
During the communication process, you can open the e-lock of the door station remotely. There
is a 15-second for you to confirm the unlock operation. During these 15 seconds, the
communication is OK and the video is properly displayed. After the 15 seconds countdown, the
phone automatically hangs up.
Figure 2-25
2.6.3 Unlock During the Monitor Status
During the monitor status, you can open the e-lock of the door station remotely. There is a 15-
second for you to confirm the unlock operation. During these 15 seconds, the video is properly
displayed. After the 15 seconds, the video automatically disappears.

15
2.7 DND Function
This series product supports the do-not-disturb (DND) function. You can enable this function to
shield the incoming ring. On the standby interface click the button, you can go to the DND
setup interface. There are total six options: 0-hour/1-hour/2-hour/4-hour/8-hour/24-hour. You
can enable or disable this function. You can set the corresponding valid time after you enabled
this function.
2.8 Turn off LCD
The system supports LCD off function. On the standby interface, click the Lock LCD button
(Button 9 in Figure 1-1) the LCD turns off. On the non-standby interface, click the Lock LCD
button twice, the LCD turns off. You can click the Lock LCD button to boot up the LCD if current
screen is off.
2.9 Other functions
On the standby interface, click the , you can see there are some aux functions such as
information search, call, monitor and etc Here you can also quickly use the information search,
call, monitor function and etc. See Figure 2-26.
Figure 2-26

16
2.10 Doorbell connection
Pls connect a door bell to the first alarm port. After that set “Doorbell Ring” type according figure
2-27.
Figure 2-277