Xtreme Power Conversion XVT 600VA Guide

XSTi Standby UPS
400VA, 600VA, 800VA Models
User & Installaon Manual
www.xpcc.com | © 2015 Xtreme Power Conversion Corporaon. All rights reserved. (Rev 12/14/15)

Xtreme Power Conversion Corporaon
XSTi User’s Manual
Page 2
Uninterrupble Power Supply
Table of Contents
Package Contents........................................................................................ 3
Product Introducon................................................................................... 3
Product Overview........................................................................................ 3
Installaon & Inial Startup.........................................................................4
Indicators & Alarm Condions......................................................................5
Troubleshoong...........................................................................................6
Specicaons...............................................................................................7
Obtaining Service.........................................................................................8

Xtreme Power Conversion Corporaon
XSTi User’s Manual
Page 3
Uninterrupble Power Supply
Package Contents
You should be receiving the following items inside the package:
• UPS Unit
• User Manual
• Local Monitoring Soware CD - XSTi-600/800 models
• USB cable - XSTi-600/800 models
Product Introducon
Thank you for selecng this uninterrupble power supply (UPS). It provides you with protecon for connected
equipment. Please read this manual before installing the XSTi Series UPS models XSTi-400, XSTi-600, and XSTi-800
as it provides important informaon that should be followed during installaon and maintenance of the UPS and
baeries, allowing you to correctly set up your system for the maximum safety and performance. Included is infor-
maon on customer support and service, if it is required. If you experience a problem with the UPS, please refer to
the Troubleshoong secon in this manual to correct the problem. If the problem is not corrected, please collect
informaon so that the Technical Support personnel can more eecvely assist you.
Product Overview
The XSTi Series UPS provides comprehensive protecon in a small and economical package. This UPS is compact,
oering greater power. The XSTi has been designed with a microprocessor to guarantee high reliability, and pro-
vides stable power to connected equipment, enabling shutdown of your PC or other equipment safely during a
power failure. It’s a perfect soluon for any home or small oce environment.
Front view

Xtreme Power Conversion Corporaon
XSTi User’s Manual
Page 4
Uninterrupble Power Supply
Rear view
Installaon & Inial Startup
Note: Before installaon, inspect the unit and packaging to make sure that nothing inside has been damaged.
Placement & Storage
Install the UPS in a protected area that is free of excessive dust and has adequate air ow. Place the UPS away
from other units at least 7.8 in (20 cm) to avoid interference. DO NOT operate the UPS where the temperature and
humidity is outside the specied limits. (See Specicaons for details).
7.8 in
7.8 in
Connect UPS to Ulity and Charging
Before the inial use of the UPS, plug the UPS input cord into a wall outlet and turn the UPS on by depressing the
Power switch on the front of the UPS. For best results, the baeries in the UPS should be charged for at least 8
hours before use. The UPS charges its baery while it is connected to AC ulity power and powered on.
CAUTION: NEVER connect a laser printer or scanner to the UPS. This may cause damage to the unit.
Connecng the Loads
Plug the loads to be supported by the UPS into the output receptacles on the rear of the UPS. Simply turn the
power switch on the UPS on and the devices connected to the UPS will be protected by the UPS unit.
Turn UPS ON / OFF
To turn the UPS unit on, press the Power switch on the front of the UPS. To turn the UPS unit o, press the Power
switch on the front of the unit again.

Xtreme Power Conversion Corporaon
XSTi User’s Manual
Page 5
Uninterrupble Power Supply
Connecng Local Monitoring Soware (oponal)
If it is desired to use the Local Monitoring Soware, and if your UPS is equipped with USB communicaons, con-
nect a USB cable from your computer to the UPS, and install the soware from the CD.
Indicators & Alarm Condions
Condion Visual Indicator Alarm
AC mode Blue LED illuminated No Audible Alarm
Baery mode Blue LED ashes every 10 seconds Audible Alarm sounds every 10
seconds
Low baery mode Blue LED ashes every 1 second
and Red LED is illuminated
Audible Alarm sounds every 1
second
Fault Red LED is illuminated Audible Alarm is connuous
Alarm for over temperature protec-
on Red LED ashes every 0.5 seconds No Audible Alarm
IMPORTANT SAFETY INSTRUCTIONS: (SAVE THESE INSTRUCTIONS)
CAUTION! (UPS having Internal Baeries): Risk of electrical shock – Hazardous live parts inside this unit are ener-
gized from the baery supply even when the input AC power is disconnected.
CAUTION! (No User serviceable Parts): Risk of electrical shock, do not remove cover. No user serviceable parts
inside. Refer servicing to qualied service personnel.
CAUTION! (Non-isolated Baery supply): Risk of electric shock, baery circuit is not isolated from AC input, haz-
ardous voltage may exist between baery terminals and ground. Test before touching.
WARNING! Unit intended for installaon in a controlled environment.
CAUTION! Do not dispose of baeries in a re, the baery may explode.
CAUTION! Do not open or mulate the baery, released electrolyte is harmful to the skin and eyes.
CAUTION! A baery can present a risk of electric shock and high short circuit current. The following precauon
should be observed when working on baeries:
• Remove watches, rings or other metal objects.
• Use tools with insulated handles.
To reduce the risk of electric shock, disconnect the UPS from the main supply before installing a computer inter-
face signal cable. Reconnect the power cord only aer signaling interconnecons have been made.
Servicing of baeries should be performed or supervised by personnel with knowledge of baeries and the re-
quired precauons. Keep unauthorized personnel away from baeries.
The instrucons contained within this safety manual are deemed important and should be closely followed at all
mes during installaon and follow-up maintenance of the UPS and baeries.

Xtreme Power Conversion Corporaon
XSTi User’s Manual
Page 6
Uninterrupble Power Supply
CAUTION: The unit has a dangerous amount of voltage. If the UPS indicator is on, the unit’s outlets may
have a dangerous amount of voltage even when not plugged into the wall outlet because the baery may
connue to supply power. Care should be taken to undertake installaon indoors, free from electrically-
conducve parcles which are under temperature and humidity control, in order to reduce the risk of
electric shock. It is best to disconnect the device using the power supply cord. Ensure that the equipment
is placed in a posion near the outlet where easily accessible. All servicing on this equipment must be
carried out by qualied service personnel. Before conducng any maintenance, repair, or shipment, rst
ensure that everything is turned o completely and disconnected.
Troubleshoong
Condion Visual Indicator Alarm
No LED display on the front UPS
panel
Low baery Charge the UPS at least 8 hours
Baery fault Replace the baery with the same
type of baery
The UPS is not turned on Press the Power Switch on the front
of the UPS
Alarm connuously sounds when
the AC input is normal
The UPS is overloaded Remove some of the load from the
output of the UPS
UPS fault Return the unit for service
Alarm sounds every 2 seconds
when the AC input is normal
Baery defect Replace the baery with the same
type of baery
Charging circuit is damaged Return the unit for service
When power fails, backup me is
shorter than expected
The UPS is overloaded Remove some of the load from the
output of the UPS
Baery voltage is too low Charge the UPS at least 8 hours
Baery defect Replace the baery with the same
type of baery
The AC input is normal but the blue
LED is ashing Power cord is loose Reconnect the input power cord properly

Xtreme Power Conversion Corporaon
XSTi User’s Manual
Page 7
Uninterrupble Power Supply
Specicaons
Model XSTi-400 XSTi-600 XSTi-800
Capacity 400VA/240W 600VA/360W 800VA/480W
Input
Voltage 230 VAC
Range 180 - 270 VAC
Frequency 50 Hz
Output
Voltage (AC mode) 230 VAC
Voltage (bat mode) 230 VAC ± 10%
Transfer Time 2 - 6 ms (typical)
Waveform Simulated Sine Wave
Baery
Type & Qty (1) 12V/4.5AH (1) 12V/7AH (1) 12V/9AH
Runme Up to 38 min Up to 68 min Up to 87 min
Charging Time 8 hours to 90% capacity
Protecon Overcharge, discharge, short circuit, and thermal
Physical
Dimensions (W x D x H) 82.5 x 228 x 207 mm (3.2 x 8.9 x 8.1 in) in vercal stand posion
Weight 2.2 kg (4.8 lbs) 2.7 kg (5.9 lbs) 3.1 kg (6.8 lbs)
Input Cord IEC 1.5m with Schuko Plug
Environmental
Humidity 0 - 90%
Temperature 0 - 40°C (32 - 104°F)
Altude 3500m (11,500 ) above sea level

Xtreme Power Conversion Corporaon
XSTi User’s Manual
Page 8
Uninterrupble Power Supply
Obtaining Service
If the UPS requires Service:
1. Use the TROUBLESHOOTING secon in this manual to eliminate obvious causes.
2. Verify there are no circuit breakers tripped.
3. Call your dealer for assistance. If you cannot reach your dealer, or if they cannot resolve the problem, call Xtreme
Power Conversion Corp Technical Support at 800.582.4524. Technical support inquiries can also be made at
[email protected]. Please have the following informaon available BEFORE calling the Technical Support
Department:
• Your name and address.
• The serial number of the unit.
• Where and when the unit was purchased.
• All of the model informaon about your UPS.
• Any informaon on the failure, including LED’s that may or may not be illuminated.
• A descripon of the protected equipment, including model numbers if possible.
• A technician will ask you for the above informaon and, if possible, help solve your problem over the
phone. In the event that the unit requires factory service, the technician will issue you a Return Mate-
rial Authorizaon number (RMA).
If you are returning the UPS to Xtreme Power for service, please follow these procedures:
1. Pack the UPS in its original packaging. If the original packaging is no longer available, ask the Technical Sup-
port Technician about obtaining a replacement set of packaging material. It is important to pack the UPS
properly in order to avoid damage in transit. Never use Styrofoam beads for a packing material.
2. Include a leer with your name, address, dayme phone number, RMA number, a copy of your original
sales receipt, and a brief descripon of the problem.
3. Mark the RMA number on the outside of all packages. Xtreme Power cannot accept any package without
the RMA number marked on the outside of the boxes.
4. Return the UPS by insured, prepaid carrier to the address provided by the Technician.
5. Refer to the Warranty statements in this manual for addional details on what is covered.