Yamaha FX HO 2016 User manual

Yamaha FX HO 2012-2018 Instructions
!
For the best support, please watch our installation video on our website here:
https://highsurfrescue.com/portfolio/strap-kit/
Download color copy at https://highsurfrescue.com/resources/
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
Provided:!Straps!&!Hardware!
Needed:!Drill,!3/16!Drill!Bit!&!Rivet!Gun!
!
#1!–!#4!Straps!denoted!in!the!order!that!
they!are!attached!to!the!ski!from!bow!
(front)!to!stern!(back)!
***Note:!keep!all!buckles!on!port!(left)!side!of!ski.!!
!
Extra!washers!should!be!used!as!backing!washers!
inside!hull!for!all!rivets.!!

!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
STEP!#1!
!
Hole!in!#1!strap!sandwiches!in!hatch.!
Loosen!bolt!in!photo,!slide!strap!in!between!
plastic!and!align!hole!with!bolt.!Re-fasten!
bolt.!Close!hatch,!with!strap!dangling,!place!
bracket!parallel!with!the!hatch.!Using!the!
brackets,!mark!holes!where!drilling!is!
needed.!Drill!holes,!attach!rivets!and!repeat!
for!opposite!side.!!
STEP!#2!
!
Align!the!#2!strap!by!placing!the!strap!
over!the!glove!box.!Align!ends!that!will!be!
riveted!with!trim!on!each!side.!Using!strap!
mark!holes!where!drilling!is!needed.!Drill!
holes,!attach!rivets!and!repeat!for!opposite!
side.!!!!
STEP!#3!
!
Align!the!#!strap!(with!handle)!on!the!rear!
of!the!front!seat.!Level!bracket,!using!
bracket!mark!holes!where!drilling!is!
needed.!Drill!holes,!attach!rivets!and!
repeat!for!opposite!side.!!!
STEP!#4!
!
Align!the!#4!strap!on!the!rear!of!the!rear!
seat.!Using!strap,!mark!holes!where!
drilling!is!needed.!Drill!holes,!attach!rivets!
and!repeat!for!opposite!side.!!