Yard Works 060-4543 User manual

model number 060-4543 | contact us: 1-866-523-5218
IMPORTANT:
Read and follow all safety rules and operating
instructions before using this product.
Instruction
Manual
2-Wheel Wheelbarrow

model no. 060-4543 | contact us: 1-866-523-5218
2
1
2
3
4
5
6
7
8
10
9
Exploded View
11

model no. 060-4543 | contact us: 1-866-523-5218 model no. 060-4543 | contact us: 1-866-523-5218
3
Parts List
Hardware
Item Description QTY
1Tray 1
2 Tray brace 2
3 Riser 2
4 Handle 2
5 Wheel guard 1
6 Axle 1
7 Wheel 2
8 Leg brace 1
9 Axle bracket 2
10 Leg 2
11 Grip 2
(12) 4 1/4” (11 cm) Bolt
2 pieces
(13) 2 3/4” (7 cm) Bolt
2 pieces
(14) 2” (5.5 cm) Bolt
6 pieces
(15) 3/4” (2 cm) Bolt
6 pieces
(16) Nut
16 pieces
(17) Spacer
2 pieces
(18) Flat washer
2 pieces
(19) Cotter pin
2 pieces

model no. 060-4543 | contact us: 1-866-523-5218
4
Assembly
STEP 1:
Push bolts (2) through bottom of tray (1)
and through riser (3).
Repeat for second riser.
STEP 3:
Make sure the holes in leg (10) are facing
the back of the tray and then place leg over
bolts and loosely attach to handle with nuts
(16). Repeat for other leg.
STEP 2:
Turn tray over, place handles (4) over bolts
and lower onto risers.
!TIP: The riser will grab the bolts and hold them in place.
1
2
3
10
4
16

model no. 060-4543 | contact us: 1-866-523-5218
5
Assembly
STEP 4:
Place leg brace (8) across back
of leg and loosely attach using
two bolts (15) and two nuts (16).
Repeat to attach the other end
of the leg brace to the other leg.
Push grips (11) onto ends of
each handle.
!TIP: Don’t tighten the nuts at this time.
model no. 060-4543 | contact us: 1-866-523-5218
15
16
8
STEP 5:
Use two bolts (13) and two nuts (16) to
attach wheel guard (5) to front of handles.
16
13
5
!TIP: Bolts should point to the inside of the handles. Use a ½"wrench or
socket to fully tighten wheel guard. Leave the rest of the nuts and bolts
loosely fastened.
11

Assembly
model no. 060-4543 | contact us: 1-866-523-5218
6
STEP 6:
Attach axle bracket (9) to bottom of
handle using a bolt (14) pushed through
the hole closest to tray. Push second
bolt (14) through hole in bottom of tray
brace (2) then through handle (using hole
closest to wheelguard) and finally through
axle bracket. Attach loosely with nuts (16).
Repeat to attach second axle bracket to
other handle.
14
16
9
2
!TIP: Be sure long end of axle bracket points outward. Don’t tighten
the nuts at this time.

Assembly
model no. 060-4543 | contact us: 1-866-523-5218
7
model no. 060-4543 | contact us: 1-866-523-5218
STEP 7:
Slide axle (6) through both axle brackets.
Slide spacer (17), wheel assembly (7) and
then washer (18) onto end of axle. Secure
by attaching cotter pin (19) through hole
in end of axle. Repeat to attach second
wheel. Use bolts (15) and nuts (16) to
attach tops of tray braces to tray. Use a ½"
wrench or socket to fully tighten all nuts.
!TIP: Be sure to mount each wheel so that the valve stem is on the
outside.
!For replacement parts and warranty information, call 1-866-523-5218.
Made in U.S.A.
YardWorks Canada Toronto, Canada M4S 2B8
7
17
6
16
15
18
19
18
19
Limited 4-year Warranty
This product carries a four (4) year warranty against defects in workmanship
and materials. Trileaf Distribution agrees to replace a defective product, within
the stated warranty period, when returned to the place of purchase with proof of
purchase. This product is not guaranteed against wear or breakage due to misuse
and/or abuse.
504395