Yealink EXP39 User manual

Yealink EXP39 Expansion Module
!
!
Expansion Module EXP39 is designed for connection to the Yealink T26P/T28P
and T38G VoIP phones.
!
Note: Before installation, be sure to unplug the remote Internet connection and/or
power supply as well as the phone stand from the Yealink IP phone. Place the telephone
and the expansion module upside down on a soft surface so that you can read
nameplates from the front. The expansion module must be placed to the left of the
telephone.
a). Connect to the phone
!
Use the connecting sheet and screw to connect the EXP39 to the IP phone.
!
!

!!! !
!
!
b). Connect to the next module
!
Follow the same step to connect the next expansion module
!
!
!!!!!!! !
!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !
!
Note:!The phone can support up to six expansion modules. If you use more than three
expansion modules, you will need to connect an additional power adapter to any one of
the expansion modules.

c). Connect cords
!
Plug the connecting cord into the Ext jack of the IP phone (the next port to the Ext in
jack of the first module). To connect more than one module, plug another cord into the
Ext out jack and the other port to the Ext in jack of the second module.
Note: Users can connect up to six modules. Connect the Ext in port of the previous
module and the Ext out port of the next module with a connecting cord.
Attach the stand and power adapter. Connect handset and headset to use.
d). Configuration
!
The expansion module EXP39 has 38 programmable keys that can be configured via the
Star2Star web portal. 19 keys appear on the first screen with a “Page Switch” key
at the top of the screen that switches the display to a second display of 19 keys. Press
the “Page Switch” to return to the original screen.
You may use the Star2Star web portal to configure key functions, i.e. monitor the
presence of local extensions, speed dials, numbers you call on a regular basis.
1. Log in to the Star2Star web portal. Click the Configuration tab at the top of the
screen.

2. Click Extensions.
3. Edit the extension and set the number of expansion modules. Click Save Changes to PBX.

4. Click Individual Phone Settings.
5. Click the Speed Dials option.
6. Use the drop-down lists to point the speed dials to the desired extensions, destinations or
custom dial patterns.