Yealink CP700 User manual

USB Speakerphone USB
扬声器
CP700
Quick Start Guide(V1.0)
English | 简体中文
快速入门指南

Package Contents
Charging Your CP700
Plug the CP700 into a USB power source. The CP700 battery lasts for up to 12 hours
of talk time and takes approximately 3 hours (5V/500mA) to fully charge.
Viewing the Battery Status
CP700 BT50(optional) Quick Start Guide Zipper Bag
Tap to view the battery status.
Full battery Medium battery
green
PC

Low battery
Extremely low on power, flashing red
Connecting Your CP700
Connect to PC via Bluetooth
PC
Connect the BT50 into a USB port on your PC. The CP700 and the BT50
are pre-paired and ready to use out of the box. The Bluetooth range is
30m/100ft.
Connect to PC via USB Cable
Connect to smartphone via Bluetooth
Hold for 3 seconds to enter the pairing mode, and pair to your
smartphone when you will hear the Bluetooth pairing instructions. Then
select the CP700 from the Bluetooth device list on smartphone to connect
it.
Note: If there is no sound coming from your CP700, you may need to set the CP700 as
the playback device in your operating system’s audio settings.
PC

Using Your CP700
Power On/Off
Mute Button
Volume Up
Volume Down
Answer Call End Call
Bluetooth Button
Microphone
The CP700 is compatible with Microsoft Teams/Skype for Business client
and Yealink VCD client. The CP700 can connect to PC via USB cable or
Bluetooth, and to smartphone via Bluetooth. After connected, you can
control the calls on the CP700.
The Bluetooth range is 10m/30ft.
To disconnect, double-tap .
To reconnect, tap again.
Teams Button/
Voice Assistant

Hold for 3 seconds.
Power on or off
End or reject a call
Mute/unmute microphone
Volume up/down
Answer a call
Task Do
Tap .
Tap .
Tap / .
During a call, tap . The mute LED
Indicator and LED light-ring glow red.
Reset to the factory Hold and for 6 seconds.
Hold a call During a call, tap . The LED light-ring
flashes green.
Teams Button functions
Activate your smartphone’s voice
assistant
Task
Tap .
Invoke the Teams client Tap .
Do
Activate Cortana Hold for 2 seconds.
Note: If you do not use the CP700 within 60 seconds, the CP700 will go to the power
safe mode, under this mode, you can tap any key to awake the CP700.
The Bluetooth pairing information will be cleared if you reset the CP700 to the
factory.
Note: Before using the Teams button functions, you should install the Microsoft Teams
client on your PC or smartphone.

Teams Button LED Indicator
Slow-flashing white
LED Indicator Description
Receive incoming calls/voice mails/
Teams Notification Indicators
Solid green
Off
Connected
BT50 LED Indicator
Slow-flashing blue
LED Indicator Description
Pairing
Solid blue
Off Disconnected
Connected
Disconnected

包装清单
充电
使用CP700自带的USB线缆接入USB电源。CP700电池可支持10小时通话时
长，充满电大约需要3小时(5V/500mA) 。
检查电量
CP700 BT50(可选) 快速入门指南拉链包
在开机状态下，按 查看电池电量状态。
满格 中等电量
绿色
PC

连接CP700
通过蓝牙连接至PC
将BT50插入电脑的USB接口。BT50与CP700已预先配对，开箱即可使用。蓝牙
距离为 30米。
PC
通过USB线连接至PC
低电量
超低电量时，红灯闪烁
连接至移动电话
长按蓝牙键 3S，蓝牙进入配对模式，然后与智能电话进行配对。并在智能电
话上蓝牙设备列表中选择并连接CP700。
蓝牙距离为10米。
说明：如果使用过程无声，尝试手动将CP700设为系统音频设备。
PC

使用CP700
电源开启/关闭
静音键
音量调高
音量调低
接听电话 挂断电话
Teams键/语音助手
蓝牙键
麦克风
CP700可以兼容Microsoft Teams/Skype for Business客户端、Yealink UME/
VCD客户端。 CP700可以通过蓝牙连接至智能手机，或通过USB线/蓝牙连
接至PC，连接后，你可以在CP700上控制通话。
如果要断开蓝牙连接，双击蓝牙键 断开连接。
再次按蓝牙键 可重新连接。

长按电源键 3秒。
开机/关机
挂断电话/拒接来电
麦克风静音/取消静音
音量调高/调低
接听来电
任务 操作
按接听键 。
按挂断键 。
按音量调高键 / 调低键 。
环形灯带的蓝色LED数增多/减少。
通话中，按静音键 。
静音键红灯常亮，环形灯带呈红色。
恢复出厂 按住接听键 和挂断键 6秒钟。
通话保持 通话中，按接听键 。 环形灯带绿色闪烁。
Teams键功能
唤醒智能手机的语音助手
任务 操作
按Teams键 。
调出Teams客户端 Teams客户端连接成功后， 按Teams键 。
激活Cortana 长按Teams键 2秒。
说明：在使用Teams按键功能之前，需要先在PC或智能手机上安装Microsoft Teams客户端。
说明：CP700在60秒无操作后进入低功耗模式，在该模式下，你可以按任意键激活。
恢复出厂后，蓝牙配对信息会被清空。