YitaHome LHHY-V 4 User manual

ASSEMBLY INSTRUCTIONS
10X12 FT HARDTOP GAZEBO
FTPLCG-0190
FTPLCG-0191
FTPLCG-0192
FTPLCG-0219
FTPLCG-0220
FTPLCG-0221
FTPLCG-0305
FTPLCG-0306
FTPLCG-0307
LHHY-V 4

WARNING
1. Must use ground nails, ropes, and expansions screws for
whichever ground you install on for stability to avoid devastat-
ing injuries for people inside or nearby and property damage
caused by a collapsing gazebo.
2. Do not use this gazebo in high winds, heavy snow, or inclem-
ent weather. It is not designed to withstand strong gusts of wind,
heavy snow accumulation, or other inclement weather. Must
take precautions when the wind speed exceeds 25Mph, and
clear snow when it accumulates more than 2 inches.
3. Before use, thoroughly inspect the gazebo to make sure all
bolts, nuts, and buckles have been completely tightened and
securely fastened.
4. Warranty does not cover damages, losses, or injuries resulting
from improper installation, misuse, not using stability accesso-
ries mentioned above, non snow cleaning, failure to take pre-
cautionary measures, etc.

ASSEMBLY INSTRUCTIONS
1
A
B
B1
X4
X2
X2
B2 X2
B3 X2
EX4
E1 X4
F1 X4
F2 X4
Item no. Reference Image Qty.
1. Two or more people are required for assembly.
2. A ladder and electric drill may be necessary.
3. Do not erect the structure in heavy winds or inclement weather.
4. Do not leave up this unit for extended periods of time, as it is not a
permanent structure or designed to withstand sustained wind or rain.
It is a temporary, portable shelter that shields you from sunlight and rain.
The screens also block flying insects.
5. Do not use candles, matches, or any open flames near the tent.
6. To better align the screws for practical situations, do not fully tighten
screws initially.
7.Professional installation is highly recommended.

ASSEMBLY INSTRUCTIONS
2
G1 X2
G3 X2
G4 X2
G2 X2
G5 X2
G7 X2
G8 X2
G6 X2
HX4
JX4
KX4
X4
K1
H1 X4
Item no. Reference Image Qty.
LX1
NX12
N1 X4
MX1
PX4
ZX56
Z1 X24
TX4
T1 X4
UX104
W1 X4
W2 X4
WX4
Item no. Reference Image Qty.

YX104
W3 X4
V2 X2
V3 X2
V1 X2
Q1 X2
Q3 X2
Q4 X2
Q2 X2
Q5 X2
SX2
Sa X2
Q6 X2
Item no. Reference Image Qty.
ASSEMBLY INSTRUCTIONS
3
M6X16mm
1
R2 X2
R1 X2
R4 X2
R5 X2
R3 X2
R6 X2
R8 X2
S1 X2
R7 X2
S2 X2
S4 X2
X144
S3 X2
Item no. Reference Image Qty.