Yolink YS7201-UC Operation manual

Vibraon Sensor
YS7201-UC
Installaon & User Guide
Rev 1.0

Sincerely,
Emily, Clair, James, Eric
Customer Support Team
Thank you for purchasing YoLink products and for entrusng us with your smart home needs!
Your 100% sasfacon is our goal. If you experience any problems with seng up your new
YoLink Vibraon Sensor, please give us a chance to assist you, before returning your
purchase.
We at Customer Support are here for you.If you need any assistance installing, seng up or
using a YoLink product or our app.
Find addional support and ways to reach us at:
www.yosmart.com/support-and-service
Or scan this QR code with your smartphone
Email us, 24/7 at:
[e-mail]
Call us, 9AM to 5PM Pacific Standard Time at:
[phone]
You may chat with us on Facebook (non-urgent maers):
www.facebook.com/YoLinkbyYoSmart

Contents
A.
B .
C .
D.
E .
F .
G.
H.
I .
J .
K .
In the Box ······· ····· · ·· · ··1······················ ····· ···················································· · ·
·Introducon ······························································································ 2
Set Up ····································································································· · 4· ·
Installaon ······························································································ · 6· ·
Using the YoLink App ·················································································12
YoLink Control ···························································································19
Maintenance ······················································································· ····23·
Specificaons ····················································································· ·····26·
Troubleshoong ················································································· ·····27·
Warning ······························································································ ····28·
Customer Service & Warranty ······························································· ····30·
Revised: 09/26/2021
Copyright 2021 YoSmart Inc. All rights reserved©

1
A. In the Box
A. Vibration Sensor
B. Quick Start Guide
B.
A.

2
B. Introducon
T h e V i b r a  o n S e n s o r c a n b e u s e d t o d e t e c t v i b r a  o n i n a n a r e a * , a n d b a s e d o n t h e
p r e s e n c e o r a b s e n c e o f v i b r a  o n i t c a n t r i g g e r a c  o n s b y o t h e r d e v i c e s . A c  o n s
m a y i n c l u d e t u r n i n g o n a n d / o r t u r n i n g o ff a l i g h t , a c  v a  n g a s i r e n a n d / o r s e n d i n g
a n o  fi c a  o n v i a t h e Yo L i n k a p p . W h e n v i b r a  o n i s d e t e c t e d , t h e L E D w i l l b l i n k r e d
o n c e , a n d n o  fi c a  o n s w i l l b e s e n t t o y o u v i a t h e Yo L i n k a p p . A v a i l a b l e n o  fi c a  o n
t y p e s a r e : e m a i l , S M S / t e x t * , a n d b a n n e r ( “ p u s h ” ) n o  fi c a  o n s o n y o u r A p p l e o r
A n d r o i d s m a r t p h o n e , e a c h c o n fi g u r a b l e i n a p p s e  n g s .
*A pplica ons inc lude b ut are not limited to: for detecon of trespass ers/intruders on safe
box , gun box, win dow / door, drawer, mai lbox, wash ing m achine and d r yer
SET Buon
Baery Compartment
Includes two AAA
non-rechargeable baeries
Status LED
Mounng Hole
Used for wall-mounng the
sensor

The LED light indicates the current status of the Vibraon Sensor:
3
Blinking Green
Connecng to Cloud
Slow Blinking Green
Updang
Blinking Red And Green Alternately
Restoring to Factory Defaults
Blinking Red Once, then Green Once
Device Turned On
Fast Blinking Green
Establishing Connecon with YoLink System (YoLink Control)
Fast Blinking Red
Removing Connecon to YoLink System (YoLink Control)
Blinking Red Once
Device Alerts or Device is Connected to the Cloud and is Funconing
Normally
Fast Red Every 30 Seconds Blinking
Baeries are Low; Please Replace the Baeries (see page 25)

C. Set Up
C-1. Set Up - First-Time YoLink Users (Exisng users proceed to C-2. Add Device, next page)
T h e Yo L i nk H u b i s re q u i re d
to s e t u p yo u r V i b r a  o n
Se n s o r. P l e a s e s e t u p y o u r
Yo L i n k H u b fi r s t (refe r t o
Yo L i n k H ub m a n u a l )
3
Power
Adapter
YoLink Hub
Log in to the YoLink app
2
Create a new account if
required
Download the YoLink app through
Apple App Store or Google Play
Store (Search in the store or use
the QR code on the right)
1
Apple iPhone or tablet that is iOS 9.0
or higher, or an Android phone or
tablet that is Android 4.4 or higher
YS1603-UC
User Guide
2. Ethernet patch cable (included) to
your network (router, switch, etc.),
recommended. Otherwise connect
your Hub to your home 2.4 GHz Wi-Fi
network (only when necessary).
Refer to the Hub set up manual for
more informaon:
1. Make sure your Hub is connected
to the internet (green LED indicator is
blinking, blue LED indicator is always
on)
4

C-2. Add Device
Ta p “ ” bu  o n , th e n sc a n Q R
C o d e o n t h e d e v i c e . Fo l l o w t h e
ste p s t o a d d th e de v i c e
1
1. You will need to press the SET buon once again if the device failed to connect to the cloud
2. Pressing the SET buon at any other me aer this inial process will result in the LED blinking
red once, only. This indicates the device is connected to the cloud and is funconing normally
3. If the red LED does NOT blink as noted this may indicate a problem with the sensor. Please see
the troubleshoong secon and the contact secon for technical support
Press the SET buon (on front of
the device) once to turn on the
device. The Status LED will blink
re d o nc e , t he n gre e n s evera l
mes, indicang your device has
connected to the cloud and is
ready to use
2
5
SET Buon

D. Installaon
Test your v i brao n sensor locaon b efore affixing it to the surface. Use m asking o r
pa i nters tape to secure the sensor to the surface. Once you have the senso r tem p orarily
mo u nted, test i t out. Wit h the app in h a n d, vibrate t he detecon area w h ile obs e r vi n g
th e status of the sensor as shown on the app (V i brao n Detec ted or No Vibra o n
Dete c ted) . Oponally, you may set up your auto m aon (e.g. turn on a light on vibraon
detecon) to funconally test the vibra o n - p roc e e d to the fo l lowing steps fo r
informaon on c reang a u tomaons, t hen return to t h is step
The vib ra on sen sor can be installed in several ways. It can be affixed to the object via
3M mounng tape ( included), it can be m ounted to the object via screws (not included),
or it can be p laced in or on an object. Other method s may void the warranty (e. g. glue,
epoxy).
D-1. Test the Vibraon Sensor Locaon Before Installaon
6
You can adjust the device s e n s i  vity to re d u c e false a l e r ts. Dete r m i n e if th e sensivity
is too lo w or too high du r i n g your fu n c  o n al test. If th e senso r trig gers false alerts, you
ca n redu c e the s e n s i  v i t y. If t h e sensor d o e s not respond to a condion t h at s hould
trigger an alert, incre a s e th e se n sivity. A er adjusng t he s e n s i  vity, always pe r fo rm
a f u n conal test.
The v i b raon sensor is not waterproof and is designed and intended only for indoor use

D- 2. A ppl ica ons
7
Safe (and Gun) BoxDrawerMail Box
Door
Factors s u c h a s tem pe rat ure ca n
a d v e rs e l y im p a c t th e o p e r a  o n
of t h e s e n s o r. U si ng the sen so r
ou t d o o rs a nd /o r i n e nvi ro nm e nta l
con di  on s out s id e tho s e liste d in
th e Environ m en t a l s e c on o f t he
ma n ua l (p a ge 26 ) i s dis cou raged .
A d d i  o n a l l y, th e wa r ra nt y do e s
no t cover the d evi ce geng wet.
Window
Washer & Dryer

8
D-3. Begin Installaon
D- 3 -1 . M eth o d A : In sta ll
th e Vi b ra o n Sen s or wit h
do u bl e -s id e d t a pe on t h e
ba c k of th e de v ic e
F i n d a s u i t a b l e l o c a  o n f o r
t h e s e n s o r. C l e a n t h e s u r f a c e
w e l l a n d a l l o w i t t o d r y. T h e
s u r f a c e m u s t b e f r e e o f
m o i s t u r e , d i r t , o i l , g re a s e o r
c l e a n i n g c h e m i c a l s
1
R e m o v e t h e p r o t e c  v e
p l a s  c f r o m t h e t a p e
b y p e e l i n g b a c k f r o m a
c o r n e r
2
Doubl e -side d mounng
tape is very difficult to
r e m o v e . U s e c a u  o n
mounng the d e v ice to
delicate sur face s
Pla c e the sens o r a t the de sired
locao n , pre ssi n g fir m l y for at
lea st 5 s e co nds
3

9
D-3- 2 . Meth o d B : Mou nt the Vi b raon Se n sor to th e s urface wi th sc rews (n o t i n c l u d e d )
O p e n t h e b ae r y
cover and re mo ve
t h e b a  e r i e s t o
ga in ac ce s s to t h e
mo u nn g ho le s o n
t h e b a c k o f t h e
se n so r
1M o u n t t h e s e n s o r
t o t h e d e s i r e d
l o c a  o n u s i n g
s c r e w s
2R e i n s t a l l t h e
b a  e r i e s a n d
c l o s e t h e b a  e r y
c o v e r
3

D - 3 - 3 . M e t h o d C : P l a c e i n o r o n a n o b j e c t y o u w a n t t o m o n i t o r
1. In a drawer
Example s
2 . I n a s t o r a g e b o x , s a f e ,
s e c u r i t y b o x , o r c a b i n e t
10
P l a c e , affi x or i n s t a l l t h e s e n s o r a t a l o c a  o n m o s t - l i ke l y t o d e t e c t t h e m o n i t o r e d c o n d i  o n .
M o u n  n g t h e s e n s o r o n t h e d o o r o r l i d o f a b o x o r c a b i n e t w i l l d e t e c t v i b r a  o n fa s t e r t h a n o n l y
i f p l a c e d i n s i d e t h e b o x o r c a b i n e t

D-4. Test the Vibraon Sensor
I t i s b e s t t o p e r f o r m a ‘ f u n c  o n a l t e s t ’ o f t h e s e n s o r. F o r e x a m p l e , i f a n a l e r t i s
d e s i r e d w h e n a fi r e a r m s t o r a g e b o x i s o p e n e d , f o r y o u r f u n c  o n a l t e s t y o u s h o u l d
o p e n t h e b o x . I n t h i s e x a m p l e , i t i s s u g g e s t e d t o t e s t o p e n i n g t h e b o x w h e n i t i s
u n l o c ke d . T h i s w o u l d p ro v i d e p r o t e c  o n o f t h e b ox e v e n i f i t w a s l e  u n l o c ke d
H a v e t h e a p p o p e n w h i l e p e r fo r m i n g t e s  n g . C o n fi r m t h e c o r r e c t s r e s p o n s e o f t h e
s e n s o r
A d j u s t t h e s e n s o r s e n s i  v i t y a s n e e d e d . A l w a y s p e r f o r m a f u n c  o n a l t e s t , i f
p o s s i b l e , a  e r a d j u s  n g t h e s e n s i  v i t y
11

E. Using the YoLink App
E-1. Device Page
Connecon Status
of and HubVibraon Sensor
Baery Level of Vibraon Sensor
Shown red if baery level is low-
Details
- Tap to go to Details page(refer to page 13 & 14)
Device alert history
Vibraon detected and cleared events, logged with date & me
- Tap to get device manual link, feedback, contact us informaon, etc.
12
Real-me status of Vibraon Sensor:
No detected or detected vibraon vibraon

E-2. Details Page
Aer c h ang ing “ T ime to enter No-V i braon S tate” and / or “Sensi vity ” se ngs, press the device’s
SET bu  o n once , to sync th e n ew sen g s to t he devi ce. Ot h erw ise, t h e devic e w ill au tomacal l y
upd ate w ith i n 4 h ours ( m axim u m)
f. Restore Device to normal monitoring status aer no vibraon detected
for a set me
- Default is set to be 1 minute
a. Device Type
c. Choose a Room for device
e. Add/Remove from favorites
b. Rename the Device
d. Alarm Strategy
- Select an alarm strategy for the device, default is Alarm Strategy (Default)
g. Switch Sensivity of detecon for the Vibraon Sensor
- Tap to get device manual link, feedback, contact us informaon, etc.
h. Send Noficaon to you when the vibraon is detected again aer a set
me
13

i. Real-me Status: Normal, Warning
j. Device Model
k. Device EUI (unique)
l. Device SN (unique)
n. Connecon Status of sensor and Hub
o. Current Baery Level
Shown red if baery level is low-
p. Firmware Version
- “#### ready now (refer to page 23)” indicates a new update is available
q. Remove Device From Current Account
Tap to delete the device from your YoLink account-
m. Temperature Value
- Updates when:
1. SET buon pressed
2. On a device alert
3. Baeries are replaced
4. Automacally within 4 hours maximum
14

E-3. Device Alerts
E n a b l e a l e r t s i n d e v i c e s e n gs to u s e yo u r v i b ra o n se n s o r fo r in t r u s i o n de t e c  o n o r
o t h e r c r i  ca l f u n c  o n s . U p o n t h e d e t e c  o n o f v i b ra o n , a n a l e r t w i l l b e s e nt to y o u r
Yo L i n k ac co u n t
15

E-4. Automaon
Vibraon Sensor can be set as a trigger only, with two trigger opons: Vibraon Detected; No Vibraon
Detected
a. Tap the “+” icon to add
an automaon
b. Add an automaon
b-1 Edit name
b-2 Edit trigger
b-3 Edit behavior (You must have at least one acon
device, or you cannot set a behavior)
b-4 Edit when (Set a me range for the automaon:
always or during specific days or mes)
b-5 Tap to save the sengs
1. Tap “ ” buon to enable or disable the
automaon
2. Swipe le to view the history logs and to edit or
delete the automaon
c. Click to edit the automaon
Swipe Le
a.
Go to the “Smart” screen, tap “Automaon”
b-1
b-2
b-3
b-5
b-4
c.
16

E-5. Alarm Strategy
Set up rules to acvate scene or alarm when a device alert is detected (such as Vibraon Sensor,
Water Leak Sensor, Moon Sensor, etc.). Follow instrucons below to enable Device Alert first
Go to Sengs > Alarm Strategy for noficaons preferences sengs (Only support Host account)
Tap “ ” in the upper le corner to go to My Profile
a. Alarm Strategy Sengs
a-1 The alarm strategy
should be enabled
(Noficaon will be sent)
a-2 Noficaon will not be
sent during the Do Not
Disturb me
a-3 Select a siren alarm (controller)
a-1
a-2
a-3
b. b. Device Alert
should be
enabled
c. Siren Horn or other alarm
device will be activated when
an alert is received
17