Yolink YS7804-UC User manual

User Guide
YS7804-UC
Motion Sensor

Contents
Introduction················································1
Features··················································· 2·
Product Requirements···································2
What’s In The Box··········································2
Set Up Motion Sensor·····································3
Using YoLink App with Motion Sensor···············10
Maintaining the Motion Sensor························15
Specifications············································17
Troubleshooting·········································18
Installation··················································7
YoLink Control············································12
Customer Service & Warranty ·························19

Introduction
Motion Sensor is widely used in moving human body detection. Download YoLink App,
add Motion Sensor to your smart home system, which will able to monitor your home's
security in real time.
1
LED lights can show the current status of device. See the explanation below:
SET BUTTON
Red Once
Alert.
Blinking Green
Connecting to cloud.
Fast Blinking Green
Set up connection with devices.
Fast Blinking Red
Remove connection with devices.
Blinking Red and Green
Factory resetting.
Slow Blinking Green
Updating.
DETECTION WINDOW

Features
Real-time Status - Monitor the real-time state of movement via YoLink App.
Battery Status - Update battery level and send low battery alert.
YoLink Control - Trigger an action of certain YoLink devices without internet.
Automation - Set up rules for “If this then that” function.
2
What’s In The Box
Qty 1 - Motion Sensor
Qty 2 - Screw
Quick Start Guide
Product Requirements
A YoLink Hub.
A smartphone or tablet running iOS 9 or higher; Android 4.4 or higher.

3
Set Up Motion Sensor
Follow the steps below to set up your Motion Sensor via YoLink App.
Step 1: Set up YoLink App
Get the YoLink App from the Apple App Store or Google Play.

If you don’t have a YoLink account, tap Sign up for an account and follow the steps
to sign up an account.
Open the App. Use your YoLink account to log in.
Step 2: Log in or sign up with YoLink account
4

Step 3: Add device to YoLink App
b. Room - Choose a room for Motion Sensor.
a. Name - Name Motion Sensor.
You can customize the name, set the room, add to/remove from favourite.
Tap the “ ” in YoLink App. Scan the QR Code on the device.
Tap the “Bind Device” to add the device to your YoLink account.
c. Favourite - Click “ ” icon to add/remove from Favourite.
a
b
c
5

Step 4: Connect to the cloud
Cloud
SET BUTTON
Internet
Note
Make sure you hub is connected to internet.
Press the SET button once and your device will connect to the cloud automatically.
6

Installation
Recommended Installation
Diameter: 6-8m
Installation
Height: 3-4m
CEILING
7

Ceiling and Wall Installation
WALL
CEILING
Please use the screws to stick the plate to wherever you want to monitor.
Please connect the sensor to the plate.
Note
Please add motion sensor to YoLink App before you install it.
8

A movement is detected, an alert will send to your YoLink account.
Note
Interval between two alert will be 1 minute.
Device will not alert twice if movement is under
continuously detection in 30 minutes.
Using YoLink App with Motion Sensor
Device Alert
9

Using YoLink App with Motion Sensor
Details
a. Name - Name Motion Sensor.
b. Room - Choose a room for Motion Sensor.
You can customize the name, set the room, add to/remove from favourite, check device
history.
d. History - Check the history log for the Motion Sensor.
Tap the “Motion Sensor” in App to go to its controls.
f. Delete – The device will be remove from your account.
Tap the icon for each of the settings you want to
personalize.
Tap the “ ” icon at the top-right corner to go to
details.
c. Favourite - Click “ ” icon to add/remove from
Favourite.
a
b
c
d
e
10

Automation
Automation allows you to set up “If This Then That” rules so the devices could act
automatically.
Tap “Smart” to switch to Smart screen and tap
“Automation”.
To set an Automation, you will need to set a
trigger time, local weather condition, or choose a
device with certain stage as a triggered condition.
Then set one or more devices, scenes to be
executed.
Tap “ ” to create an automation.
11

YoLink Control is our unique “device to device” control technology. Under YoLink Control,
the devices could be controlled without internet or Hub. Device which send out command
is called controller(Master). Device which receive command and act accordingly is called
responder(Receiver).
YoLink Control
You will need to set it up physically.
Find a motion sensor as controller(Master). Hold
the set button for 5-10 seconds, the light will flash
green quickly.
After pairing succeed, the light will stop flashing.
Find an action device as responder (Receiver).
Hold the power/set button for 5-10 seconds, the
device will enter the pairing mode.
When the motion is detected, the responder will
turn on as well.
Pairing
SET BUTTON
12

Un-pairing
SET BUTTON
Find the controller(Master) motion sensor. Hold
the set button for 10-15 seconds, the light will
flash red quickly.
The above two devices will unpair by themselves
and the light stops flashing.
Find the responder(Receiver) action device.
Hold the power/set button for 10-15 seconds,
the device will enter the un-pairing mode.
After unbundling, when the motion is detected,
the responder will no longer turn on.
YS6602-UC YoLink Plug
Responder List
YS6604-UC YoLink Plug Mini
YS5705-UC In-wall Switch
YS6704-UC In-wall Outlet
Continuously ..updating
YS6801-UC Smart Power Strip
YS6802-UC Smart Switch
13

PAIRED UNPAIRED
ALERT
TURN ONTURN OFF
ALERT
TURN OFFTURN OFF
YoLink Control Diagram
14

Maintaining the Motion Sensor
Firmware Update
Ensur e o u r c u s t o me r h a v e t h e b e s t u s er e x p e ri e n c e . H i g h l y r e co m m e n d y o u c o u l d
updat e o u r n e w e s t v e r s i o n fi r mw a r e .
Note
Only the Motion Sensor that is currently
reachable and has an available update will be
shown on the Details screen.
The light will be slowly blinking green during the
update and stop blinking when the update done.
Tap “Firmware”.
Tap the “ ” icon at the top-right corner to go to
details.
Tap the “Motion Sensor” in App to go to its controls.
15

Factory Reset
SET BUTTON
Factory reset will erase all your settings and bring it back to default. After the factory reset,
your device will still in your Yolink account.
Hold the set button for 20-25 seconds until the LED blinks red and green alternately.
Factory reset will be done when the light stops flashing.
16

Specifications
Detection Angle: 360° (Ceiling), 120° (Wall)
Installation Height:
Voltage: 3V DC (1-CR123A battery)
3m (Ceiling), 1.5m (Wall)
Environment: Temperature: 0°C~50°C (32°F~122°F)
Humidity: 0%~95% non-condensing
17

Troubleshooting
Problem Possible Reason Solution
Detection not work. Temperature is too low or too high. The most suitable temperature will be
5 (77°F).2 ℃
No alert or light. Motion sensor is battery died. Please replace the battery.
Motion sensor is
offline.
Hub is offline.
Please reconnect your hub to the Internet
and press the set button of Motion Sensor
once.
Hub is powered off. Please power on the hub again and press
the set button of Motion Sensor once.
Motion sensor is battery died. Please replace the battery.
Device malfunction. Please contact customer service.
LED blinking, no alert. Notification has been turned off in
YoLink App.
Please turn notification on in the setting
page of YoLink App.
Alert received in App
but no LED blinking. Product defective. Please contact our customer service.
18