YOTRIO HARBOR User manual

THE ASSEMBLY INSTRUCTION
OF
HARBOR GAZEBO
“ ARNING: KEEP ALL FRAME AND HEAT SOURCES AWAY FROM THIS
GAZEBO FABRIC.
W
This Gazebo is made with fabric that meets CPAI-84 specifications for flame
r sistance. It is not fire proof. The fabric will burn if left in continuous contact
with any flame source. The application of any foreign substance to the Gazebo
f bric may render the flame-resistant properties ineffective. ”
e
a
Yotrio Corporation
708 Nogales St.,
City of Industry, CA 91748
Country of Original: China
Code #: Yotrio 2012
Caution:
This Gazebo is made for the explicit purpose of providing outdoor furniture and
is not to be used as a toy. This product is no intended for inclement/severe
weather in any form including, but not limited to: rain, hail, sleet, snow and/or
wind. The manufacturer recommends that with formidable weather
approaching you remove the Canopy, Screen, Shade Walls and Lanterns. Do
not shake, lean or climb on it. A competent adult should supervise children
under the age of 10 at all times whenever near the patio set. This product is
NOT intended for commercial use and will void the warranty.

LIMITED WARRANTY
Yotrio Corporation, City of Industry, CA. 91748, extends a one frame and
one year fabric limited frame warranty to the original purchaser as a sign
of our dedication to the highest possible quality standards. The warranty
is designed to cover Harbor Gazebo under normal residential use. This
Warranty is non-transferable and void if the furniture is used in
non-residential environment and/or has been abused. The warranty also
becomes void in the event the Harbor Gazebo has been damaged by acts
of God, calamity or misuse. This warranty does not cover in the event of
inclement weather such as rain, hail, sleet, snow or wind. We reserve the
right to make substitutions with similar merchandise, if the model in
questions is no longer in production. The manufacturer recommends
that with ANY formidable weather approaching you disassemble and
store your Harbor Gazebo in a safe location.
For further details please refer to the CAUTION warning section of this
Assembly instruction.
CARE INSTRUCTIONS

For best results, clean frame with damp cloth and dry thoroughly. This
will help prevent mildew by removing dirt particles that may accumulate.
Do not use abrasive materials or cleaners. In order to prolong the life of
your gazebo when not in use or inclement weather (rain, hail, sleet, snow,
wind), fire, extreme heat and freezing conditions, the gazebo needs to be
stored in a dry, sheltered place. In addition, when not in use your gazebo
needs to be stored.
















DONOTRETURNTORETAILER
IF YOU HAVE ANY QUESTIONS OR CONCERNS
PLEASE VISIT OUR WEBSITE AT:
www.yotrioint.com
OR TOLL FREE AT:
1-888-628-1888
MONDAY-FRIDAY 8:30 AM TO 5:00 PM PACIFIC STANDARD TIME / 11:30
AM TO 8:00PM EASTERN STANDARD TIME
YOTRIOCUSTOMERCARE




















WarrantyCoverageRequirements:

1. CopyofyourOriginalStoreReceipt.
2. Picturesofthedamagedparts.
3. Youmustknowthenameofyourproductandanycorrespondingitem
numbersaswellasthenameofthestorewhereyoupurchasedtheitem.
4. PleasegatherallofthisinformationBEFOREyoucallcustomerservice.

ASSEMBLY INSTRUCTION
Parts No QTY Description Name
A 4pcs Pillar A
B 4pcs Pillar B
C 4pcs Pillar C
D 8pcs Panel
E 4pcs Beam E
F 4pcs Top Tube F
G 4pcs Top Tube G
H 4pcs
Top Tube H
I 4pcs Top Tube I
J 1pc Canopy Hub J
K 1pc Canopy Hub K
L 4pcs Foot Edge

ASSEMBLY INSTRUCTION
PARTS LIST
Parts
No QTY Description Name
M 4pcs Beam M
N 1pc Canopy Fabric O
O 1pc Canopy Fabric P
P 2pcs Sidewall
Q 4pcs Netting
R 40pcs Plastic Ring
S 8pcs Decorative Ball
T 32pcs M6x25mm Bolt
U 40pcs M6x15mm Bolt
V 4pcs M6x28mm
Bolt&Nut
W 4pcs Ground Spike
Y 1pc Screwdriver
Z 1pc Wrench
Z1 4pcs Corkscrew
Ground Spike

STEP #1
Tighten the Decorative Ball (S) on the top of Pillar B and Pillar C separately;
line up the bolt holes on the Pillar A, B and C with corresponding bolt holes on
the Panels (D). Screw the Bolts (T) on. Screw the Bolts (U) on the Foot Edge
(L) together with Pillar A, B and C. See Fig. 1
Note: Make sure the direction of Pillar B and C.
STEP #2
Insert the Beam (E) into the Beam (M). Line up the bolt holes on them and
screw the Bolts (U) on. See Fig. 2

STEP #3
Line up the bolt holes on the ends of the connected Beams (E) with the
corresponding bolt holes on the Pillars (A). Screw the Bolts (U) on. See Fig. 3
Note: Make sure that the round tube of the beams is in the inside.
STEP #4
Insert the Top Tubes (F) into the Top Tubes (G). Then insert the Top Tube (G)
and Top Tube (H) into the Canopy Hub (K). Screw the Top Tubes (F) together
with the Pillars (A) with the Bolts (V). Screw the Top Tubes (H) together with
the Beams (E) with the Bolts (U). See Fig. 4
Note: Insert the Top Tubes (G) into the long Tube of the Canopy Hub (K).

STEP #5
Place the Canopy Fabric (O) on the roof. See Fig. 5
STEP #6
Insert the Top Tube (I) into the Canopy Hub (J) and insert the Top Tube (I) into
the Top Tube (G). See fig. 6

STEP #7
Place the Canopy Fabric (N) on the Top Tube (I) then tighten the Canopy
Fabric (O) in place. Put up the two Side Walls (P) on the Beams (E). Note: The
Harbor Gazebo package includes two privacy side walls. This is designed to
be used for half of the gazebo. See Fig. 7
STEP #8
Put up the Netting (Q) on the Beams (E) by the Plastic Rings (R). See Fig. 8

STEP #9
Put the Corkscrew Ground Spike (Z1) through the hole on the flat bars on the bottom of Panel
(D) first and then twist the Corkscrew Ground Spike (Z1) down into the ground until Panels
(D) are secure, see Fig. 9. Once the Corkscrew Ground Spikes are secured. Pound the Ground
Spikes (W) through the holes on the flat bars on the bottom of Panels (D) see Fig. 9.

















INSTRUCCIONESDEENSAMBLAJE
DE
La Carpa Harbor

ALTO
NO DEVOLVER AL MINORISTA
SI TIENES PREGUNTAS O INQUIETUDES
VISITA NUESTRO SITIO WEB:
www.yotrioint.com
O LLAMAAL NÚMERO GRATUITO:
1-888-628-1888
DE LUNES AVIERNES, DE 8:30 A.M. A5:00 P.M. HORA ESTÁNDAR DEL
PACÍFICO / DE 11:30 A.M. A 8:00 P.M. HORA ESTÁNDAR DEL ESTE
SERVICIO AL CLIENTE DE YOTRIO



















Requisitos para la cobertura de la garantía:

1. Copia del recibo original de compra.
2. Imágenes de la pieza dañada.
3. Debes conocer el nombre de tu producto y cualquier otro número del artículo
correspondiente así como el nombre de la tienda donde lo compraste.
4. Por favor reúne toda esta información ANTES de contactar con el servicio al
cliente.


















 





9
9