Zavio F3101 User manual

Wireless N Megapixel Network Camera

F3101/3106

86085L1000020

Package Contents

Camera – F3101/3106 Network Camera

Quick Installation Guide –To provide brief product information and

quick installation and wireless setting.

Software CD – Free bundled IP surveillance software, Intelligent IP Installer,

user manual and language packs.

Ethernet cable – Assist to setup your IP Camera.

Mounting Bracket – There are three components including lock ring,

brace, and base plate to compose a bracket and three applied screws to fix

the base plate to a flat surface. (horizontal or vertical)

Adaptor – 12V DC, max 12W

Package Contents

a. Wall mounting and Ceiling mounting

1. Use the 3 supplied screws to fix the base plate to a flat surface.

2. Loosen the lock ring to adjust the desired angle of the camera.

3. Tighten the lock ring.

b. Connect cables and power supply

b1. Wire Connection

1. Connect the power adaptor to the IP Camera.

2. Use a standard RJ-45 network cable to connect the IP Camera

to the Network connection

b2. Wireless Connection (F3106)

1. Connect power adaptor to the IP Camera.

2. Connect to Wi-Fi.

User Interface

Power on your PC and insert the CD-ROM. The setup page will show up

automatically. Please follow these steps to install the firmware.

Select “Intelligent IP Installer” and follow the installation process to

complete the installation.

1. Before using Intelligent IP Installer, please check two settings.

a. Browser’s Internet Properties

 Security Default Level

b. Browser’s Internet Properties 

Privacy  Uncheck Pop-up Blocker

User Interface

2. Click the Intelligent IP Installer Icon on your desktop. The main page will

show up listing all active camera and video server devices. Select the

relevant IP camera from the list and click Link to IE.

3. Enter your Username and Password

to login to the IP Camera.

(Default is admin / admin)

4. When accessing the IP Camera for the first time, a yellow information

bar appears below the address bar: This website wants to install the

following add-on: ‘AxvideoView.cab from ‘Zavio Inc’.

5. Click the information bar, and select Install ActiveX control.

User Interface

6. Click Install.

7. Live video displays in the centre of your web browser.

1. Select Safari icon

2. Click Bonjour function and select

the camera you wish to access.

User Interface

3. Enter name and password to login to

the IP camera. (Default is admin/admin)

The default setting of lighting environment is Auto. However, you may also

select 50 or 60 Hz upon the lighting environment of your country.

Go toȾSetting  Basic  Camera Advancedȿ, choose the environment setting

you wish.

Use the settings screen to set the language of the Web Interface.

Go to “Setting  Basic  System Language”.

1. Insert Software CD into your CD-ROM.

2. Browse and select the preferred language from language pack in the

Software CD and then click OK.

3. The web interface will change into your preferred language.

4. The monitor image will be

displayed in your browser.

User Interface

1. Using IP Camera via iPhone

Select Safari function  Enter IP address in the web link  enter username

and password (default value admin/admin)  The Zavio user interface and

Live Image will show up in the middle of the screen.

2. Mobile phone viewing

a. 3G Mobile Phone Streaming Viewing

For 3G mobile phone viewing, please type

“ rtsp://<IP>:<PORT>/video.3gp ” into your 3G web media player.

<IP> is the IP address of your IP camera;

<PORT> is the RTSP port of your IP camera (Default value is 554.)

Example: rtsp://100.10.10.1:554/video.3gp

b. 2.5G Mobile Phone Viewing

b1. WAP viewing

For 2.5G WAP mobile phone viewing, type “ http://<IP>/mobile.wml ”

into your 2.5G web browser.

b2. Browser viewing

For 2.5G mobile phone browser viewing, type “http:// <IP>/mobile.htm ”

into your 2.5G web browser.

a. Internet connectivity of the IP camera can be established by inputting the

cameras IP information within the Information section.

(Please go to Setting  Basic  Network Information)

User Interface

b. Internet Connectivity of the IP Camera can be established through

PPPoE (Point-to-Point Protocol over the Ethernet) by inputting the

username and password from your Internet Service Provider (ISP)

within the PPPoE section.

(Please go to Setting  Basic  NetworkPPPoE)

Note 1: Please reboot the IP Camera, after changing the PPPoE settings.

Note 2: Please turn on the DDNS and IP Notification function when

using the PPPoE function.

c. Internet Connectivity of the IP Camera can be established if your router

is UPnP(Universal Plug and Play) enabled. The IP camera is automatically

detected and added to “My Network Places” on your computer. Please

note that only Home Routers manufactured after 2006 support the UPnP

function.

c1. If your router is a UPnP Internet Gateway Device (IGD), turn on the

UPnP function within the UPnP section. (Please go Setting Basic

Network  UPnP)

Note: If you turn on the UPnP Port Forwarding function, RTSP (Real

Time Streaming Protocol) Port information will change to the

illustrated value below.

c2. If your router is not a UPnP Internet Gateway Device, please setup Port

Forwarding or Port Mapping

Note 1: Home Routers manufactured before 2006 do not support UPnP

IGD function.

Note 2: Enterprise Routers do not support UPnP IGD function.

User Interface

Application of IP Camera

MEMO

……………………………………………………………………………………

MEMO

……………………………………………………………………………………

MEMO

……………………………………………………………………………………

MEMO

……………………………………………………………………………………

Zavio F3101 User manual

Popular Security Camera manuals by other brands