Zavio D611E Instructions for use

N7130 User Manual
0

N7130 User Manual
1
N7130 CCD Dome IP Camera
Hardware User Manual
-Contents-
CHAPTER 1. SAFETY INSTRUCTION........................................................................................2
CHAPTER 2. INTRODUCTION.....................................................................................................4
CHAPTER 3. PACKAGE CONTENTS ..........................................................................................5
CHAPTER 4. PHYSICAL DESCRIPTION....................................................................................6
CHAPTER 5. BASIC CONNECTION ............................................................................................8
5.1 POWER OVER ETHERNET (POE) CONNECTION......................................................................................................8
5.2WITHOUT POECONNECTION .................................................................................................................................8
CHAPTER 6. APPLICATION..........................................................................................................9

N7130 User Manual
2
Hardware User Manual
Chapter 1. Safety Instruction
Before you use this product
This product has been designed with safety in mind. However, the electrical products can cause
fires which may lead to serious body injury if not used properly. To avoid such accidents, be sure to
heed the following.
Legal Caution
Video and audio surveillance can be forbidden by laws that vary from country to country. Check the
laws in your local region before using this product for surveillance purposes.
Don't use the accessories not recommend by the manufacturer
Heed the safety precautions
Be sure to follow the general safety precautions and the “Operation Notice.”
Operation Notice - Operating or storage location
Avoid operating or storing the camera in the following locations:
Extremely hot or cold places
(Operating temperature: 0 °C to + 50 °C [32 °F to 122°F] )
Exposed to direct sunlight for a long time, or close to heating equipment (e.g., near heaters)
Close to water (e.g.,near a bathtub, kitchen sink, laundry tub)
Close to sources of strong magnetism
Close to sources of powerful electromagnetic radiation, such as radios or TV transmitters
Locations subject to strong vibration or shock

N7130 User Manual
3
In case of a breakdown
In case of system breakdown, discontinue use and contact your authorized dealer.
In case of abnormal operation
If the unit emits smoke or an unusual smell,
If water or other foreign objects enter the cabinet, or
If you drop the unit or damage the cabinet:1 Disconnect the cable and the connecting cables. 2
Contact your authorized dealer or the store where you purchased the product.
Transportation
When transporting the camera, repack it as originally packed at the factory or in materials of equal
quality.
Ventilation
To prevent heat buildup, do not block air circulation around the device.
Cleaning
Use a soft, dry cloth to clean the external surfaces of the device. Stubborn stains can be
removed using a soft cloth dampened with a small quantity of detergent solution, then wipe dry.
Do not use volatile solvents such as alcohol, benzene or thinners as they may damage the
surface.

N7130 User Manual
4
Chapter 2. Introduction
The N7130 is the high-performance Dome IP Camera equipped with a Sony Super high-resolution
CCD sensor and wide angle Vari-Focal lens. N7130 also adds Power over Ethernet as well as
digital input / output for external alarm or sensor.
Key Features:
1/3” Sony Super HAD High Resolution 520 TVL CCD Sensor
Improve Quality with De-interlace Filter
3.7-12mm Vari-Focal lens
Support AGC, AES, AWB, Anti Color-Rolling
Power over Ethernet IEEE 802.3af Class 0 suppliers power to the camera via the network
Digital Input / Output Port for External Alarm & Sensor
Simultaneous MPEG-4 and Motion JPEG video stream
Excellent Image Quality with up to flexible 30 fps in Full D1 Resolution
Synchronized Two-way Audio
Optimal Synchronization of Audio and Video
Support Mac OS with Safari Browser
Support iPhone through Safari Browser
Mobile Phone Streaming Live Video through 3GPP / ISMA / RTSP
Mobile Phone Live Image through 2.5 WAP
Multi-level Password Protection for Restricting Camera Access
Built-In Multi-Window Motion Detection (3 detection areas)
Video Buffer makes the Streaming Smoother
UPnP and Bonjour for Fast and Easy Installation
DDNS Supported
Bundled 16 Channel Surveillance Software
User-friendly & Multi-lingual UI

N7130 User Manual
5
Chapter 3. Package Contents
Camera – N7130 CCD Dome Network Camera
Quick Installation Guide -To provide brief product information and quick installation and
wireless setting
Software CD - To provide IP Surveillance Software, Intelligence IP Installer, User Manuals, and
Language Packs
Screw Pack - There are two applied screws to fix the camera to a flat surface.
Adaptor - 12V DC, max 6W

N7130 User Manual
6
Chapter 4. Physical Description
Overview View
Power Connector - For connection of 12V DC input.
Audio Out (Green Line) - To support audio out with earphones or speakers for two way
audio
Audio In (Red Line) - To support audio in with Microphone for two way audio
Network Connector - For connection to the Ethernet via RJ-45 standard with PoE
Network Indicator (Green Light) - Green light will light up after the IP Camera
connected with network and IP Camera completed the boot process.
Network Transmit Indicator (Yellow Light) – Yellow light will light up when the data
is transmitting via internet.
I / O Terminal Connector – 1 Input / 1 Output to support External Alarm and Sensor used for
motion detection, event triggering and alarm notification…etc.
Video out (BNC) -To support one channel video output for easy use
Reset - When the device is empowered, press the Reset Button to reboot the device, or hold
the Reset Button for 10 seconds to set the device settings back to factory default

N7130 User Manual
7
DI / DO Terminal connector diagram
Please refer the following illustration below for connection method.
NO COM D- D+
Ground
Ground
12V
Max. 30W
Switch
Alarm out device
12V

N7130 User Manual
8
Chapter 5. Basic Connection
N7130 offers Power over Ethernet (PoE) connection. However, you still can use N7130 with PoE or
without PoE connection. You can follow the procedure below to connect the IP Camera for both
applications.
5.1 Power over Ethernet (PoE) Connection
1. Connect IP Camera’ Ethernet port to your Hub / Switch / Router supporting PoE
5.2 Without PoE Connection
1. Connect the power adaptor to IP Camera.
2. Connect IP Camera’ Ethernet port to your Hub/ Switch / Router

N7130 User Manual
9
Chapter 6. Application