Zeta ZRP/R User manual

Document No: GLT-271-7-1
Issue No: 005
Author: NRP Jones
Date: 26/01/2017
Page 4
CONVENTIONAL RAPTOR SOUNDER & SOUNDER BEACON - INSTALLATION MANUAL
Document No: GLT-271-7-1
Issue No: 005
Author: NRP Jones
Date: 26/01/2017
Page 1
CONVENTIONAL RAPTOR SOUNDER & SOUNDER BEACON - INSTALLATION MANUAL
For further information, including directional A-weighted sound output information
please see doc GLT-271-6-3 Conventional Raptor Sounder operation Data, available from
the manufacturer.
Troubleshooting
Problem Possible Cause
Sounder Circuit Showing Fault Check sounder wiring has correct polarity
Check that correct EOL is tted (consult panel manual)
Check that cables have not been swapped (eg out +ve
wire connected to out –ve terminal)
Check sounder fuse at control panel
No Sound Output from Sounder Check sounder wiring has polarity correct
Check sounder fuse at control panel
Other Information
Like all electronic equipment, at the end of it`s working life this unit should not be
disposed of in a refuse bin.
It should be taken to a local reprocessing site as per the guidelines of the WEEE
directive, for correct disposal.
CONVENTIONAL RAPTOR SOUNDER & SOUNDER BEACON
INSTALLATION MANUAL
Connections - First Fix
The loop wiring connects to terminals in
the back box.
Earth Positive
In/Out
Negative In
Negative
Out
Final Fix
• Set the sounder Tone (See Tone setting)
• Fix the BROWN sounder ying lead to
the POSITIVE terminal
• Fix the rst BLUE sounder ying lead to
the LEFT NEGATIVE terminal
• Fix the second BLUE sounder ying
lead to the RIGHT NEGATIVE terminal.
• Screw the sounder body to the
backbox.
Sounder Flying Leads
Backbox Sounder
Body
Description
The Raptor conventional sounder is a large
weatherproof horn sounder suitable for
many indoor & outdoor applications.
It is available in red or white and has a
selection of 22 tones.
Termination of eld wiring is made to the
backbox for a clean rst x.

Document No: GLT-271-7-1
Issue No: 005
Author: NRP Jones
Date: 26/01/2017
Page 2
CONVENTIONAL RAPTOR SOUNDER & SOUNDER BEACON - INSTALLATION MANUAL
Document No: GLT-271-7-1
Issue No: 005
Author: NRP Jones
Date: 26/01/2017
Page 3
CONVENTIONAL RAPTOR SOUNDER & SOUNDER BEACON - INSTALLATION MANUAL
Tone Setting
Tone SW1 SW2 SW3 SW4 SW5 SW6 SW7 SW8 Tone Description Pattern Frequency Rate Current (mA)
Sounder Only
Current (mA)
Sounder Beacon
dBA (Reverb.
Chamber)
0* ON ON ON ON ON ON ON ON BS Fire (Default Zeta tone) Alternating 800 & 970 1Hz (500ms-500ms) 8 59 107.0 (+/- 3dB)
1 OFF ON ON ON ON ON ON ON BS Fire Alternating 800 & 970 2Hz (250ms-250ms) 8 58 106.6 (+/- 3dB)
2 ON OFF ON ON ON ON ON ON BS Fire Sweep 800 to 970 1Hz (1 per second) 8 58 105.1 (+/- 3dB)
3 OFF OFF ON ON ON ON ON ON BS Fire Sweep 800 to 970 7Hz (7 per second) 8 58 104.2 (+/- 3dB)
4 ON ON OFF ON ON ON ON ON BS Fire Sweep 800 to 970 50Hz (50 per second) 8 58 103.3 (+/- 3dB)
5 OFF ON OFF ON ON ON ON ON German re (DIN 33 404) Sweep 1200 to 500 1Hz 8 58 104.2 (+/- 3dB)
6 ON OFF OFF ON ON ON ON ON French re (NFS 32-001) Alternating 554 & 440 100ms-400ms 8 58 102.5 (+/- 3dB)
7* OFF OFF OFF ON ON ON ON ON Dutch re (NEN 2575) Slow whoop 500 to 1200 3.5s sweep, 0.5 s silence, then repeat 8 58 104.9 (+/- 3dB)
8 ON ON ON OFF ON ON ON ON PFEER Toxic Gas Continuous 970 Steady 8 58 107.6 (+/- 3dB)
9 OFF ON ON OFF ON ON ON ON PFEER alert Intermittent 970 0.5Hz (1s On/1s Off) 8 48 107.4 (+/- 3dB)
10 ON OFF ON OFF ON ON ON ON ISO-8201 (steady pulse) Intermittent 970 3 x 500ms pulses, 1.5s silence, then repeat 8 48 106.8 (+/- 3dB)
11 OFF OFF ON OFF ON ON ON ON ISO-8201 (Positive sweep) Intermittent 800 to 970 3 x 500ms pulses, 1.5s silence, then repeat 8 48 102.5 (+/- 3dB)
12 ON ON OFF OFF ON ON ON ON ISO-8201 (Negative sweep) Intermittent 970 to 800 3 x 500ms pulses, 1.5s silence, then repeat 8 48 101.8 (+/- 3dB)
13 OFF ON OFF OFF ON ON ON ON General Purpose Continuous 2850 Steady 8 48 99.5 (+/- 3dB)
14 ON OFF OFF OFF ON ON ON ON General Purpose Sweep 2400 to 2850 1 Hz 8 48 99.0 (+/- 3dB)
15 OFF OFF OFF OFF ON ON ON ON General Purpose Sweep 2400 to 2850 7 Hz 8 48 87.8 (+/- 3dB)
16 ON ON ON ON OFF ON ON ON General Purpose Sweep 2400 to 2850 50 Hz 8 48 96.6 (+/- 3dB)
17 OFF ON ON ON OFF ON ON ON General Purpose Alternating 2400 & 2850 2 Hz 8 48 99.5 (+/- 3dB)
18 ON OFF ON ON OFF ON ON ON General Purpose Intermittent 970 0.8Hz (250ms On/1s Off) 8 48 101.6 (+/- 3dB)
19 OFF OFF ON ON OFF ON ON ON Swedish Air Raid Intermittent 660 3.3Hz (150ms On/150msOff) 8 48 103.4 (+/- 3dB)
20 ON ON OFF ON OFF ON ON ON Swedish All Clear Continuous 660 Steady 8 48 104.8 (+/- 3dB)
21 OFF ON OFF ON OFF ON ON ON Swedish General Purpose Intermittent 660 1Hz (500ms-500ms) 8 48 103.8 (+/- 3dB)
Any other switch setting gives tone 0
*Approved tone
Beacon Coverage
The Raptor conventional sounder with beacon (ZRPB/R & ZRPB/W) has a coverage
pattern of W 5.1 - 7.25 and a ash rate of 0.5 Hz.
7.25m
7.25m
7.25m
7.25m
5.1m
Technical Data
Model ZRP/R ZRP/W ZRPB/R ZRPB/W
Part Number 42-630 42-631 42-632 42-633
Colour Red White Red White
Flash Colour N/A N/A White ash White ash
Flash Rate N/A N/A 0.5 Hz 0.5 Hz
Beacon Coverage N/A N/A W 5.1 - 7.25 W 5.1 - 7.25
Sounder Output 107dB @1m +/- 3
Operating Voltage 17-30V DC
Quiescent Current 0 mA
Alarm Current 10 mA max 10 mA max 70 mA max 70 mA max
Sounder Type Type B (Outdoor use)
Operating Temperature -25oC to 70oC
Max Humidity 95% RH Non Condensing
IP Rating IP65 (certied to IP33C)
Size (H x W x D in mm ) 146 x 150 x 98 146 x 150 x 107.5
Weight (with Back Box) 540g 550g
Minimum sound output 74.5dB under Anechoic conditions