Zippity MAJESTIC User manual

WWW.ZIPPITY-OUTDOOR.COM
1
ASSEMBLY INSTRUCTIONS ZP19027
ZP19027
ASSEMBLY
INSTRUCTIONS
45 MIN
Approximate assembly me
Want to see a video on how to
assemble this product?
Scan the QR code
MAJESTIC
MAILBOX KIT WITH
PLANTER BOX
*Mailbox and mounng
hardware not included.
*
WWW.ZIPPITY-OUTDOOR.COM
VER. 061121

WWW.ZIPPITY-OUTDOOR.COM
2
ASSEMBLY INSTRUCTIONS
ZP19027
kCheck the inside of the larger pieces in your box for other
materials packed inside.
kWhen assembling components, place on a non-abrasive
surface (i.e. shipping box) to avoid scratching.
kWe recommend an area approximately 5’x 8’ for
unobstructed assembling.
kYou should not need to use excessive force when assembling
components.
VISIT OUR WEBSITE FIRST,
SO WE CAN HELP YOU RIGHT AWAY!
Although great care has been taken to ensure proper packaging
and handling of this product, occasionally problems occur. If you

our website to order replacement parts. If you experience any
further trouble with your product, please contact our customer
service department.
parts.nychbrands.com
[email protected]
704-892-5222 /877-234-6196
Customer service agents are available to take calls weekdays from 9am-
5pm EST. If you call outside of business hours, please leave a voicemail.
To help you quickly and accurately, please have reference item
number ZP19027
on page 4. It is helpful if you can provide the batch lot which is a
stamped number on the inside of the box.

this product, we are happy to assist you with the process, so
please give us a call at 704-892-5222 / 877-234-6196.
If for some reason you need to return this product, please

return the product, you will need to iniate the return from the
company you originally purchased from.
GENERAL
INFORMATION
MISSING OR
DAMAGED PARTS?
NEED ASSEMBLY
HELP?
NEED TO
RETURN?
IMPORTANT

WWW.ZIPPITY-OUTDOOR.COM
3
ASSEMBLY INSTRUCTIONS ZP19027
Ground
18 in
18 in
12 1/4 in
12 7/8 in
42 in
54 5/8 in
19 in 2 1/4 in
11 in
18 in 18 5/8 in

WWW.ZIPPITY-OUTDOOR.COM
4
ASSEMBLY INSTRUCTIONS
ZP19027
STEP 1: LAY OUT MATERIALS
A
D
G H I
E F
B C J
K
L
Post Cap (5)
Rear Board Wall (2)

Planter Box
Post (4)

Planter Box
Brace 

Pipe Anchor

Side Board Wall (2)

Front Board Wall

Post

Post Arm

⅝” Tek Screw (2)
3” Self-Drilling Stainless
Steel Screw (4)
1/8” Hardened
Steel Bit

WWW.ZIPPITY-OUTDOOR.COM
5
ASSEMBLY INSTRUCTIONS ZP19027
STEP 2: ASSEMBLE PLANTER BOX
STEP 2.1 STEP 2.2
Slide the Planter Box
Brace (H) down the Post
(B) as shown. Note the

the planter box brace.
Slide (2) Planter Box Posts (G)
down over each end of the front
board wall.
Slide (2) Side Board
Walls (E) down into place
as shown.
Insert the planter box brace into the
routed hole in the Front Board Wall (F). The
planter box brace will lock into place.
B
G
F
H
Notch facing
down.
STEP 2.3 STEP 2.4
Note: The groove in
the planter box posts

on the front board
wall.

WWW.ZIPPITY-OUTDOOR.COM
6
ASSEMBLY INSTRUCTIONS
ZP19027
STEP 3: INSTALL PIPE ANCHOR
STEP 2.5
STEP 3.1
STEP 2.6
Slide (2) planter
box posts over
the side board
walls as shown.
Locate where you would like the post to be installed. Using a sledge hammer, drive the Pipe
Anchor (I)
BEST BETTER
Slide the Rear
Board Walls (D)
down into place
as illustrated.
I
D
 
10lb Sledgehammer 5lb Sledgehammer Hammer
Note: Check if the pipe anchor is level in both direc-
ons at about 6” intervals as you pound it into the
ground. Usually, aer it is about 12” into the ground,
the trajectory is established, and you can no longer
level the Pipe Anchor.
18⅝”

WWW.ZIPPITY-OUTDOOR.COM
7
ASSEMBLY INSTRUCTIONS ZP19027
STEP 3.2 STEP 3.3

assembled unit, and place the
post over the pipe anchor.
(L), pre-drill
(2) holes through the post and pipe anchor as


(J).
J
L

WWW.ZIPPITY-OUTDOOR.COM
8
ASSEMBLY INSTRUCTIONS
ZP19027
STEP 4.1
STEP 5.1
STEP 4.2
Slide the Post
Arm (C) down over
the post as shown.
The top of the
post arm should be

the ground.
(A) into place as shown. You
can secure the post caps more permanently using PVC
glue if necessary.

Steel Screws (K) through the pre-
drilled holes on the post arm as
shown.
STEP 4: INSTALL POST ARM
STEP 5: INSTALL POST CAPS
C
A
42”
K
Note: Slightly angle the 2½”
self-drilling stainless steel
screws on one side to keep
them from running into each
other inside the post.

WWW.ZIPPITY-OUTDOOR.COM
9
ASSEMBLY INSTRUCTIONS ZP19027
WWW.ZIPPITY-OUTDOOR.COM
704-892-5222
877-234-6196
[e-mail]
6935 Reames Rd. Ste. K.
Charloe, NC 28216