ZIV TRS-10 User manual

TIMER
REMOTE
WITH VIDEO
USER MANUAL
TRS-10
COMPATIBLE WITH
SONY CAMERAS
WITH A MULTI-TERMINAL

1
PRECAUTIONS
• Please read and follow these instructions, and keep this
manual in a safe place.
• There are no user-serviceable parts inside the device. Do
not attempt to disassemble or perform any unauthorized
modification.
• Do not operate the unit in the presence of flammable gas
or vapors.
• Do not handle with wet hands or immerse in water or
expose to rain. Failure to observe these precautions could
result in fire or electric shock.
• Keep out of the reach of children. This device contains
small parts which may pose a choking hazard.
• Do not use or leave the device in conditions of extreme
heat, severe cold, or high humidity.
• Clean the unit with a soft, dry cloth.
• Make sure the item is intact and that there are no missing
parts.
• Handle the unit with care.
• All images are for illustrative purposes only.

2
* Press and hold together to set the receiver channel.
Use the directional pad to change the channel.
Note: The remote’s photo features are not available
for camcorder operation.
OVERVIEW
Transmitter
1. USB port
2. Indicator light
3. LCD screen
4. Bulb exposure [ ]
5. Single/continuous
shooting [ ]
6. Power/channel [ ]
7. Directional pad
8. Shutter button
9. Timed exposure [ ]
10. Video mode [ ]
11. Play/Stop button [ ]
12. Left select [ ]
13. Setting confirm [ ]
14. Numeric increase/
+zoom [ ]
15. Right select[ ]
16. Numeric decrease/
-zoom [ ]
Receiver
17. LCD screen
18. Indicator light
19. USB port
20. Battery cover
21. 2.5 mm trigger output
22. Channel increase/
video stop* [ ]
23. Power/Channel
decrease* [ ]
24. Cold-shoe mount
25. 1/4 in. mount

3
Transmitter
Receiver
2
3
5
6
7
8
17
18
19
20
21
12
13
10
11
15
14
22
23
24
25
16
4 9
1

4
SINGLE SHOOTING
1 Press [ ] until CS appears on the LCD screen.
2
Half press the shutter release button to focus.
3
Press fully to take a shot.
CONTINUOUS SHOOTING
1 Press [ ] until CS appears on the LCD screen.
2
Set your camera to a continuous shooting
mode.
3
Half press the shutter release button to focus.
4
Press and hold the shutter release to trigger
continuous shooting.
5
Release the shutter button to stop continuous
shooting.

5
DELAYED SHOOTING
1 Press and hold [ ] until Delay appears on the LCD screen.
2
Press the [ ] button until the onscreen
numbers are flashing. Use the directional pad
to change settings.
(Left digits = Number of shots)
(Right digits = Delay before shots)
3
Half press the shutter release button to focus.
4
Press fully to start countdown and exposures.
BULB SHOOTING
1 Set the camera and remote into Bulb mode.
2
Half press the shutter release button to focus.
3
Press fully to start Bulb shooting.
4
Press again to stop Bulb shooting.

6
TIMED SHOOTING
1 Press [ ] to enter timed shooting. Use the directional [ ] to switch between settings.
Press [ ] until numbers flash on the LCD, and
use the [ ] buttons to change the selected
values.
[DELAY] Delay before start time
[LONG] Exposure time
[INTVL] Interval between exposure
[N1] Number of shots
2
Press [ ] to start the sequence.
VIDEO SHOOTING
N1: Time Elapsed Video Recording
1 Press [ ] until N1 appears on the LCD screen.
2
Press [ ] to start video recording. Use the
[] buttons to adjust zoom.
3
Press [ ] again to stop recording.

7
N2: Timed Video Recording
1 Press and hold [ ] until N2 appears on the LCD screen.
2
Press [ ] until the time is flashing. Use the
[] buttons to change the value.
3
Press [ ] to start video recording. Use the
[] buttons to adjust zoom. Once the time
has run out, the remote will reset.
CONNECTIVITY AVAILABLE FUNCTIONS
Multi Interface Port
• Timed/ delayed/ bulb/ single and continuous shutter
release
• Optical and digital zoom
• Video shooting
3-pin Port
• Timed, delayed, bulb, single, and continuous shutter
release

8
Channels 32
Operation distance 328 ft. (100 m)
Transmitter standby 1000 hr.
Receiver standby 300 hr.
Power Transmitter
2 AAA batteries
Receiver
2 AAA batteries
Dimensions
(H × W × D)
Transmitter
5.35 × 1.8 × 0.66 in.
135.9 × 45.7 × 16.8 mm
Receiver
2.75 × 1.5 × 0.99 in.
70 × 38 × 25 mm
Weight Transmitter
1.6 oz. (45.4 g)
Receiver
1.2 oz. (34 g)
SPECIFICATIONS

ONE-YEAR LIMITED WARRANTY
This ZIV product is warranted to the original purchaser to be free from
defects in materials and workmanship under normal consumer use for
a period of one (1) year from the original purchase date or thirty (30)
days after replacement, whichever occurs later. The warranty provider’s
responsibility with respect to this limited warranty shall be limited solely
to repair or replacement, at the provider’s discretion, of any product
that fails during normal use of this product in its intended manner
and in its intended environment. Inoperability of the product or part(s)
shall be determined by the warranty provider. If the product has been
discontinued, the warranty provider reserves the right to replace it with
a model of equivalent quality and function.
This warranty does not cover damage or defect caused by misuse, neglect,
accident, alteration, abuse, improper installation or maintenance. EXCEPT
AS PROVIDED HEREIN, THE WARRANTY PROVIDER MAKES NEITHER
ANY EXPRESS WARRANTIES NOR ANY IMPLIED WARRANTIES,
INCLUDING BUT NOT LIMITED TO ANY IMPLIED WARRANTY OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. This
warranty provides you with specific legal rights, and you may also have
additional rights that vary from state to state.
To obtain warranty coverage, contact the Ziv Customer Service
Department to obtain a return merchandise authorization (“RMA”)
number, and return the defective product to Ziv along with the RMA
number and proof of purchase. Shipment of the defective product is at
the purchaser’s own risk and expense.
For more information or to arrange service, visit www.zivphotogear.com
or call Customer Service at 212-594-2353.
Product warranty provided by the Gradus Group.
www.gradusgroup.com
ZIV is a registered trademark of the Gradus Group.
© 2017 Gradus Group LLC. All Rights Reserved.
www.zivphotogear.com GG1