ZKTeco LS-PE1210G User manual
POE Splitter User Manual | April, 2019
ZKtechnology.com
POE Splitter
User Manual
5521DC Male
205+/-1mm
82+/-1mm
28+/-1mm
Input RJ45 Size
28+/-1mm
23.5+/-1mm
• LS-PE1210G is a high-performance optoelectronic isolation POE product complies
with the IEEE 802.3af Ethernet standard, and with the size of 28*82mm and wire
length of 205mm. The output power meets the power consumption demand of
over 90% camera.
• Chip: SD4952B. Compatible with 38~57V DC voltage, overvoltage protection.
• POE Standard: IEEE802.3af
• Compatible with non-standard 48V~57V power supply (only support with 45+78-).
• Output Power: 15.4W (12V/1A)
• Isolation: 1500V
• POE Power Pin: support both (1, 2)+/(3, 6)- and (4, 5)+/(7, 8)-
• Plug output: Data (1, 2)/(3, 6)
• Power Output by 5521DC Male (5.5*2.1mm).
POE Splitter User Manual | April, 2019
ZKtechnology.com
How to Use
Correct Connection
Using between POE Switch and NON-POE Device. The Active POE Splitter splits POE signal into a
12VDC power and 10/100Mbps Ethernet data source.
Power 12V + DATA Power 48V + DATA
CAT 5e CAT 5e
CAT 5e CAT 5e
DC Power plugRJ45 plug
NON-POE Device POE Device
Network Cable Power + DataActive POE Splitter 48V 12V
POE Splitter User Manual | April, 2019
ZKtechnology.com
Wrong Using Method
Incorrect Connections
Electrical Parameters
PoE Device
Active PoE Splitter Network Cable
PoE Switch
Using between POE Switch and POE Device
PoE Device
Active PoE Splitter Network Cable
Non PoE Switch
Using between NON-POE Switch and POE Device
Non PoE Device
Active PoE Splitter Network Cable
Non PoE Switch
Using between NON-POE Switch and NON-POE Device
Voltage Type POE Switch 48V Voltage Input
Parameter Index Minimum Rated Value Maximum
Input Voltage 38Vdc 51Vdc 57Vdc
Output Voltage 11.8V 12V 12.2V
Output Current 0.9A 1A 1.2A
Output Ripple 200mV Max
Eciency Above 85%
Short-Circuit Protection When the output to the ground short circuit, the product input power will be reduced and will not be
damaged. When the short circuit relieved, the product will automatically return to normal.
© Copyright 2018. ZKTeco Inc. ZKTeco Logo is a registered trademark of ZKTeco or a related company. All other product and company names mentioned are used for
identification purposes only and may be the trademarks of their respective owners. All specifications are subject to change without notice. All rights reserved.
