Zodiac Vortex OV 3400 User manual

Vortex™ range

Vortex™ range
The platform
Cyclonic suction
Motor tilted
Debris held in
suspension
- Limits filter clogging
- More power, less loss of suction

Vortex™ range
The platform
3 motors
Traction motor 1
The cleaner is fitted with a tilt sensor (accelerometer)
Suction pump motor -
Propeller tilted to 30°
Traction motor 2
Pump
motor

Vortex™ range
The platform
Suction inlet
Extra wide suction
inlet (27 cm)
Easy suction for all types of debris

Vortex™ range
The platform
The driving wheels
- Easier obstacle handling
- Better adhesion to the sides
- Optimised movement and coverage
Rear driving wheels
(depending on the model)
Front driving
wheels

Vortex™ range
The platform
The filter
3 filtration levels available:
-Very fine: 60µ (optional)
-Fine: 100µ (supplied)
-Wide: 200µ (optional)
Easy access
Very large 5L capacity
Filtration level
marker

Vortex™ range
The platform
The brushes
- Blue plate brushes (supplied)
- Contacts+ brushes (supplied or optional according to model)
Standard brushing (blue
plate brushes)
Reinforced brushing
(Contact+ brushes)

Vortex™ range
The platform
The tyres
For tiled pools, use "sucker" tyres which will have better grip
- Standard tyres (supplied)
- Sucker tyres (optional on the 2 driving wheel cleaners:
2WD)
Standard tyres
Sucker tyres
2 driving wheels
(2WD)
4 driving wheels
(4WD)

Vortex™ range
- Cleaner dries in vertical position to allow the water to
run off
- Handle to wind up the cable carefully and avoid it
becoming tangled
Comfortable to use
Easy to transport and store
Easy to assemble
The trolley or base (according to model)
The platform
or

Vortex™ range
Reduces the risk of tangling
Swivel (RV 5400 –RV 5500 –RV 5600)
swivel
The platform

Vortex™ range
Available as an option
Protects the appliances from rain or bad
weather
Practical and quick storage solution for
bathing season
The protective cover
The platform

Vortex™ range
Automatic safety features
The platform
Timer system Out-of-water safety Electronic motor
protection
The cleaner detects
that it is out of the
water and reverses to
turn over in the water
Autonomy
On start-up the cleaner
performs 3 tests to
check whether it is in
the water.
Reliability
The motor consumption
is controlled
Performance

Vortex™ range
Description
Package contents (according to model)
X2
X2 X2 X2

Vortex™ range
Start /
Stop the cleaner
Pool shape
Control indicator
Setting the time
"Clean filter" indicator
Cleaning cycle
programming
Removal from pool
mode
Increase or reduce the
cleaning time
Surface to clean
Switch on / off the remote
control
Cleaning intensity
Description
Presentation of the symbols (according to model)

Vortex™ range
Description
Technical characteristics
OV 3300
RV 4200
OV 3400 –OV 3410 - OV 3450 -
OV 3500
–OV 3510 - RV 4310 –RV 4400 –RV
4430 - RV 4460 –RV 5400 - RV 5470 -
JD clean 4x4
RV 4550
RV 4560
RV 5500
RV
5600
Control box power
supply voltage 220-240 VAC, 50 Hz
Cleaner power supply
voltage 30 VDC
Max absorbed power 150 W
Cable length 15 m 18 m 21 m 25 m
Cleaner dimensions
(L x W x h) 43 x 48 x 27 cm
Packaging dimensions
(L x W x h)
69 x 43 x
46 cm 56 x 56 x 46 cm
Cleaner weight 9.5 kg
Packaged weight 14 kg 19 kg
Theoretical cleaning
width 270 mm
Pump flow 16 m³/h

Vortex™ range
Description
Marking
"Filter access" button
Brushes
Linings
Handle
Front driving wheels
Rear driving wheels
(according to model)
Floating
cable (equipped
with
a swivel depending
on the model)

Vortex™ range
3.5 m minimum
Installation
Positioning
Minimum distance of 3.5 metres between the command
unit and the edge of the pool

Vortex™ range
Installation
Carriage assembly (according to model)
No tools or fixings required

Vortex™ range
Installation
Attachment to the base (according to model)
- Protects the command unit if the ground is flooded.
- Unit splash-proof but must not be immersed.

Vortex™ range
Use
Pool configuration
In ground
Above ground with stiff sides
All bottom
types
All shapes
The Vortex™ range adapts to each pool